{"title":"Turbo Intercooler Piping","description":"","products":[{"product_id":"ets-upper-intercooler-piping-kit-2008-2015-mitsubishi-evo-x-ets_evox_uicp","title":"ETS Upper Intercooler Piping Kit | 2008-2015 Mitsubishi Evo X (ETS_EVOX_UICP)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eMitsubishi Evolution X Upper Intercooler Pipe Kit by ETS\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe ETS Mitsubishi Evolution X Upper Pipe removes the restrictive factory pipe which necks down to 1.75\" before the turbo outlet and replaces it with a full 2.5\" upper intercooler pipe which helps with throttle response as well as reliability. The factory hoses are prone to ballooning and blowing off under high boost.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe upper intercooler piping starts with a smooth mandrel bent 2.5\" stock turbo outlet pipe which connects to the remainder of the hot side piping. The stock turbo outlet pipe is separate to allow it to be swapped out with the installation of our EVO X turbo kit to come so that the remainder of the upper piping can be retained. This ensures that you never have to \"upgrade an upgrade\" and spend more money on a new upper pipe when it comes time for a turbo kit. Making the connection from the turbo outlet pipe to the intercooler is a single-piece mandrel bent 2.5\" upper intercooler pipe.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2.50\" Mandrel Bent Piping\u003c\/li\u003e\n\u003cli\u003eUpgradable Upper Intercooler Pipe\u003c\/li\u003e\n\u003cli\u003eUpper Intercooler Pipe Bracket\u003c\/li\u003e\n\u003cli\u003e4-ply Silicone\u003c\/li\u003e\n\u003cli\u003eT-Bolt Clamps\u003c\/li\u003e\n\u003cli\u003eIncludes all mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note: California Residents - Prop 65 Warning.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2008 - 2015 Mitsubishi Evolution X\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - ETS Upper IC Pipe Set\u003c\/li\u003e\n\u003cli\u003e3 - Silicone Couplers\u003c\/li\u003e\n\u003cli\u003e6 - Clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"ETS","offers":[{"title":"Default Title","offer_id":31912434139209,"sku":"ETS 100-10-ICP-002","price":464.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/ETS-Upper-Intercooler-Piping-Kit-2008-2015-Mitsubishi-Evo-X-ETS_EVOX_UICP.jpg?v=1744464286"},{"product_id":"map-front-upper-intercooler-pipe-2008-2015-mitsubishi-evolution-x-evox-fuicp","title":"MAP Front Upper Intercooler Pipe | 2008-2015 Mitsubishi Evolution X (EVOX-FUICP)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eEvo X Front Intercooler Pipe\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe MAP Mitsubishi Evo X Front Upper Intercooler Pipe works with the MAP Rear Intercooler pipe to eliminate the factory aluminum pipe to increase power and reliability. It is mandrel bent and uses high quality 304 stainless steel to not only dress up your engine bay, but get that extra kick in horsepower!\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSmooth Mandrel Bends\u003c\/li\u003e\n\u003cli\u003e304 Stainless Steel Construction\u003c\/li\u003e\n\u003cli\u003e4-Ply Silicone Couplers\u003c\/li\u003e\n\u003cli\u003eT-Bolt Clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2008 - 2015 Mitsubishi Evolution X\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - MAP Front Upper Intercooler Pipe\u003c\/li\u003e\n\u003cli\u003eAll Mounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Instructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/files\/EVOX-FUICP.pdf?5340760892807971386\" target=\"“_blank”\" rel=\"“\" noreferrer=\"\"\u003eDownload Install Instructions Here\u003c\/a\u003e!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli id=\"warranty\"\u003eMAP Limited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"MAPerformance Fabrication","offers":[{"title":"Polished \/ No Thanks","offer_id":31912435777609,"sku":"MAP EVOX-FUICP","price":132.96,"currency_code":"USD","in_stock":true},{"title":"Polished \/ Add MAP Rear Upper Intercooler Pipe","offer_id":31912435810377,"sku":"MAP EVOX-ICPKIT","price":357.96,"currency_code":"USD","in_stock":true},{"title":"Wrinkle Black \/ No Thanks","offer_id":31912435843145,"sku":"MAP EVOX-FUICP-WB","price":212.96,"currency_code":"USD","in_stock":true},{"title":"Wrinkle Black \/ Add MAP Rear Upper Intercooler Pipe","offer_id":31912435875913,"sku":"MAP EVOX-ICPKIT-WB","price":476.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/MAP-Front-Upper-Intercooler-Pipe-2008-2015-Mitsubishi-Evolution-X-EVOX-FUICP.jpg?v=1744464296"},{"product_id":"map-rear-upper-intercooler-pipe-2008-2015-mitsubishi-evo-x-evox-ruicp","title":"MAP Rear Upper Intercooler Pipe | 2008-2015 Mitsubishi Evo X (EVOX-RUICP)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eMitsubishi Evolution 10 Rear Upper Intercooler Pipe Kit\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe MAPerformance Mitsubishi Evo X Intercooler Pipe works by replacing the factory pipe that necks down to 1.75\" at the turbo outlet with a full 2.5\" pipe to increase power and reliability. It is mandrel bent and uses high quality 304 stainless steel to not only dress up your engine bay, but get that extra kick in horsepower!\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne Piece Mandrel Bent Tubing\u003c\/li\u003e\n\u003cli\u003e304 Stainless Steel (Made in the USA)\u003c\/li\u003e\n\u003cli\u003e4-Ply Silicone Couplers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2008-2015 Mitsubishi Evo X\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Rear Upper Intercooler Pipe\u003c\/li\u003e\n\u003cli\u003e2 Silicone Couplers\u003c\/li\u003e\n\u003cli\u003e4 T-Bolt Clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli id=\"warranty\"\u003eMAP Limited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"MAPerformance Fabrication","offers":[{"title":"Brushed","offer_id":31912435941449,"sku":"MAP EVOX-RUICP","price":201.96,"currency_code":"USD","in_stock":true},{"title":"Wrinkle Black","offer_id":31912435974217,"sku":"MAP EVOX-RUICP-WB","price":269.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/MAP-Rear-Upper-Intercooler-Pipe-2008-2015-Mitsubishi-Evo-X-EVOX-RUICP.jpg?v=1744464306"},{"product_id":"perrin-charge-pipe-2015-2019-subaru-wrx-psp-itr-200","title":"Perrin Charge Pipe | 2015-2019 Subaru WRX (PSP-ITR-200)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003e2015-2019 Subaru WRX Charge Pipe by Perrin\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eReplace the restrictive OEM plastic charge pipe and increase airflow and intercooler efficiency. The OEM charge pipe on the FA20 DIT engine is restrictive, narrows down in certain points, and has pleats that make for uneven airflow. The PERRIN Charge Pipe has a perfectly smooth interior, constant radii, and gradual bends, making for much more efficient air delivery. All of this combined creates for increased intercooler efficiency.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003e\u003cspan\u003eThe PERRIN Charge Pipe comes with all the necessary connectors to install onto a stock system for greater compatibility. The CNC machined PERRIN turbo flange adapter uses the same design as the OEM flange on the turbo side of the charge pipe and uses the OEM o-ring for perfect fitment and no leaks, unlike off-the-shelf o-rings. The silicone connectors are reinforced multi-layered for durability and weather resistance.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConstructed from mandrel-bent aluminum tubing\u003c\/li\u003e\n\u003cli\u003ePowdercoating available in either red or black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIntercooler Side Diameter: 2.5\"\u003c\/li\u003e\n\u003cli\u003eTurbo Side Diameter: 2\"\u003c\/li\u003e\n\u003cli\u003eCharge Pipe Material: Mandrel Bent Aluminum\u003c\/li\u003e\n\u003cli\u003eCharge Pipe Finish: Wrinkle Powdercoat\u003c\/li\u003e\n\u003cli\u003eAdapter Flange Finish: Black Anodize\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2015 - 2019 Subaru WRX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - PERRIN Charge Pipe\u003c\/li\u003e\n\u003cli\u003e1 - PERRIN Coupler\u003c\/li\u003e\n\u003cli\u003e1 - PERRIN Turbo Adapter Coupler\u003c\/li\u003e\n\u003cli\u003e1 - PERRIN Turbo Adapter Flange\u003c\/li\u003e\n\u003cli\u003e1 - PERRIN License Plate Frame\u003c\/li\u003e\n\u003cli\u003eAll Necessary Hardware\u003c\/li\u003e\n\u003cli\u003eInstructions\u003c\/li\u003e\n\u003cli\u003eStickers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e5 Year Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/perrinperformance.com\/attachment\/337576-.pdf\" target=\"_blank\" title=\"Perrin PSP-ITR-200 Installation Instructions\" rel=\"noopener noreferrer\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Perrin Performance","offers":[{"title":"Black","offer_id":31912436039753,"sku":"PER PSP-ITR-200BK","price":453.96,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":31912436072521,"sku":"PER PSP-ITR-200RD","price":453.96,"currency_code":"USD","in_stock":true},{"title":"Neon Yellow","offer_id":31912436105289,"sku":"PER PSP-ITR-200NY","price":453.96,"currency_code":"USD","in_stock":true},{"title":"Teal","offer_id":31912436138057,"sku":"PER PSP-ITR-200TE","price":453.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Perrin-Charge-Pipe-2015-2019-Subaru-WRX-PSP-ITR-200.jpg?v=1744464316"},{"product_id":"ets-lp2-lower-intercooler-pipe-2003-2006-mitsubishi-evo-8-9-evo89_lp2","title":"ETS LP2 Lower Intercooler Pipe | 2003-2006 Mitsubishi Evo 8\/9 (Evo89_LP2)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eMitsubishi Evo 8\/9 LP2 Lower Intercooler Pipe by ETS\u003c\/h2\u003e\n\u003cp\u003eThe lower intercooler piping is possibly the biggest restriction in the intercooler system on the Evo. Just by installing the ETS Lower Intercooler Pipe you will gain 12hp in power and reduced lag time on initial spool up and improved transient response between gears. This piping can be installed by itself without a retune and allows you to upgrade the upper intercooler piping down the road. Our piping kit fit perfectly with both the stock and ETS intercoolers.\u003c\/p\u003e\n\u003cp\u003eThe ETS LP2 Lower Pipe for the Mitsubishi Evo 8 and 9 is the most powerful pipe on the market today. This pipe is the culmination of over 2 years of research and development, improving upon the average 7-9hp gains commonly found with most lower pipes on the market. Boasting a max hp increase of 12hp!\u003c\/p\u003e\n\u003cp\u003eThe ETS LP2 Lower Pipe delivers more power throughout a wider power band than any other pipe we tested including our previous ETS lower pipe.\u003c\/p\u003e\n\u003cp\u003eThe Key to this increased power output of the ETS LP2 Lower Pipe is the smooth and fast transition from 1.8\" to 2.5\" at the turbo outlet. In the past there were two main schools of thought on lower pipe design.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull Mandrel Bent 2.5\" Piping\u003c\/li\u003e\n\u003cli\u003eStainless Steel T-Bolt Clamps\u003c\/li\u003e\n\u003cli\u003e4-Ply Reinforced Silicone Couplers\u003c\/li\u003e\n\u003cli\u003eShort Route: Two feet shorter than stock when combined with the upper piping\u003c\/li\u003e\n\u003cli\u003eLower piping flows over 20% more than stock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note: California Residents - Prop 65 Warning\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2003 - 2006 Mitsubishi Evolution 8\/9\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - ETS LP2 Lower IC Pipe\u003c\/li\u003e\n\u003cli\u003e1 - Coupler\u003c\/li\u003e\n\u003cli\u003e2 - Clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"ETS","offers":[{"title":"Stock Turbo","offer_id":31912436170825,"sku":"ETS 100-20-ICP-153","price":312.96,"currency_code":"USD","in_stock":true},{"title":"ETS Garrett 2.5\" Outlet Turbo Kit","offer_id":31912436203593,"sku":"ETS 100-20-ICP-156","price":312.96,"currency_code":"USD","in_stock":true},{"title":"ETS Precision Turbo Kit","offer_id":31912436236361,"sku":"ETS 100-20-ICP-154","price":312.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/ETS-LP2-Lower-Intercooler-Pipe-2003-2006-Mitsubishi-Evo-89-Evo89_LP2.jpg?v=1744464324"},{"product_id":"ets-intercooler-piping-kit-2008-2015-mitsubishi-evo-x-evox_pipingkit","title":"ETS Intercooler Piping Kit | 2008-2015 Mitsubishi Evo X (EVOX_PipingKit)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eMitsubishi Evo X Intercooler Piping Kit by ETS\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe ETS EVO X intercooler piping kit is next in line and is a very cool modular package. The upper intercooler piping starts with a smooth mandrel bent 2.5\" stock turbo outlet pipe which connects to the remainder of the hot side piping. The stock turbo outlet pipe is separate to allow it to be swapped out with the installation of our EVO X turbo kit to come so that the remainder of the upper piping can be retained. This ensures that you never have to \"upgrade an upgrade\" and spend more money on a new upper pipe when it comes time for a turbo kit.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eMaking the connection from the turbo outlet pipe to the intercooler is a single-piece mandrel bent 2.5\" upper intercooler pipe. From the intercooler outlet the 2.5\" mandrel bent piping continues around the core support, with only two gradual radius bends in its entire length, to the lower intercooler pipe bracket before making a straight shot to the throttle body.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eETS 4-ply silicone and 100% SS T-bolt clamps are included for every connection to ensure that blown off intercooler piping stays a thing of the past\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2.50\" Mandrel Bent Piping\u003c\/li\u003e\n\u003cli\u003eUpgradable Upper Intercooler Pipe\u003c\/li\u003e\n\u003cli\u003eUpper Intercooler Pipe Bracket\u003c\/li\u003e\n\u003cli\u003eLower Intercooler Pipe Bracket\u003c\/li\u003e\n\u003cli\u003e4-ply Silicone Couplers\u003c\/li\u003e\n\u003cli\u003eT-Bolt Clamps\u003c\/li\u003e\n\u003cli\u003eIncludes all mounting hardware\u003c\/li\u003e\n\u003cli\u003eLower piping does not block the oil cooler ducting like some of the competitor pipes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note: California Residents - Prop 65 Warning.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2008 - 2015 Mitsubishi Evolution X\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - ETS Intercooler Pipe Set\u003c\/li\u003e\n\u003cli\u003eCouplers and Clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"ETS","offers":[{"title":"Wrinkle Black","offer_id":31912438136905,"sku":"ETS 100-10-ICP-001","price":1016.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/ETS-Intercooler-Piping-Kit-2008-2015-Mitsubishi-Evo-X-EVOX_PipingKit.jpg?v=1744464340"},{"product_id":"map-lower-intercooler-pipe-2008-2015-mitsubishi-evo-x-evox-licp","title":"MAP Lower Intercooler Pipe | 2008-2015 Mitsubishi Evo X (EVOX-LICP)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eLower Intercooler Pipe\u003c\/h2\u003e\n\u003cp\u003eAll MAPerformance fabricated products are hand made in house by very skilled fabricators. We bend our own tubing, machine our own flanges, design jigs, weld, port, and R\u0026amp;D right here in the USA with locally sourced raw material. All fabricated products carry a lifetime guarantee against cracking\/warping\/failing. So buy with confidence, know that you are getting the best product on the market for your vehicle!\u003c\/p\u003e\n\u003cp\u003eThe MAP EVO X Lower Intercooler Pipe is a significant upgrade over the factory GSR or MR (USDM and JDM) intercooler pipe. It is designed to be a one piece unit to avoid having to use excess couplers, and to have the smoothest transition from the intercooler to the throttle body. It also incorporates a bracket to hold the lower radiator hose just like the factory pipe. It requires no modification for install and can be completed in under 2 hours.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2.5\" Mandrel Bent 304SS USA-Made Stainless Steel Tubing\u003c\/li\u003e\n\u003cli\u003eSquirrelly Performance Stainless T-bolt Clamps\u003c\/li\u003e\n\u003cli\u003e4 Ply Squirrelly Performance Silicone Couplers\u003c\/li\u003e\n\u003cli\u003eFully Tig Welded with back-purge\u003c\/li\u003e\n\u003cli\u003eUtilizes factory BOV connection\u003c\/li\u003e\n\u003cli\u003eFits GSR and MR, USDM and JDM\u003c\/li\u003e\n\u003cli\u003eWill work with factory airbox\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2008-2015 Mitsubishi Evo 10\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Lower Intercooler Pipe\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Instructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/files\/EVOX-LICP.pdf?11063544662204692552\" target=\"“_blank”\" rel=\"“\" noreferrer=\"\"\u003eDownload Install Instructions Here\u003c\/a\u003e!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli id=\"warranty\"\u003eMAP Limited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"MAPerformance Fabrication","offers":[{"title":"Polished","offer_id":31912438235209,"sku":"MAP EVOX-LICP","price":345.96,"currency_code":"USD","in_stock":true},{"title":"Wrinkle Black","offer_id":31912438267977,"sku":"MAP EVOX-LICP-WB","price":412.96,"currency_code":"USD","in_stock":true},{"title":"Wrinkle Red","offer_id":31912438300745,"sku":"MAP EVOX-LICP-WR","price":412.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/MAP-Lower-Intercooler-Pipe-2008-2015-Mitsubishi-Evo-X-EVOX-LICP.jpg?v=1744464346"},{"product_id":"ets-stock-route-2-5-upper-intercooler-piping-kit-2003-2006-mitsubishi-evo-8-9-ets_evo8_uicp","title":"ETS Stock Route 2.5inch Upper Intercooler Piping Kit | 2003-2006 Mitsubishi Evo 8\/9 (ETS_Evo8_UICP)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eMitsubishi Evolution 8\/9 Upper Intercooler Pipes by ETS\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe ETS Evo Piping kit is designed to eliminate many of the unnecessary bends in the stock piping. Our complete piping kit starts off by immediately expanding into 2.5\" right off of the turbo elbow. This replaces the tiny 1 3\/4\" factory pipe and instantly adds an extra 15hp and greatly improves spool. From here it follows the core support and wraps around to the intercooler. Once the air passes through the intercooler, it wraps around the core support up and around the stock battery location to the throttle body.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eQuickest spool and world record proven performance. This ETS Mitsubishi Evo 8 and 9 2.5\" stock route intercooler piping has the smoothest transitions of any piping on the market. Allowing you IX or VIII to spool up quicker, run cooler, and more efficiently.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003e\u003cstrong\u003ePlease Note: Does not fit stock air box\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for Stock Intake Manifold\u003c\/li\u003e\n\u003cli\u003eComplete Upper Intercooler Piping Kit (Lower Pipe Sold Separately)\u003c\/li\u003e\n\u003cli\u003eFits Stock Battery, Does Not Fit Stock Air Box\u003c\/li\u003e\n\u003cli\u003eStainless Steel Mandrel Bent Piping\u003c\/li\u003e\n\u003cli\u003eLower piping flows over 20% more\u003c\/li\u003e\n\u003cli\u003eUpper Piping flows over 12% more\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2003 - 2006 Mitsubishi Evolution 8\/9\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 - ETS Upper IC Pipes\u003c\/li\u003e\n\u003cli\u003e2 - Silicone Couplers\u003c\/li\u003e\n\u003cli\u003e4 - Clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"ETS","offers":[{"title":"2.75\" \/ Speed Density","offer_id":31912438693961,"sku":"ETS 100-20-ICP-079","price":632.96,"currency_code":"USD","in_stock":true},{"title":"3.00\" \/ Speed Density","offer_id":31912438726729,"sku":"ETS 100-20-ICP-080","price":632.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/ETS-Stock-Route-2_5inch-Upper-Intercooler-Piping-Kit-2003-2006-Mitsubishi-Evo-89-ETS_Evo8_UICP.jpg?v=1744464375"},{"product_id":"ultimate-racing-upper-intercooler-pipe-kit-2008-2015-mitsubishi-evo-x-200341","title":"Ultimate Racing Upper Intercooler Pipe Kit | 2008-2015 Mitsubishi Evo X (200341)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eEvo X Upper Intercooler Pipe Kit by Ultimate Racing\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003e2.5in Stainless Steel piping replaces both upper pipes from the turbocharger to the intercooler. This is a bolt-on solution for the Mitsubishi Evolution X, and comes with 3-ply silicone couplers. Available in Polished Stainless Steel or Wrinkle Black Powdercoat.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReplaces both upper pipes from turbocharger to intercooler\u003c\/li\u003e\n\u003cli\u003e2.5\" Stainless Steel Piping\u003c\/li\u003e\n\u003cli\u003eBead Rolled Pipe Ends\u003c\/li\u003e\n\u003cli\u003e3-ply Silicone Hose\u003c\/li\u003e\n\u003cli\u003eBolt-On\u003c\/li\u003e\n\u003cli\u003ePolished or Wrinkle Black Piping\u003c\/li\u003e\n\u003cli\u003eBlue or Black Silicone Hose\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2008 - 2015 Mitsubishi Evolution X\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 - Upper Intercooler Pipes\u003c\/li\u003e\n\u003cli\u003e4 - Silicone Couplers\u003c\/li\u003e\n\u003cli\u003eMounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer's Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Ultimate Racing","offers":[{"title":"Polished \/ Black","offer_id":31912438825033,"sku":"ULT 200341P_BK\/SH","price":271.96,"currency_code":"USD","in_stock":true},{"title":"Polished \/ Blue","offer_id":31912438857801,"sku":"ULT 200341P_BL\/SH","price":271.96,"currency_code":"USD","in_stock":true},{"title":"Wrinkle Black (+$25.00) \/ Black","offer_id":31912438890569,"sku":"ULT 200341WB_BK\/SH","price":312.96,"currency_code":"USD","in_stock":true},{"title":"Wrinkle Black (+$25.00) \/ Blue","offer_id":31912438923337,"sku":"ULT 200341WB_BL\/SH","price":312.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Ultimate-Racing-Upper-Intercooler-Pipe-Kit-2008-2015-Mitsubishi-Evo-X-200341.jpg?v=1744464380"},{"product_id":"grimmspeed-charge-pipe-kit-2015-2020-subaru-wrx-090113","title":"GrimmSpeed Charge Pipe Kit | 2015-2020 Subaru WRX (090113)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003e2015-2020 Subaru WRX Charge Pipe Kit by Grimmspeed\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe GrimmSpeed Charge Pipe kit replaces the restrictive plastic stock unit on the FA20 powered WRX with larger diameter CNC mandrel bent aluminum tubing and custom formed silicone. The increased diameter 2.5in tubing and large radius bends decrease restriction for the charge air, which results in increased performance and decreased time to spool. Beautiful texture black powdercoat, a subtle screen printed GrimmSpeed logo, and hidden silicone top off the aesthetics of the GrimmSpeed Charge Pipe and provide an upgraded OEM-like appearance.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003e\u003cstrong\u003eFitment with some aftermarket radiators may require the use of a slimmer radiator fan setup\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTubing and turbo outlet adapter constructed of US sourced 6061 aluminum\u003c\/li\u003e\n\u003cli\u003eSmooth gradual transitions from the tapered turbo adapter, all the way to the intercooler\u003c\/li\u003e\n\u003cli\u003eSilicone used to insulate against the hot turbo area, aluminum used to further reject heat from the hot charge air\u003c\/li\u003e\n\u003cli\u003eCNC machined turbo flange designed for custom O-ring, preventing a common failure of other aftermarket charge pipes\u003c\/li\u003e\n\u003cli\u003eDoes not unnecessarily relocate bypass valve, reducing components and making installation faster and easier\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2015-2020 Subaru WRX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCharge Pipe\u003c\/li\u003e\n\u003cli\u003eSilicone Couplers\u003c\/li\u003e\n\u003cli\u003eTurbo Flange\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGrimmSpeed Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/files\/GrimmSpeed_FA20_charge_pipe_Install_Guide.pdf?1789095569624756279\" target=\"_blank\" title=\"GrimmSpeed FA20 Charge Pipe Installation Guide 090113\" rel=\"noopener noreferrer\"\u003eInstallation Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"GrimmSpeed","offers":[{"title":"Black","offer_id":31912439021641,"sku":"GRI 090113","price":392.96,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":31912439054409,"sku":"GRI 090250","price":392.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/GrimmSpeed-Charge-Pipe-Kit-2015-2020-Subaru-WRX-090113.jpg?v=1744464387"},{"product_id":"map-2-5-lower-intercooler-pipe-2003-2007-mitsubishi-evo-8-9-evo-lic","title":"MAP 2.5inch Lower Intercooler Pipe | 2003-2007 Mitsubishi Evo 8\/9 (EVO-LIC)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003e2.5\" Lower Intercooler Pipe\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThis MAP lower intercooler pipe features one piece mandrel bent 304 stainless steel tubing (Made in the USA) that has been bead rolled and routed with optimal flow characteristics in mind. This kit includes a 2.5\" to 1.75\" reducing elbow that yields the smoothest possible transition from the turbo outlet and matching T-bolt clamps so that you have everything needed for installation.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003e\u003cb\u003eCeramic Coating:\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003eOur advanced ceramic coating option helps control heat soak. The piece is coated in a thermal barrier (available in black\u003c\/span\u003e\u003cspan\u003e only\u003c\/span\u003e\u003cspan\u003e) that looks great and protect wires and hoses from heat. Please note the coating may need some extra \"curing\" to prevent flaking after installation. Please allow the part to heat up during normal driving or idling and then completely cool before putting it through it's paces.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne piece design\u003c\/li\u003e\n\u003cli\u003e304 stainless steel\u003c\/li\u003e\n\u003cli\u003eMandrel bent and designed for optimal flow\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2003-2007 Mitsubishi Evo 8\/9\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Lower Intercooler Pipe\u003c\/li\u003e\n\u003cli\u003e2.5 to 1.75 Coupler\u003c\/li\u003e\n\u003cli\u003e2 Clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli id=\"warranty\"\u003eMAP Limited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"MAPerformance Fabrication","offers":[{"title":"Brushed Stainless Steel","offer_id":31912439087177,"sku":"MAP EVO-LICP","price":320.96,"currency_code":"USD","in_stock":true},{"title":"Advanced Ceramic Coating \/ Black","offer_id":31912439119945,"sku":"MAP EVO-LICP-BLK","price":363.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/MAP-2_5inch-Lower-Intercooler-Pipe-2003-2007-Mitsubishi-Evo-89-EVO-LIC.jpg?v=1744464392"},{"product_id":"ets-rear-upper-pipe-only-2008-2015-mitsubishi-evo-x-ets-evo-x-upper-only","title":"ETS Rear Upper Pipe Only | 2008-2015 Mitsubishi Evo X (ETS-Evo-X-Upper-Only)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eMitsubishi Evolution X Rear Upper Intercooler Pipe by ETS\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe ETS Mitsubishi Evolution X Upper Pipe removes the restrictive factory pipe which necks down to 1.75\" before the turbo outlet and replaces it with a full 2.5\" upper intercooler pipe which helps with throttle response as well as reliability. The factory hoses are prone to ballooning and blowing off under high boost.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2.50\" Mandrel Bent Piping\u003c\/li\u003e\n\u003cli\u003eUpper Intercooler Pipe Bracket\u003c\/li\u003e\n\u003cli\u003e4-ply Silicone\u003c\/li\u003e\n\u003cli\u003eT-Bolt Clamps\u003c\/li\u003e\n\u003cli\u003eIncludes all mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note: California Residents - Prop 65 Warning\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2008 - 2015 Mitsubishi Evolution X\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - ETS Rear Upper IC Pipe\u003c\/li\u003e\n\u003cli\u003eCouplers and Clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"ETS","offers":[{"title":"Default Title","offer_id":31912439152713,"sku":"ETS 100-10-ICP-006","price":232.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/ETS-Rear-Upper-Pipe-Only-2008-2015-Mitsubishi-Evo-X-ETS-Evo-X-Upper-Only.jpg?v=1744464396"},{"product_id":"ets-short-route-complete-intercooler-piping-kit-2003-2006-mitsubishi-evo-8-9-evo89_short_route_piping_kit","title":"ETS Short Route Complete Intercooler Piping Kit | 2003-2006 Mitsubishi Evo 8\/9 (EVO89_Short_Route_Piping_Kit)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eMitsubishi Evo 8\/9 Short Route Complete IC Piping by ETS\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe ETS Evo Piping kit is designed to eliminate many of the unnecessary bends in the stock piping. Our complete piping kit starts off by immediately expanding into 2.5\" right off of the turbo elbow. This replaces the tiny 1 3\/4\" factory pipe and instantly adds an extra 15hp and greatly improves spool. From here it follows the core support and wraps around to the intercooler.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eOnce the air passes through the intercooler, the piping takes a short direct path around the core support, over the transmission and straight up to the throttle body. This unique routing is over two feet shorter than the stock routing which results in greatly improved spool.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStainless Steel Mandrel Bent Piping\u003c\/li\u003e\n\u003cli\u003eShort Route: Two feet shorter than stock\u003c\/li\u003e\n\u003cli\u003eLower piping flows over 20% more\u003c\/li\u003e\n\u003cli\u003eUpper Piping flows over 12% more\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePLEASE NOTE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRecirculation kit is only needed for Mini Battery route.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2003 - 200 Mitsubishi Lancer Evolution 8\/9\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - Short Route Piping Set (Upper and Lower)\u003c\/li\u003e\n\u003cli\u003e4 - Couplers\u003c\/li\u003e\n\u003cli\u003e7 - Clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"ETS","offers":[{"title":"2.75\" \/ Stock MAF \/ TiAL BOV with Recirculation Coupler","offer_id":31912441249865,"sku":"ETS 100-20-ICP-159","price":981.96,"currency_code":"USD","in_stock":true},{"title":"2.75\" \/ Stock MAF \/ HKS BOV with Recirculation Coupler","offer_id":31912441282633,"sku":"ETS 100-20-ICP-160","price":981.96,"currency_code":"USD","in_stock":true},{"title":"3.00\" \/ Stock MAF \/ TiAL BOV with Recirculation Coupler","offer_id":31912441315401,"sku":"ETS 100-20-ICP-162","price":981.96,"currency_code":"USD","in_stock":true},{"title":"3.00\" \/ Stock MAF \/ HKS BOV with Recirculation Coupler","offer_id":31912441348169,"sku":"ETS 100-20-ICP-163","price":981.96,"currency_code":"USD","in_stock":true},{"title":"2.75\" \/ Speed Density \/ TiAL BOV with Recirculation Coupler","offer_id":31912441380937,"sku":"ETS 100-20-ICP-165","price":981.96,"currency_code":"USD","in_stock":true},{"title":"2.75\" \/ Speed Density \/ HKS BOV with Recirculation Coupler","offer_id":31912441413705,"sku":"ETS 100-20-ICP-166","price":981.96,"currency_code":"USD","in_stock":true},{"title":"3.00\" \/ Speed Density \/ TiAL BOV with Recirculation Coupler","offer_id":31912441446473,"sku":"ETS 100-20-ICP-168","price":981.96,"currency_code":"USD","in_stock":true},{"title":"3.00\" \/ Speed Density \/ HKS BOV with Recirculation Coupler","offer_id":31912441479241,"sku":"ETS 100-20-ICP-169","price":981.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/ETS-Short-Route-Complete-Intercooler-Piping-Kit-2003-2006-Mitsubishi-Evo-89-EVO89_Short_Route_Piping_Kit.jpg?v=1744464428"},{"product_id":"map-intercooler-charge-pipe-upgrade-kit-2015-ford-mustang-ecoboost-ebm-cpk","title":"MAP Intercooler Charge Pipe Upgrade Kit | 2015+ Ford Mustang Ecoboost (EBM-CPK)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eEcoboost Charge Pipe By MAPerformance\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eAll MAPerformance fabricated products are hand made in house by very skilled fabricators. We bend our own tubing, machine our own flanges, design jigs, weld, port, and R\u0026amp;D right here in the USA with locally sourced raw material. All fabricated products carry a lifetime guarantee against cracking\/warping\/failing. So buy with confidence, know that you are getting the best product on the market for your vehicle!\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe MAP Charge Pipe Upgrade Kit was designed to replace the factory plastic intercooler pipes. Not only do the units look terrible, but they also have been known to pop off due to the factory couplers having a slippery texture paired with weak worm-drive clamps. Our kit includes high quality Squirrelly Performance 4-ply couplers with Stainless T-bolt clamps to prevent any intercooler popping.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eTurbosmart Smart Port Supersonic BOV recommended for use with this kit specifically by Turbosmart!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e Additional Lines and Hardware come with BOV but will not be used!\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMandrel Bent 304SS USA-Made Stainless Steel Tube\u003c\/li\u003e\n\u003cli\u003eFully Tig welded and backpurged\u003c\/li\u003e\n\u003cli\u003eEliminates the factory BOV\u003c\/li\u003e\n\u003cli\u003eStainless T-bolt Clamps\u003c\/li\u003e\n\u003cli\u003eSquirrelly Performance 4-ply Couplers\u003c\/li\u003e\n\u003cli\u003eAvailable in Raw Stainless or Wrinkle Black (custom colors available for small fee)\u003c\/li\u003e\n\u003cli\u003eFeatures bracket to mount the wire harness just like factory\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2015+ Ford Mustang Ecoboost 2.3L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCharge Piping Upgrade\u003c\/li\u003e\n\u003cli\u003eTurbosmart Supersonic or HKS BOV\u003c\/li\u003e\n\u003cli\u003eNecessary Couplers and Clamps\u003c\/li\u003e\n\u003cli\u003eHarness for users without a Cobb Accessport\u003c\/li\u003e\n\u003cli\u003ePlug for VTA or 25mm Plumb back fitting for VTA\u003c\/li\u003e\n\u003cli\u003eThis kit includes a vacuum line \u0026amp; t-fitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli id=\"warranty\"\u003eMAP Limited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"MAPerformance Fabrication","offers":[{"title":"Raw Stainless \/ Smart Port Supersonic","offer_id":31912442888265,"sku":"MAP EBM-CPK","price":824.96,"currency_code":"USD","in_stock":true},{"title":"Raw Stainless \/ HKS","offer_id":31912442921033,"sku":"MAP EBM-CPK_HKS","price":891.96,"currency_code":"USD","in_stock":true},{"title":"Wrinkle Black \/ Smart Port Supersonic","offer_id":31912442953801,"sku":"MAP EBM-CPK-WB","price":899.96,"currency_code":"USD","in_stock":true},{"title":"Wrinkle Black \/ HKS","offer_id":31912442986569,"sku":"MAP EBM-CPK-WB_HKS","price":967.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/MAP-Intercooler-Charge-Pipe-Upgrade-Kit-2015-Ford-Mustang-Ecoboost-EBM-CPK.jpg?v=1744464453"},{"product_id":"ultimate-racing-lower-intercooler-pipe-kit-2008-2015-mitsubishi-evo-x-200401","title":"Ultimate Racing Lower Intercooler Pipe Kit | 2008-2015 Mitsubishi Evo X (200401)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eEvolution X Lower Intercooler Piping by Ultimate Racing\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe Ultimate Racing Lower Intercooler Pipe Kit for the 2008-2015 Mitsubishi Evolution X is a direct bolt-on replacement for the lower piping from the intercooler to the throttle body. Constructed from stainless steel, the 2.5\" piping features bead-rolled pipe ends and a polished finish. A wrinkle black finish is also available.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eIncludes 3-ply silicone couplers, available in blue or black.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBolt-on upgrade for intercooler piping to the throttle body\u003c\/li\u003e\n\u003cli\u003e2.5\" stainless steel piping w\/ bead rolled pipe ends\u003c\/li\u003e\n\u003cli\u003e3-ply silicone couplers available in black or blue\u003c\/li\u003e\n\u003cli\u003ePiping available in polished or wrinkle black finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2008 - 2015 Mitsubishi Lancer Evolution X\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 - Lower Intercooler Pipes\u003c\/li\u003e\n\u003cli\u003eCouplers and Clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUltimate Racing Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Ultimate Racing","offers":[{"title":"Polished Finish \/ Black Couplers","offer_id":31912445149257,"sku":"ULT 200401P_BK\/SH","price":312.96,"currency_code":"USD","in_stock":true},{"title":"Polished Finish \/ Blue Couplers","offer_id":31912445182025,"sku":"ULT 200401P_BL\/SH","price":312.96,"currency_code":"USD","in_stock":true},{"title":"Wrinkle Black (+$25.00) \/ Black Couplers","offer_id":31912445214793,"sku":"ULT 200401WB_BK\/SH","price":352.96,"currency_code":"USD","in_stock":true},{"title":"Wrinkle Black (+$25.00) \/ Blue Couplers","offer_id":31912445247561,"sku":"ULT 200401WB_BL\/SH","price":352.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Ultimate-Racing-Lower-Intercooler-Pipe-Kit-2008-2015-Mitsubishi-Evo-X-200401.jpg?v=1744464468"},{"product_id":"ams-black-upper-intercooler-pipe-hot-pipe-2008-2015-mitsubishi-evo-x-ams-04-09-0002-2","title":"AMS Black Upper Intercooler Pipe \/ Hot Pipe | 2008-2015 Mitsubishi Evo X (AMS.04.09.0002-2)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eAMS Mitsubishi Lancer Evolution X Upper Intercooler Pipe \/ Hot Pipe *Black*\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe AMS EVO X Upper Intercooler Pipe (UICP) is a direct replacement for your factory upper intercooler pipe. Made from lightweight 2.5” mandrel bent aluminum tubing this pipe includes features such as a smooth, non-turbulent 2” – 2.5” transition for maximum performance. The pipe ends are bead rolled and the assembly is mounted to the core support (in the factory location) to help prevent couplers from popping off under boost. All the factory couplers are replaced with quality 4-ply silicone pieces which can endure 50 + psi of boost! We also utilize a silicone “hump hose” to prevent torn couplers caused by engine movement. Our UICP is professionally TIG welded in house by our master fabricators and is available polished or black wrinkle powder coated. By simply installing this Upper Intercooler Pipe you can expect to see 5 awhp peak and 10+ awhp gains in the midrange over stock without even re-tuning the ECU!\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfessionally TIG welded\u003c\/li\u003e\n\u003cli\u003eBead rolled pipe ends\u003c\/li\u003e\n\u003cli\u003eFactory style core support strap\u003c\/li\u003e\n\u003cli\u003e4 Ply silicone couplers and new hose clamps\u003c\/li\u003e\n\u003cli\u003e4 Ply silicone ”hump hose” coupler to allow engine movement\u003c\/li\u003e\n\u003cli\u003eBlack wrinkle powder coat finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2.5” aluminum mandrel bent piping\u003c\/li\u003e\n\u003cli\u003eSmooth silicone 2 – 2.5” transition for unmatched air flow\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2008-2015 Mitsubishi Evo X\u003cbr\u003e\u003cbr\u003eFits all USDM, JDM and European Models\u003cbr\u003eFits all aftermarket intercoolers with factory outlet angle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Pipes\u003c\/li\u003e\n\u003cli\u003e(3) Silicone Hoses\u003c\/li\u003e\n\u003cli\u003eClamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReferences\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.amsperformance.com\/wp-content\/uploads\/bsk-pdf-manager\/amsevo10uicpinstructions_43.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eInstallation Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"AMS Performance","offers":[{"title":"Default Title","offer_id":31912445280329,"sku":"AMS AMS.04.09.0002-2","price":465.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/AMS-Black-Upper-Intercooler-Pipe-Hot-Pipe-2008-2015-Mitsubishi-Evo-X-AMS_04_09_0002-2.jpg?v=1744464470"},{"product_id":"ams-upper-intercooler-pipe-hot-pipe-2008-2015-mitsubishi-evo-x-ams-04-09-0002-1","title":"AMS Upper Intercooler Pipe \/ Hot Pipe | 2008-2015 Mitsubishi Evo X (AMS.04.09.0002-1)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eAMS Mitsubishi Lancer Evolution X Upper Intercooler Pipe \/ Hot Pipe *Polished*\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe AMS EVO X Upper Intercooler Pipe (UICP) is a direct replacement for your factory upper intercooler pipe. Made from lightweight 2.5\" mandrel bent aluminum tubing this pipe includes features such as a smooth, non-turbulent 2\" - 2.5\" transition for maximum performance. The pipe ends are bead rolled and the assembly is mounted to the core support (in the factory location) to help prevent couplers from popping off under boost. All the factory couplers are replaced with quality 4-ply silicone pieces which can endure 50 + psi of boost! We also utilize a silicone “hump hose\" to prevent torn couplers caused by engine movement. Our UICP is professionally TIG welded in house by our master fabricators and is available polished or black wrinkle powder coated. By simply installing this Upper Intercooler Pipe you can expect to see 5 awhp peak and 10+ awhp gains in the midrange over stock without even re-tuning the ECU!\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfessionally TIG welded\u003c\/li\u003e\n\u003cli\u003eCNC AMS badge\u003c\/li\u003e\n\u003cli\u003eBead rolled pipe ends\u003c\/li\u003e\n\u003cli\u003eFactory style core support strap\u003c\/li\u003e\n\u003cli\u003e4 Ply silicone couplers and new hose clamps\u003c\/li\u003e\n\u003cli\u003e4 Ply silicone ”hump hose” coupler to allow engine movement\u003c\/li\u003e\n\u003cli\u003e2.5\" aluminum mandrel bent piping\u003c\/li\u003e\n\u003cli\u003eSmooth 2 - 2.5\" transition for unmatched air flow\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2008-2015 Mitsubishi Evo X\u003cbr\u003eUSDM, JDM and EDM compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(2) 6061 mandrel bent aluminum piping\u003c\/li\u003e\n\u003cli\u003e(3) ply silicone couplers and transition hoses\u003c\/li\u003e\n\u003cli\u003e(6) T-bolt clamps\u003c\/li\u003e\n\u003cli\u003eDetailed installation guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReferences\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.amsperformance.com\/wp-content\/uploads\/bsk-pdf-manager\/amsevo10uicpinstructions_43.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eInstallation Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"AMS Performance","offers":[{"title":"Default Title","offer_id":31912445313097,"sku":"AMS AMS.04.09.0002-1","price":388.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/AMS-Upper-Intercooler-Pipe-Hot-Pipe-2008-2015-Mitsubishi-Evo-X-AMS_04_09_0002-1.jpg?v=1744464472"},{"product_id":"ets-neon-srt-4-charge-pipe-upgrade-2003-2005-dodge-neon-srt-4-ets-srt4-chp","title":"ETS Neon SRT-4 Charge Pipe Upgrade | 2003-2005 Dodge Neon SRT-4 (ETS-SRT4-CHP)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eETS Charge Pipe for SRT-4 Neon\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eSo you have a stock turbo and you want to free up some flow to the intercooler? We have the answer for you. The ETS charge pipe will allow more airflow to the intercooler due to eliminating the restriction in the stock charge pipe (pipe that goes from the turbo to the hot side intercooler pipe).\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe stock pipe necks down to 1.6\" but the ETS pipe stays 2.5 all the way from the turbo to the hot side pipe. The upgraded charge pipe will make your turbo spool earlier, make more power, and take some strain off the turbo driving your car.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003e2 PSI drops have been seen after installing this pipe on some cars. The pipe includes all the SS t-bolt clamps and blue 4 ply couplers required for the install.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2.5\" Mandrel Bend Piping\u003c\/li\u003e\n\u003cli\u003eWorks with Stock Intercooler\u003c\/li\u003e\n\u003cli\u003eIncreased Boost Response\u003c\/li\u003e\n\u003cli\u003eIncreased Boost with no other mods\u003c\/li\u003e\n\u003cli\u003e4 Plys Silicone Coupler\u003c\/li\u003e\n\u003cli\u003eStainless T-Bolt Clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2003-2005 Dodge Neon SRT-4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Charge Pipe\u003c\/li\u003e\n\u003cli\u003eClamps \u0026amp; Coupler\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eETS Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"ETS","offers":[{"title":"Wrinkle Black","offer_id":31912445345865,"sku":"ETS 500-10-ICP-001","price":312.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/ETS-Neon-SRT-4-Charge-Pipe-Upgrade-2003-2005-Dodge-Neon-SRT-4-ETS-SRT4-CHP.jpg?v=1744464475"},{"product_id":"evo-x-ams-lower-intercooler-pipe-kit-polished-ams-ams-04-09-0003-1","title":"Evo X AMS Lower Intercooler Pipe Kit - Polished (AMS AMS.04.09.0003-1)","description":"\u003ch2 style=\"font-size:\n 1.2rem;\"\u003eEvo X AMS Lower Intercooler Pipe Kit - Polished (AMS AMS.04.09.0003-1)\u003c\/h2\u003e\n \u003cdiv align=\"center\"\u003e \u003ceol\u003e  \u003cp\u003e\u003c\/p\u003e \u003ceol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\n\u003c\/div\u003e \u003ceol\u003e\u003cp\u003eThe AMS EVO X Lower Intercooler Pipe (LICP) is a direct replacement for your factory lower intercooler pipe and is made from lightweight 2.5\" mandrel bent aluminum tubing. The pipe ends are bead rolled and the assembly is mounted to the core support (in the factory location) to help prevent couplers from popping off under boost. All the factory couplers are replaced with quality 4-ply silicon pieces which can endure 50 + psi of boost! Our LICP is professionally TIG welded in house and is available polished or black wrinkle powder coated. \u003c\/p\u003e \u003ceol\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003ceol\u003e\u003cul\u003e \u003ceol\u003e  \u003cli\u003e Professionally TIG welded \u003c\/li\u003e \u003ceol\u003e  \u003cli\u003e Bead rolled pipe ends \u003c\/li\u003e \u003ceol\u003e  \u003cli\u003e Factory style core support strap \u003c\/li\u003e \u003ceol\u003e  \u003cli\u003e 4 Ply silicon couplers and new hose clamps \u003c\/li\u003e \u003ceol\u003e  \u003cli\u003e 2.5ââ?¬? aluminum mandrel bent piping \u003c\/li\u003e \u003ceol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\n\u003c\/ul\u003e \u003ceol\u003e\u003ch3\u003eApplications\u003c\/h3\u003e \u003ceol\u003e\u003cul\u003e \u003ceol\u003e  \u003cli\u003e Mitsubishi Evolution 10 GSR and MR Models \u003c\/li\u003e \u003ceol\u003e  \u003cli\u003e Fits all USDM, JDM and European Models \u003c\/li\u003e \u003ceol\u003e  \u003cli\u003e Fits all aftermarket intercoolers with factory outlet angle \u003c\/li\u003e \u003ceol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\n\u003c\/ul\u003e \u003ceol\u003e\u003cp\u003e\u003cstrong\u003eNOTE: This pipe is made to work with an AMS intake. It will not work with the stock air box and is not guaranteed to work with any other intake. \u003c\/strong\u003e\u003c\/p\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e","brand":"AMS Performance","offers":[{"title":"Default Title","offer_id":31912447311945,"sku":"AMS AMS.04.09.0003-1","price":388.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Evo-X-AMS-Lower-Intercooler-Pipe-Kit-Polished-AMS-AMS_04_09_0003-1.jpg?v=1744464483"},{"product_id":"werks-racing-lower-ic-hard-pipe-2003-2005-dodge-neon-srt-4-srt4-ichp-l","title":"WERKS Racing Lower IC Hard Pipe | 2003-2005 Dodge Neon SRT-4 (SRT4-ICHP-L)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eNeon SRT-4 Lower Intercooler Hard Pipe by WERKS Racing\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThis is the new WERKSracing lower intercooler hard pipe for the SRT-4. This piece replaces the factory rubber lower intercooler pipe with a lightweight aluminum 2.5\" pipe along with re-inforced silicone couplers. Easy bolt on instalaltion and a must for high boost applications!\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLightweight Aluminum Construction\u003c\/li\u003e\n\u003cli\u003eReplaces Factory Rubber Piping\u003c\/li\u003e\n\u003cli\u003eEasy Bolt-On Installation to SRT-4\u003c\/li\u003e\n\u003cli\u003eIncludes Re-Inforced Silicone Couplers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2003 - 2005 Dodge Neon SRT-4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - Lower Hard Pipe\u003c\/li\u003e\n\u003cli\u003e2 - Silicone Couplers\u003c\/li\u003e\n\u003cli\u003eAll Necessary Hardware (if applicable)\u003c\/li\u003e\n\u003cli\u003eInstructions\/Manuals (if applicable)\u003c\/li\u003e\n\u003cli\u003eWarranty Information\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eWERKS Racing Limited Warranty\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Werks Racing","offers":[{"title":"Default Title","offer_id":31912447606857,"sku":"WER SRT4-ICHP-L","price":128.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/WERKS-Racing-Lower-IC-Hard-Pipe-2003-2005-Dodge-Neon-SRT-4-SRT4-ICHP-L.jpg?v=1744464487"},{"product_id":"prl-intercooler-charge-pipe-upgrade-kit-2017-2020-honda-civic-type-r-prl-hcr-cp","title":"PRL Intercooler Charge Pipe Upgrade Kit | 2017-2020 Honda Civic Type-R (PRL-HCR-CP)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003e2017+ Honda Civic Type-R Intercooler Charge Pipe Upgrade Kit by PRL\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eOur upgraded charge pipe kit utilizes smooth flowing, 26% larger inner diameter cold-side for increased airflow and factory diameter hot-side outlet to aid in turbocharger spool. 4-ply silicone couplers are used throughout the design.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe rubber hoses used from the factory are known to experience expansion, which worsens as boost is increased. In time, the rubber construct weakens, causing increased likeliness of a boost leak. Also, we have managed to melt the factory rubber hose a handful of times during our track adventures on our shop car. Our high-temp, 4-ply silicone will handle the high temperatures of the turbocharger much better than the factory rubber hoses\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCast Aluminum Intercooler Outlet Piece\u003c\/li\u003e\n\u003cli\u003eAluminum Charge Pipe, Powdercoated Wrinkle-Black\u003c\/li\u003e\n\u003cli\u003eVacuum Ports \u0026amp; 1\/8\" NPT Methanol Injection Bung\u003c\/li\u003e\n\u003cli\u003eHigh-Temp, 4-Ply Silicone Couplers\u003c\/li\u003e\n\u003cli\u003e304 Stainless Steel Lined Clamps\u003c\/li\u003e\n\u003cli\u003eIncludes All Hardware Needed for Install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eNo Tune Required\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCompatible With All Factory Location\/Connection Intercoolers - PRL Motorsports Intercooler Upgrade Recommended For Optimal Fitment \u0026amp; Results\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMinor Trimming May Be Required To Radiator\/Fan Shroud If Using Aftermarket Radiator \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2017 - 2020 Honda Civic Type-R\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eImproved Turbo Spool\u003c\/li\u003e\n\u003cli\u003eHeat-Soak Reduction\u003c\/li\u003e\n\u003cli\u003eSmooth Airflow\u003c\/li\u003e\n\u003cli\u003eOptimal Fitment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - Intercooler Outlet Piece\u003c\/li\u003e\n\u003cli\u003e1 - Charge Pipe\u003c\/li\u003e\n\u003cli\u003e1 - Charge Pipe Bracket\u003c\/li\u003e\n\u003cli\u003e2 - M5 x 0.80 x 10mm BHCS Bolt\u003c\/li\u003e\n\u003cli\u003e3 - 4-ply silicone couplers\u003c\/li\u003e\n\u003cli\u003e6 - 304 Stainless Steel Lined clamps\u003c\/li\u003e\n\u003cli\u003eInstallation Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"PRL Motorsports","offers":[{"title":"Default Title","offer_id":31912447803465,"sku":"PRL PRL-HCR-CP","price":474.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/PRL-Intercooler-Charge-Pipe-Upgrade-Kit-2017-2020-Honda-Civic-Type-R-PRL-HCR-CP.jpg?v=1744464499"},{"product_id":"ets-short-route-upper-intercooler-piping-kit-2003-2006-mitsubishi-evo-8-9-100-20-icp","title":"ETS Short Route Upper Intercooler Piping Kit | 2003-2006 Mitsubishi Evo 8\/9 (100-20-ICP)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eMitsubishi Evolution 8\/9 Upper Intercooler Pipes by ETS\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe ETS Evo Piping kit is designed to eliminate many of the unnecessary bends in the stock piping. Our complete piping kit starts off by immediately expanding into 2.5\" right off of the turbo elbow. This replaces the tiny 1 3\/4\" factory pipe and instantly adds an extra 15hp and greatly improves spool. From here it follows the core support and wraps around to the intercooler. Once the air passes through the intercooler, the piping takes a short direct path around the core support, over the transmission and straight up to the throttle body. This unique routing is over two feet shorter than the stock routing which results in greatly improved spool..\u003c\/p\u003e\n\u003cp align=\"justify\"\u003e\u003cstrong\u003eNOTE: Recirculation kit is only needed for Mini Battery route.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for Stock Intake Manifold\u003c\/li\u003e\n\u003cli\u003eComplete Upper Intercooler Piping Kit (Lower Pipe Sold Separately)\u003c\/li\u003e\n\u003cli\u003eStainless Steel Mandrel Bent Piping\u003c\/li\u003e\n\u003cli\u003eShort Route: Two feet shorter than stock\u003c\/li\u003e\n\u003cli\u003eUpper Piping flows over 12% more\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2003 - 2006 Mitsubishi Evolution 8\/9\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 - ETS Upper IC Pipes\u003c\/li\u003e\n\u003cli\u003e2 - Silicone Couplers\u003c\/li\u003e\n\u003cli\u003e4 - Clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"ETS","offers":[{"title":"2.75\" \/ Speed Density \/ Stock BOV with Recirculation Coupler","offer_id":31912448000073,"sku":"ETS 100-20-ICP-095","price":581.96,"currency_code":"USD","in_stock":true},{"title":"2.75\" \/ Speed Density \/ TiAL BOV with Recirculation Coupler","offer_id":31912448065609,"sku":"ETS 100-20-ICP-204","price":637.96,"currency_code":"USD","in_stock":true},{"title":"2.75\" \/ Speed Density \/ HKS BOV with Recirculation Coupler","offer_id":31912448098377,"sku":"ETS 100-20-ICP-205","price":637.96,"currency_code":"USD","in_stock":true},{"title":"2.75\" \/ Speed Density \/ Stock BOV without Recirculation Coupler","offer_id":31912448131145,"sku":"ETS 100-20-ICP-096","price":552.96,"currency_code":"USD","in_stock":true},{"title":"2.75\" \/ Speed Density \/ TiAL BOV without Recirculation Coupler","offer_id":31912448163913,"sku":"ETS 100-20-ICP-097","price":608.96,"currency_code":"USD","in_stock":true},{"title":"2.75\" \/ Speed Density \/ HKS BOV without Recirculation Coupler","offer_id":31912448196681,"sku":"ETS 100-20-ICP-098","price":608.96,"currency_code":"USD","in_stock":true},{"title":"3.00\" \/ Speed Density \/ Stock BOV with Recirculation Coupler","offer_id":31912448229449,"sku":"ETS 100-20-ICP-102","price":581.96,"currency_code":"USD","in_stock":true},{"title":"3.00\" \/ Speed Density \/ TiAL BOV with Recirculation Coupler","offer_id":31912448262217,"sku":"ETS 100-20-ICP-207","price":637.96,"currency_code":"USD","in_stock":true},{"title":"3.00\" \/ Speed Density \/ HKS BOV with Recirculation Coupler","offer_id":31912448294985,"sku":"ETS 100-20-ICP-208","price":637.96,"currency_code":"USD","in_stock":true},{"title":"3.00\" \/ Speed Density \/ Stock BOV without Recirculation Coupler","offer_id":31912448327753,"sku":"ETS 100-20-ICP-103","price":552.96,"currency_code":"USD","in_stock":true},{"title":"3.00\" \/ Speed Density \/ TiAL BOV without Recirculation Coupler","offer_id":31912448360521,"sku":"ETS 100-20-ICP-104","price":608.96,"currency_code":"USD","in_stock":true},{"title":"3.00\" \/ Speed Density \/ HKS BOV without Recirculation Coupler","offer_id":31912448393289,"sku":"ETS 100-20-ICP-105","price":608.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/ETS-Short-Route-Upper-Intercooler-Piping-Kit-2003-2006-Mitsubishi-Evo-89-100-20-ICP.jpg?v=1744464525"},{"product_id":"ams-lower-intercooler-cold-pipe-wrinkle-black-ams-04-09-0003-2","title":"AMS Lower Intercooler Cold Pipe Wrinkle Black (AMS.04.09.0003-2)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eAMS Mitsubishi Lancer Evolution X Lower Intercooler Pipe \/ Cold Pipe *Black*\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe AMS EVO X Lower Intercooler Pipe (LICP) is a direct replacement for your factory lower intercooler pipe and is made from lightweight 2.5\" mandrel bent aluminum tubing. The pipe ends are bead rolled and the assembly is mounted to the core support (in the factory location) to help prevent couplers from popping off under boost. All the factory couplers are replaced with quality 4-ply silicon pieces which can endure 50 + psi of boost! Our LICP is professionally TIG welded in house and is available polished or black wrinkle powder coated.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: This pipe is made to work with an AMS intake. It will not work with the stock air box and is not guaranteed to work with any other intake. \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfessionally TIG welded\u003c\/li\u003e\n\u003cli\u003eBead rolled pipe ends\u003c\/li\u003e\n\u003cli\u003eFactory style core support strap\u003c\/li\u003e\n\u003cli\u003e4 Ply silicon couplers and new hose clamps\u003c\/li\u003e\n\u003cli\u003e2.5 aluminum mandrel bent piping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2008-2015 Mitsubishi Evo X GSR and MR Models\u003c\/li\u003e\n\u003cli\u003eFits all USDM, JDM and European Models\u003c\/li\u003e\n\u003cli\u003eFits all aftermarket intercoolers with factory outlet angle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Pipes\u003c\/li\u003e\n\u003cli\u003e(4) Silicone Hoses with Clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"AMS Performance","offers":[{"title":"Default Title","offer_id":31912448426057,"sku":"AMS AMS.04.09.0003-2","price":465.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/AMS-Lower-Intercooler-Cold-Pipe-Wrinkle-Black-AMS_04_09_0003-2.jpg?v=1744464528"},{"product_id":"tomei-titanium-upper-intercooler-pipe-2008-2015-mitsubishi-evo-x-451001","title":"Tomei Titanium Upper Intercooler Pipe | 2008-2015 Mitsubishi Evo X (451001)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003e4B11\/CZ4A TITANIUM AIR INTAKE PIPE\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe stock rubber hose is not suitable for high temperatures and boost pressures that the engine is capable of when pushed for performance. The piping will deform and hinder the air flow to the engines intake. With this TOMEI Titanium intake pipe, the deformation problem is eliminated whilst preventing the loss of boost pressure. With the added benefits of a 25% weight reduction over the stock item with the increased performance gains, makes it an easier point to choose this easy simple upgrade.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTitanium construction\u003c\/li\u003e\n\u003cli\u003e60.5mm diameter\u003c\/li\u003e\n\u003cli\u003e1mm thick\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLighter and more durable than the stock pipe\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2008-2015 Mitsubishi Evo X\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Intake Pipe\u003c\/li\u003e\n\u003cli\u003e(2) Silicone Couplers\u003c\/li\u003e\n\u003cli\u003e(4) Clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTomei Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Tomei","offers":[{"title":"Default Title","offer_id":31912448655433,"sku":"TOM TB302A-MT02A","price":418.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Tomei-Titanium-Upper-Intercooler-Pipe-2008-2015-Mitsubishi-Evo-X-451001.jpg?v=1744464533"},{"product_id":"ets-lower-intercooler-pipe-kit-2008-2015-mitsubishi-evo-x-ets_evox_licp","title":"ETS Lower Intercooler Pipe Kit | 2008-2015 Mitsubishi Evo X (ETS_EVOX_LICP)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eMitsubishi Evo X Lower Intercooler Pipe Kit by ETS\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe ETS Mitsubishi Evo X Lower Piping Kit removes the factory rubber hoses which are prone to ballooning and popping off under higher boost pressure.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eFrom the intercooler outlet the 2.5\" mandrel bent piping continues around the core support, with only two gradual radius bends in its entire length, to the lower intercooler pipe bracket before making a straight shot to the throttle body. ETS 4-ply silicone and 100% SS T-bolt clamps are included for every connection to ensure that blown off intercooler piping stays a thing of the past.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2.50\" Mandrel Bent Piping.\u003c\/li\u003e\n\u003cli\u003eLower Intercooler Pipe Bracket\u003c\/li\u003e\n\u003cli\u003e4-ply Silicone.\u003c\/li\u003e\n\u003cli\u003eT-Bolt Clamps.\u003c\/li\u003e\n\u003cli\u003eIncludes all mounting hardware.\u003c\/li\u003e\n\u003cli\u003eDoes not block the oil cooler ducting like some of the competitor pipes.\u003c\/li\u003e\n\u003cli\u003eWorks with GSR and MR transmission as well as the stock airbox and blow off valve. (Direct replacement of factory unit)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note: California Residents - Prop 65 Warning.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2008 - 2015 Mitsubishi Evolution X\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - ETS Lower IC Pipe Set\u003c\/li\u003e\n\u003cli\u003eCouplers and Clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"ETS","offers":[{"title":"Wrinkle Black","offer_id":31912449212489,"sku":"ETS 100-10-ICP-007","price":552.96,"currency_code":"USD","in_stock":true},{"title":"Titanium w\/ No Burn","offer_id":31912449245257,"sku":"ETS 100-10-ICP-008","price":952.96,"currency_code":"USD","in_stock":true},{"title":"Titanium w\/ Spot Anodizing","offer_id":31912449278025,"sku":"ETS 100-10-ICP-009","price":952.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/ETS-Lower-Intercooler-Pipe-Kit-2008-2015-Mitsubishi-Evo-X-ETS_EVOX_LICP.jpg?v=1744464542"},{"product_id":"map-complete-intercooler-piping-kit-2008-2015-mitsubishi-evolution-x","title":"MAP Complete Intercooler Piping Kit | 2008-2015 Mitsubishi Evolution X","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eEvo X Complete Intercooler Piping Kit\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe MAP Mitsubishi Evo X Front Upper Intercooler Pipe works with the MAP Rear Intercooler pipe to eliminate the factory aluminum pipe to increase power and reliability. It is mandrel bent and uses high quality 304 stainless steel to not only dress up your engine bay, but get that extra kick in horsepower!\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe MAPerformance Mitsubishi Evo X Upper Rear Intercooler Pipe works by replacing the factory pipe that necks down to 1.75\" at the turbo outlet with a full 2.5\" pipe to increase power and reliability. It is mandrel bent and uses high quality 304 stainless steel to not only dress up your engine bay, but get that extra kick in horsepower!\u003c\/p\u003e\n\u003cp align=\"justify\"\u003e\u003cspan\u003eThe MAP EVO X Lower Intercooler Pipe is a significant upgrade over the factory GSR or MR (USDM and JDM) intercooler pipe. It is designed to be a one piece unit to avoid having to use excess couplers, and to have the smoothest transition from the intercooler to the throttle body. It also incorporates a bracket to hold the lower radiator hose just like the factory pipe. It requires no modification for install and can be completed in under 2 hours.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSmooth Mandrel Bends\u003c\/li\u003e\n\u003cli\u003e304 Stainless Steel Construction\u003c\/li\u003e\n\u003cli\u003e4-Ply Silicone Couplers\u003c\/li\u003e\n\u003cli\u003eT-Bolt Clamps\u003c\/li\u003e\n\u003cli\u003eWill work with factory airbox\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2008 - 2015 Mitsubishi Evolution X\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - MAP Front Upper Intercooler Pipe\u003c\/li\u003e\n\u003cli\u003e1 - MAP Rear Upper Intercooler Pipe\u003c\/li\u003e\n\u003cli\u003e1 - MAP Lower Intercooler Pipe\u003c\/li\u003e\n\u003cli\u003eSilicone Couplers\u003c\/li\u003e\n\u003cli\u003eAll Mounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Instructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/files\/EVOX-FUICP.pdf?5340760892807971386\" target=\"“_blank”\" rel=\"“\" noreferrer=\"\"\u003eDownload Install Instructions Here\u003c\/a\u003e!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli id=\"warranty\"\u003eMAP Limited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"MAPerformance Fabrication","offers":[{"title":"Polished","offer_id":31912449310793,"sku":"MAP EVOX-ICP-KIT","price":659.96,"currency_code":"USD","in_stock":true},{"title":"Wrinkle Black","offer_id":31912449343561,"sku":"MAP EVOX-ICP-KIT-WB","price":860.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/MAP-Complete-Intercooler-Piping-Kit-2008-2015-Mitsubishi-Evolution-X.jpg?v=1744464544"},{"product_id":"map-charge-piping-kit-2015-2020-subaru-wrx-wrx-4g-cpk","title":"MAP Charge Piping Kit | 2015-2020 Subaru WRX (WRX-4G-CPK)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003e2015+ WRX Charge Piping Upgrade Kit\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eBy default, manufacturers opt for plastic charge piping because it's cheap to mass produce. But dont complain, thats one reason why the \u003cstrong\u003e2015 and up Subaru Impreza WRX\u003c\/strong\u003e is so affordable. With that, MAPerformance is happy too - because we're able to bring you an awesome upgrade for a quarter of the cost of what the manufacturer would tack on for steel or aluminum piping! Introducing the \u003cstrong\u003e2015-2020 Subaru WRX Charge Piping Upgrade\u003c\/strong\u003e!\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eUsing the finest stainless steel available and advanced mandrel bending practices, we're able to manufacture high quality stainless steel \u003cstrong\u003e2015+ WRX intercooler piping\u003c\/strong\u003e, all at an affordable low cost to you! Why stainless steel? Sure, it may weigh a little more than traditional aluminum upgrades, but it's heat resistance properties are far superior, and this is especially important when tucked \u003cem\u003eunder the hood of your 2015-2020 Subaru WRX\u003c\/em\u003e.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStainless Steel tubing for decreased heat soak\u003c\/li\u003e\n\u003cli\u003eMandrel Bent Tubing for optimal air flow and less joint welds\u003c\/li\u003e\n\u003cli\u003eBack Purge TIG welded for strength and durability\u003c\/li\u003e\n\u003cli\u003eSelective routing reduces the need for couplers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp align=\"justify\"\u003e\u003cstrong\u003ePlease Note: There is currently a 2-3 week wait period for this item\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2015-2020 Subaru Impreza WRX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReferences\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/files\/WRX-IC_CPK.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eInstallation Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli id=\"warranty\"\u003eMAP Limited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"MAPerformance Fabrication","offers":[{"title":"Default Title","offer_id":31912449736777,"sku":"MAP WRX-4G-CPK","price":504.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/MAP-Charge-Piping-Kit-2015-2020-Subaru-WRX-WRX-4G-CPK.jpg?v=1744464589"},{"product_id":"agp-upper-hard-pipe-2003-2005-dodge-neon-srt-4-agp-srt-uhp","title":"AGP Upper Hard Pipe | 2003-2005 Dodge Neon SRT-4 (AGP-SRT-UHP)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eNeon SRT-4 Upper Hard Pipe\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eIt is time that you finally have the ability to upgrade your stock upper pressure intercooler hose to a piece that: 1. Fits and 2. Does not blow that damn temperature sensor out and leaves you with a huge boost leak. Introducing the AGP Upper Hard Pipe (UHP).\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThis kit completely replaces the stock stock restrictive rubber hose with a new 2.5\" custom mandrel bent high polished aluminum, 4 ply silicone hose connectors, all hose necessary hose clamps, and one final key ingredient: a new temperature sensor that threads into the UHP. Using this threaded sensor, you will no longer have the problem of pressure leaks around the stock grommet, and it won't blow out under high boost applications.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eTo this date, this remains the only hard pipe setup that fits perfectly and does not leak boost. You have the ability to purchase this kit with all the different BOV flanges on the market. You can also choose no BOV flange for those wanting to keep the stock integrated surge valve.If you're still running the factory turbo, and you need a block off plate.The UHP comes with the threaded temp sensor. The UHP with a BOV mount will not fit the stock airbox or the AEM SRI.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2003-2005 Dodge Neon SRT-4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 UHP\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMFGR. Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"AGP Turbo","offers":[{"title":"None \/ No Thanks","offer_id":31912449933385,"sku":"AGP AGP-SRT-UHP","price":279.96,"currency_code":"USD","in_stock":true},{"title":"None \/ Yes Please","offer_id":31912449966153,"sku":"AGP AGP-SRT-UHP_BOP","price":293.96,"currency_code":"USD","in_stock":true},{"title":"Turbo XS \/ No Thanks","offer_id":31912449998921,"sku":"AGP AGP-SRT-UHP_TXS","price":320.96,"currency_code":"USD","in_stock":true},{"title":"Turbo XS \/ Yes Please","offer_id":31912450031689,"sku":"AGP AGP-SRT-UHP_TXS_BOP","price":333.96,"currency_code":"USD","in_stock":true},{"title":"Greddy\/Raptor \/ No Thanks","offer_id":31912450064457,"sku":"AGP AGP-SRT-UHP_G\/R","price":320.96,"currency_code":"USD","in_stock":true},{"title":"Greddy\/Raptor \/ Yes Please","offer_id":31912450097225,"sku":"AGP AGP-SRT-UHP_G\/R_BOP","price":333.96,"currency_code":"USD","in_stock":true},{"title":"HKS \/ No Thanks","offer_id":31912450129993,"sku":"AGP AGP-SRT-UHP_HKS","price":352.96,"currency_code":"USD","in_stock":true},{"title":"HKS \/ Yes Please","offer_id":31912450162761,"sku":"AGP AGP-SRT-UHP_HKS_BOP","price":364.96,"currency_code":"USD","in_stock":true},{"title":"TiAL \/ No Thanks","offer_id":31912450195529,"sku":"AGP AGP-SRT-UHP_TiAL","price":352.96,"currency_code":"USD","in_stock":true},{"title":"TiAL \/ Yes Please","offer_id":31912450228297,"sku":"AGP AGP-SRT-UHP_TiAL_BOP","price":364.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/AGP-Upper-Hard-Pipe-2003-2005-Dodge-Neon-SRT-4-AGP-SRT-UHP.jpg?v=1744464612"},{"product_id":"grimmspeed-tmic-aluminum-y-pipe-kit-02-07-subaru-wrx-04-20-sti-090095-6","title":"GrimmSpeed TMIC Aluminum Y-Pipe Kit | 02-07 Subaru WRX \/ 04-20 STi (090095\/6)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003e02-07 WRX \/ 04-20 STi TMIC Y-Pipe Kit by Grimmspeed\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eJust bought an aftermarket or STI TMIC that requires an STI y-pipe to fit? Want to replace your chewed up and leaking couplers? Maybe you're just looking to freshen up your engine bay with a touch of GrimmSpeed style. Well, there's something for everybody with the GrimmSpeed Y-Pipe Kit.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe GrimmSpeed TMIC y-pipe has been completely redesigned to make use of a single-piece aluminum casting that's machined after the casting process to ensure perfectly flat flanges and precise fitment every single time. With inspiration from the OEM y-pipe, GrimmSpeed engineers set out to balance the airflow through the y-pipe to evenly distribute charge air across the inlet end tank on your Top Mount Intercooler.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe 5-ply silicone couplers are fiber reinforced to prevent distortion in high boost scenarios but offer mobility and flexibility, isolating your TMIC assembly from the vibrations of your engine. Each 90 degree coupler is slightly oversized on the turbo side so that it can be trimmed-to-fit with a number of different stock location turbos. This y-pipe is exactly what you need in order to upgrade your WRX TMIC to an STI or GrimmSpeed TMIC. If you've got an STI, the GrimmSpeed y-pipe offers a fresh look and better flow distribution. All kits come with replacement 90deg turbo outlet couplers and throttle body couplers.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne-Piece Aluminum Casting\u003c\/strong\u003e - Precise fit and smooth flow without distortion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThick Flanges\u003c\/strong\u003e - Prevent heat and vibration from cracking casting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachined Flanges\u003c\/strong\u003e - Ensures a perfect fit, leak-free seal, every time\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5-Ply High-Grade Silicone Couplers\u003c\/strong\u003e - Smooth interior to maximize airflow and minimize restriction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeat Resistant Reinforcement\u003c\/strong\u003e - Couplers keep their shape, even at high boost levels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless Steel High-Torque Clamps\u003c\/strong\u003e - Rust-proof construction with smooth operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack Zinc Coated Hardware\u003c\/strong\u003e - Ditch those nasty OEM fasteners\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecial Fitment Note: Supported fitments include only those vehicles running OEM STI and GrimmSpeed top mount intercoolers. The elbow coupler is sized to fit multiple turbo setups, some trimming may be required.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2004 - 2020 Subaru STI\u003c\/li\u003e\n\u003cli\u003e2002 - 2007 Subaru WRX*\u003c\/li\u003e\n\u003cli\u003e*See Special Fitment Note*\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - Y-Pipe\u003c\/li\u003e\n\u003cli\u003e2 - Couplers\u003c\/li\u003e\n\u003cli\u003e4 - Clamps\u003c\/li\u003e\n\u003cli\u003eNecessary Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"GrimmSpeed","offers":[{"title":"Red Couplers","offer_id":31912450359369,"sku":"GRI 090095","price":247.96,"currency_code":"USD","in_stock":true},{"title":"Black Couplers","offer_id":31912450392137,"sku":"GRI 090096","price":247.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/GrimmSpeed-TMIC-Aluminum-Y-Pipe-Kit-02-07-Subaru-WRX-04-20-STi-0900956.jpg?v=1744464614"},{"product_id":"aem-intercooler-charge-pipe-kit-2015-2020-subaru-wrx-26-3000c","title":"AEM Intercooler Charge Pipe Kit | 2015-2020 Subaru WRX (26-3000C)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eIntercooler Charge Pipe Kit by AEM\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe AEM 26-3000C Intercooler Charge Pipe Kit is a free-flowing, mandrel-bent aluminum tube designed to replace the restrictive factory intercooler piping on specific turbo charged Subaru WRX models. The AEM charge pipe has been engineered to reduce turbo charged air pressure loss as well as dramatically increase air flow from the turbo to the intercooler. The specialized aerodynamic tube design produces a noticeable horsepower and acceleration gain from your engine. The tube also features a fitting that can accommodate the factory or any other after-market diverter valve or blow-off valve. This allows you to choose the type of valve that will give you the specific boost performance, blow-off acoustics and under-the-hood style to fit your needs. The AEM intercooler piping is constructed from lightweight aluminum with a durable gunmetal gray powder coated finish. For additional horsepower gains and improved engine compartment aesthetics, the AEM 21-732C Cold Air Intake System can be installed into your vehicle as well. The charge pipe kit is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM charge pipe kits are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncreases horsepower and acceleration\u003c\/li\u003e\n\u003cli\u003eAllows for the use of after-market bypass or blow-off valves\u003c\/li\u003e\n\u003cli\u003eLow restriction aluminum tubing\u003c\/li\u003e\n\u003cli\u003eEasy to install using commonly available tools\u003c\/li\u003e\n\u003cli\u003eAEM Lifetime Limited Warranty\u003c\/li\u003e\n\u003cli\u003eEstimated Horsepower Gain: 13 HP @ 3800 RPM\u003c\/li\u003e\n\u003cli\u003eCalifornia Restricted: Not legal for sale or use in California\u003c\/li\u003e\n\u003cli\u003eColor Gunmetal: Gray\u003c\/li\u003e\n\u003cli\u003eMaterial Used: Aluminum\u003c\/li\u003e\n\u003cli\u003ePackage Contents: 1 Intercooler Pipe\u003c\/li\u003e\n\u003cli\u003eProduct Box Height: 10.75 in (273 mm)\u003c\/li\u003e\n\u003cli\u003eProduct Box Length: 22.38 in (568 mm)\u003c\/li\u003e\n\u003cli\u003eProduct Box Width: 22.38 in (568 mm)\u003c\/li\u003e\n\u003cli\u003eProduct Style: AEM Intercooler Pipe\u003c\/li\u003e\n\u003cli\u003eStreet Legal In All US States: No\u003c\/li\u003e\n\u003cli\u003eTUV Approved (Europe): No\u003c\/li\u003e\n\u003cli\u003eWeight: 6.7 lb (3 kg)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2015 - 2020 Subaru WRX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIntercooler Charge Pipe Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Instructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.aemintakes.com\/instructions\/AEM-26-3000_inst.pdf\"\u003eClick Here for Installation Instructions\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"AEM Induction Systems","offers":[{"title":"Default Title","offer_id":31912450424905,"sku":"AEM 26-3000C","price":320.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/AEM-Intercooler-Charge-Pipe-Kit-2015-2020-Subaru-WRX-26-3000C.jpg?v=1744464620"},{"product_id":"ultimate-racing-hot-and-cold-hard-pipe-package-2003-2005-dodge-neon-srt-4-500041","title":"Ultimate Racing Hot and Cold Hard Pipe Package | 2003-2005 Dodge Neon SRT-4 (500041)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eNeon SRT-4 Hot\/Cold Hard Pipe Package by Ultimate Racing\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eHard pipe replacement for the factory intercooler piping. Hard piping offers better flow and increased durability\/service life compared to the stock piping. Flanged for either HKS or TiAL blow off valves. Optional HKS or TiAL BOV Kit included upon request. Silicone couplers are available in either black or blue.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect replacement\u003c\/li\u003e\n\u003cli\u003eBead Rolled with 3-ply silicone hose\u003c\/li\u003e\n\u003cli\u003eReplaces both pipes to and from intercooler (Hot and Cold)\u003c\/li\u003e\n\u003cli\u003eFlanged for either HKS or TiAL BOVs\u003c\/li\u003e\n\u003cli\u003eOptional complete kit with BOV of choice supplied\u003c\/li\u003e\n\u003cli\u003eChoice of Blue or Black Silicone Couplers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2003 - 2005 Dodge Neon SRT-4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - Hot Pipe\u003c\/li\u003e\n\u003cli\u003e1 - Cold Pipe\u003c\/li\u003e\n\u003cli\u003eCouplers and Clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUltimate Racing Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Ultimate Racing","offers":[{"title":"HKS Flange \/ Black Couplers \/ No BOV","offer_id":31912450490441,"sku":"ULT 500041\/HKS_BK","price":439.96,"currency_code":"USD","in_stock":true},{"title":"HKS Flange \/ Black Couplers \/ HKS BOV (+$285)","offer_id":31912450523209,"sku":"ULT 500041\/HKS_BK+HKSBOV","price":895.96,"currency_code":"USD","in_stock":true},{"title":"HKS Flange \/ Black Couplers \/ TiAL BOV (+$270)","offer_id":31912450555977,"sku":"ULT 500041\/HKS_BK+TiALBOV","price":873.96,"currency_code":"USD","in_stock":true},{"title":"HKS Flange \/ Blue Couplers \/ No BOV","offer_id":31912450588745,"sku":"ULT 500041\/HKS_BL","price":439.96,"currency_code":"USD","in_stock":true},{"title":"HKS Flange \/ Blue Couplers \/ HKS BOV (+$285)","offer_id":31912450621513,"sku":"ULT 500041\/HKS_BL+HKSBOV","price":895.96,"currency_code":"USD","in_stock":true},{"title":"HKS Flange \/ Blue Couplers \/ TiAL BOV (+$270)","offer_id":31912450654281,"sku":"ULT 500041\/HKS_BL+TiALBOV","price":873.96,"currency_code":"USD","in_stock":true},{"title":"TiAL Flange \/ Black Couplers \/ No BOV","offer_id":31912450687049,"sku":"ULT 500041\/TiAL_BK","price":439.96,"currency_code":"USD","in_stock":true},{"title":"TiAL Flange \/ Black Couplers \/ HKS BOV (+$285)","offer_id":31912450719817,"sku":"ULT 500041\/TiAL_BK+HKSBOV","price":895.96,"currency_code":"USD","in_stock":true},{"title":"TiAL Flange \/ Black Couplers \/ TiAL BOV (+$270)","offer_id":31912450752585,"sku":"ULT 500041\/TiAL_BK+TiALBOV","price":873.96,"currency_code":"USD","in_stock":true},{"title":"TiAL Flange \/ Blue Couplers \/ No BOV","offer_id":31912450785353,"sku":"ULT 500041\/TiAL_BL","price":439.96,"currency_code":"USD","in_stock":true},{"title":"TiAL Flange \/ Blue Couplers \/ HKS BOV (+$285)","offer_id":31912450818121,"sku":"ULT 500041\/TiAL_BL+HKSBOV","price":895.96,"currency_code":"USD","in_stock":true},{"title":"TiAL Flange \/ Blue Couplers \/ TiAL BOV (+$270)","offer_id":31912450850889,"sku":"ULT 500041\/TiAL_BL+TiALBOV","price":873.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Ultimate-Racing-Hot-and-Cold-Hard-Pipe-Package-2003-2005-Dodge-Neon-SRT-4-500041.jpg?v=1744464625"},{"product_id":"ets-front-mount-intercooler-piping-kit-2015-2019-subaru-wrx-200-40-icp","title":"ETS Front Mount Intercooler Piping Kit | 2015-2019 Subaru WRX (200-40-ICP)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eETS 2015+ SUBARU WRX FRONT MOUNT INTERCOOLER PIPING KIT\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe ETS intercooler piping kit uses 2.5\" OD 304 Stainless Steel tubing. The piping is 1 piece mandrel bent with no welds or joints to disrupt flow. The ends of the pipes are beaded so you won't have to worry about couplers coming off during a pull. We finish our pipes in a wrinkle black powder coat. We guarantee the best possible fitment which will save you precious time during install.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2.5\" Mandrel Bent SS \u003c\/li\u003e\n\u003cli\u003ePowder Coated Wrinkle Black\u003c\/li\u003e\n\u003cli\u003eIndustry Leading Fitment\u003c\/li\u003e\n\u003cli\u003eETS Black Silicone Couplers\u003c\/li\u003e\n\u003cli\u003eSS T-Bolt Clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2015 - 2019 Subaru WRX\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIntercooler Piping\u003c\/li\u003e\n\u003cli\u003eCouplers\u003c\/li\u003e\n\u003cli\u003eClamps\u003c\/li\u003e\n\u003cli\u003eInstallation Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"ETS","offers":[{"title":"Stock BOV \/ Wrinkle Black Stainless \/ Stock Manifold","offer_id":31912452948041,"sku":"ETS 200-40-ICP-001","price":1272.96,"currency_code":"USD","in_stock":true},{"title":"Stock BOV \/ Wrinkle Black Hot Side \/ Titanium Burned Cold Side \/ Stock Manifold","offer_id":31912453013577,"sku":"ETS 200-40-ICP-004","price":1752.96,"currency_code":"USD","in_stock":true},{"title":"Stock BOV \/ Wrinkle Black Hot Side \/ Titanium Brushed Cold Side \/ Stock Manifold","offer_id":31912453079113,"sku":"ETS 200-40-ICP-007","price":1752.96,"currency_code":"USD","in_stock":true},{"title":"Stock BOV \/ Wrinkle Black Stainless \/ iBR BRZ Manifold","offer_id":31912453111881,"sku":"ETS 200-40-ICP-015","price":1272.96,"currency_code":"USD","in_stock":true},{"title":"Stock BOV \/ Wrinkle Black Hot Side \/ Titanium Burned Cold Side \/ iBR BRZ Manifold","offer_id":31912453177417,"sku":"ETS 200-40-ICP-018","price":1752.96,"currency_code":"USD","in_stock":true},{"title":"Stock BOV \/ Wrinkle Black Hot Side \/ Titanium Brushed Cold Side \/ iBR BRZ Manifold","offer_id":31912453242953,"sku":"ETS 200-40-ICP-021","price":1752.96,"currency_code":"USD","in_stock":true},{"title":"TiAL BOV \/ Wrinkle Black Stainless \/ Stock Manifold","offer_id":31912453308489,"sku":"ETS 200-40-ICP-002","price":1329.96,"currency_code":"USD","in_stock":true},{"title":"TiAL BOV \/ Wrinkle Black Hot Side \/ Titanium Burned Cold Side \/ Stock Manifold","offer_id":31912453341257,"sku":"ETS 200-40-ICP-005","price":1809.96,"currency_code":"USD","in_stock":true},{"title":"TiAL BOV \/ Wrinkle Black Hot Side \/ Titanium Brushed Cold Side \/ Stock Manifold","offer_id":31912453406793,"sku":"ETS 200-40-ICP-008","price":1809.96,"currency_code":"USD","in_stock":true},{"title":"TiAL BOV \/ Wrinkle Black Stainless \/ iBR BRZ Manifold","offer_id":31912453472329,"sku":"ETS 200-40-ICP-016","price":1329.96,"currency_code":"USD","in_stock":true},{"title":"TiAL BOV \/ Wrinkle Black Hot Side \/ Titanium Burned Cold Side \/ iBR BRZ Manifold","offer_id":31912453505097,"sku":"ETS 200-40-ICP-019","price":1809.96,"currency_code":"USD","in_stock":true},{"title":"TiAL BOV \/ Wrinkle Black Hot Side \/ Titanium Brushed Cold Side \/ iBR BRZ Manifold","offer_id":31912453570633,"sku":"ETS 200-40-ICP-022","price":1809.96,"currency_code":"USD","in_stock":true},{"title":"HKS BOV \/ Wrinkle Black Stainless \/ Stock Manifold","offer_id":31912453636169,"sku":"ETS 200-40-ICP-003","price":1329.96,"currency_code":"USD","in_stock":true},{"title":"HKS BOV \/ Wrinkle Black Hot Side \/ Titanium Burned Cold Side \/ Stock Manifold","offer_id":31912453701705,"sku":"ETS 200-40-ICP-006","price":1809.96,"currency_code":"USD","in_stock":true},{"title":"HKS BOV \/ Wrinkle Black Hot Side \/ Titanium Brushed Cold Side \/ Stock Manifold","offer_id":31912453767241,"sku":"ETS 200-40-ICP-009","price":1809.96,"currency_code":"USD","in_stock":true},{"title":"HKS BOV \/ Wrinkle Black Stainless \/ iBR BRZ Manifold","offer_id":31912453800009,"sku":"ETS 200-40-ICP-017","price":1329.96,"currency_code":"USD","in_stock":true},{"title":"HKS BOV \/ Wrinkle Black Hot Side \/ Titanium Burned Cold Side \/ iBR BRZ Manifold","offer_id":31912453865545,"sku":"ETS 200-40-ICP-020","price":1809.96,"currency_code":"USD","in_stock":true},{"title":"HKS BOV \/ Wrinkle Black Hot Side \/ Titanium Brushed Cold Side \/ iBR BRZ Manifold","offer_id":31912453931081,"sku":"ETS 200-40-ICP-023","price":1809.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/ETS-Front-Mount-Intercooler-Piping-Kit-2015-2019-Subaru-WRX-200-40-ICP.jpg?v=1744464633"},{"product_id":"stm-2-5in-aluminum-upper-intercooler-pipe-kit-brushed-aluminum-2001-2006-mitsubishi-lancer-evo-stm-evo79-uicp-al-br","title":"STM 2.5in Aluminum Upper Intercooler Pipe Kit - Brushed Aluminum | 2001-2006 Mitsubishi Lancer Evo (STM-EVO79-UICP-AL-BR)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eBrushed Aluminum Upper Intercooler Pipe Kit by STM\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe STM 2.5\" Upper Intercooler Pipe Kit for the Evolution VII-VIII-IX features smooth, mandrel bent, lightweight 2.5\" aluminum piping with bead-rolled ends with your choice of blow off valve flange and the option for an AIT bung. Includes 6 stainless T-Bolt clamps and 3 high-quality black, silicone couplers.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThis kit is designed to work with any manifold that utilizes the factory throttle body location, including OEM, Skunk2, Driven Innovations, AMS F1 and so on. The throttle body coupler is a 2.5\" - 2.75.\" These pipes will not clear a factory-sized battery. The STM Small Battery Kit is required for install. These pipes have been test-fitted and are compatible with the STM, OEM and Buschur intercoolers, and they will also work with any aftermarket intercooler utilizing the stock-placement of piping such as ETS.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLightweight 2.5\" Aluminum Piping\u003c\/li\u003e\n\u003cli\u003eSmooth Mandrel Bends\u003c\/li\u003e\n\u003cli\u003eBead-Rolled Pipe Ends\u003c\/li\u003e\n\u003cli\u003eHigh-Quality Couplers\u003c\/li\u003e\n\u003cli\u003eStainless T-Bolt Clamps\u003c\/li\u003e\n\u003cli\u003eBrushed Aluminum Finish\u003c\/li\u003e\n\u003cli\u003eChoice of Blow Off Valve Flange\u003c\/li\u003e\n\u003cli\u003eAdd AIT Bung (Optional)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThese pipes will not clear a factory-sized battery. The STM Small Battery Kit is required for install.\u003c\/li\u003e\n\u003cli\u003eThese pipes are aluminum and if you OVER-tighten the T-Clamps there is a chance of crimping the pipe.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2001 - 2003 Mitsubishi Lancer Evolution VII\u003c\/li\u003e\n\u003cli\u003e2003 - 2005 Mitsubishi Lancer Evolution VIII\u003c\/li\u003e\n\u003cli\u003e2005 - 2006 Mitsubishi Lancer Evolution IX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 - STM 2.5in Aluminum Pipes\u003c\/li\u003e\n\u003cli\u003e1 - 2.5inx4in Straight Black Silicone Coupler\u003c\/li\u003e\n\u003cli\u003e1 - 2.5in Himp Black Silicone Coupler\u003c\/li\u003e\n\u003cli\u003e1 - 2.5in-2.75in Reducer Silicone Coupler\u003c\/li\u003e\n\u003cli\u003e5 - 2.5in Stainless Steel T-Bolt Clamps\u003c\/li\u003e\n\u003cli\u003e1 - 2.75in Stainless Steel T-Bolt Clamp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSTM Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"STM","offers":[{"title":"Stock \/ No AIT Bung","offer_id":31912455372873,"sku":"STM STM-EVO79-UICP-AL-BR-STK","price":439.96,"currency_code":"USD","in_stock":true},{"title":"Stock \/ AIT Bung Included","offer_id":31912455405641,"sku":"STM STM-EVO79-UICP-AL-BR-STK-AIT","price":472.96,"currency_code":"USD","in_stock":true},{"title":"TiAL \/ No AIT Bung","offer_id":31912455438409,"sku":"STM STM-EVO79-UICP-AL-BR-TIA","price":439.96,"currency_code":"USD","in_stock":true},{"title":"TiAL \/ AIT Bung Included","offer_id":31912455471177,"sku":"STM STM-EVO79-UICP-AL-BR-TIA-AIT","price":472.96,"currency_code":"USD","in_stock":true},{"title":"Greddy \/ No AIT Bung","offer_id":31912455503945,"sku":"STM STM-EVO79-UICP-AL-BR-GRE","price":439.96,"currency_code":"USD","in_stock":true},{"title":"Greddy \/ AIT Bung Included","offer_id":31912455536713,"sku":"STM STM-EVO79-UICP-AL-BR-GRE-AIT","price":472.96,"currency_code":"USD","in_stock":true},{"title":"HKS \/ No AIT Bung","offer_id":31912455569481,"sku":"STM STM-EVO79-UICP-AL-BR-HKS","price":439.96,"currency_code":"USD","in_stock":true},{"title":"HKS \/ AIT Bung Included","offer_id":31912455602249,"sku":"STM STM-EVO79-UICP-AL-BR-HKS-AIT","price":472.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/STM-2_5in-Aluminum-Upper-Intercooler-Pipe-Kit-Brushed-Aluminum-2001-2006-Mitsubishi-Lancer-Evo-STM-EVO79-UICP-AL-BR.jpg?v=1744464652"},{"product_id":"injen-air-intake-upper-intercooler-pipe-kit-2008-mitsubishi-evolution-evo-x","title":"Injen Air Intake\/Upper Intercooler Pipe Kit 2008+ Mitsubishi Evolution EVO X","description":"\u003ch2 style=\"font-size:\n 1.2rem;\"\u003eInjen Air Intake\/Upper Intercooler Pipe Kit 2008+ Mitsubishi Evolution EVO X\u003c\/h2\u003e\n \u003cp\u003eFeatures a cast multi-stage tuned mid section for volumized airflow throughout the entire power band. Combined with the upper intercooler piping (included), the system eliminates hose expansion to increase throttle body response going into boost. Dyno proven performance, not hype! This system will work with the factory Front mount on the Evo or with almost any of the aftermarket units.\u003c\/p\u003e\n\u003cp\u003eThe BOV flange on the upper IC pipe will fit the stock blow off valve or any aftermarket BOV that fits with the stock flange.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUpper Intercooler Piping\u003c\/li\u003e\n\u003cli\u003eBlow off Valve recirculation\u003c\/li\u003e\n\u003cli\u003eMulti-Stage Tuned intake\u003c\/li\u003e\n\u003cli\u003eCompletely bolt- on application\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Injen","offers":[{"title":"Polished","offer_id":31912456486985,"sku":"INJ SP1899P","price":825.96,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":31912456519753,"sku":"INJ SP1899BLK","price":825.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Injen-Air-IntakeUpper-Intercooler-Pipe-Kit-2008-Mitsubishi-Evolution-EVO-X.jpg?v=1744464693"},{"product_id":"stm-2-5in-aluminum-upper-intercooler-pipe-kit-wrinkle-black-2001-2006-mitsubishi-lancer-evo-stm-evo79-uicp-al-wbk","title":"STM 2.5in Aluminum Upper Intercooler Pipe Kit - Wrinkle Black | 2001-2006 Mitsubishi Lancer Evo (STM-EVO79-UICP-AL-WBK)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eWrinkle Black Aluminum Upper Intercooler Pipe Kit by STM\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe STM 2.5\" Upper Intercooler Pipe Kit for the Evolution VII-VIII-IX features smooth, mandrel bent, lightweight 2.5\" aluminum piping with bead-rolled ends with your choice of blow off valve flange and the option for an AIT bung. Includes 6 stainless T-Bolt clamps and 3 high-quality black, silicone couplers.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThis kit is designed to work with any manifold that utilizes the factory throttle body location, including OEM, Skunk2, Driven Innovations, AMS F1 and so on. The throttle body coupler is a 2.5\" - 2.75.\" These pipes will not clear a factory-sized battery. The STM Small Battery Kit is required for install. These pipes have been test-fitted and are compatible with the STM, OEM and Buschur intercoolers, and they will also work with any aftermarket intercooler utilizing the stock-placement of piping such as ETS.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLightweight 2.5\" Aluminum Piping\u003c\/li\u003e\n\u003cli\u003eSmooth Mandrel Bends\u003c\/li\u003e\n\u003cli\u003eBead-Rolled Pipe Ends\u003c\/li\u003e\n\u003cli\u003eHigh-Quality Couplers\u003c\/li\u003e\n\u003cli\u003eStainless T-Bolt Clamps\u003c\/li\u003e\n\u003cli\u003eWrinkle Black Finish\u003c\/li\u003e\n\u003cli\u003eChoice of Blow Off Valve Flange\u003c\/li\u003e\n\u003cli\u003eAdd AIT Bung (Optional)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThese pipes will not clear a factory-sized battery. The STM Small Battery Kit is required for install.\u003c\/li\u003e\n\u003cli\u003eThese pipes are aluminum and if you OVER-tighten the T-Clamps there is a chance of crimping the pipe.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2001 - 2003 Mitsubishi Lancer Evolution VII\u003c\/li\u003e\n\u003cli\u003e2003 - 2005 Mitsubishi Lancer Evolution VIII\u003c\/li\u003e\n\u003cli\u003e2005 - 2006 Mitsubishi Lancer Evolution IX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 - STM 2.5in Aluminum Pipes\u003c\/li\u003e\n\u003cli\u003e1 - 2.5inx4in Straight Black Silicone Coupler\u003c\/li\u003e\n\u003cli\u003e1 - 2.5in Himp Black Silicone Coupler\u003c\/li\u003e\n\u003cli\u003e1 - 2.5in-2.75in Reducer Silicone Coupler\u003c\/li\u003e\n\u003cli\u003e5 - 2.5in Stainless Steel T-Bolt Clamps\u003c\/li\u003e\n\u003cli\u003e1 - 2.75in Stainless Steel T-Bolt Clamp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSTM Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"STM","offers":[{"title":"Stock \/ No AIT Bung","offer_id":31912457076809,"sku":"STM STM-EVO79-UICP-AL-WBK-STK","price":488.96,"currency_code":"USD","in_stock":true},{"title":"Stock \/ AIT Bung Included","offer_id":31912457109577,"sku":"STM STM-EVO79-UICP-AL-WBK-STK-AIT","price":520.96,"currency_code":"USD","in_stock":true},{"title":"TiAL \/ No AIT Bung","offer_id":31912457142345,"sku":"STM STM-EVO79-UICP-AL-WBK-TIA","price":488.96,"currency_code":"USD","in_stock":true},{"title":"TiAL \/ AIT Bung Included","offer_id":31912457175113,"sku":"STM STM-EVO79-UICP-AL-WBK-TIA-AIT","price":520.96,"currency_code":"USD","in_stock":true},{"title":"Greddy \/ No AIT Bung","offer_id":31912457207881,"sku":"STM STM-EVO79-UICP-AL-WBK-GRE","price":488.96,"currency_code":"USD","in_stock":true},{"title":"Greddy \/ AIT Bung Included","offer_id":31912457240649,"sku":"STM STM-EVO79-UICP-AL-WBK-GRE-AIT","price":520.96,"currency_code":"USD","in_stock":true},{"title":"HKS \/ No AIT Bung","offer_id":31912457273417,"sku":"STM STM-EVO79-UICP-AL-WBK-HKS","price":488.96,"currency_code":"USD","in_stock":true},{"title":"HKS \/ AIT Bung Included","offer_id":31912457306185,"sku":"STM STM-EVO79-UICP-AL-WBK-HKS-AIT","price":520.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/STM-2_5in-Aluminum-Upper-Intercooler-Pipe-Kit-Wrinkle-Black-2001-2006-Mitsubishi-Lancer-Evo-STM-EVO79-UICP-AL-WBK.jpg?v=1744464700"},{"product_id":"ultimate-racing-cold-side-pipe-2003-2005-dodge-neon-srt-4-500011","title":"Ultimate Racing Cold Side Pipe | 2003-2005 Dodge Neon SRT-4 (500011)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eNeon SRT-4 Cold Side Hard Pipe by Ultimate Racing\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eHard pipe replacement for the factory intercooler cold side piping. Hard piping offers better flow and increased durability\/service life compared to the stock piping. Flanged for either HKS or TiAL blow off valves. Optional HKS or TiAL BOV Kit included upon request. Silicone couplers are available in either black or blue.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePolished stainless steel construction\u003c\/li\u003e\n\u003cli\u003eBead Rolled with 3-ply silicone hose\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the OEM cold pipe\u003c\/li\u003e\n\u003cli\u003eFlanged for either HKS or TiAL BOVs\u003c\/li\u003e\n\u003cli\u003eOptional complete kit with BOV of choice supplied\u003c\/li\u003e\n\u003cli\u003eChoice of Blue or Black Silicone Couplers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2003 - 2005 Dodge Neon SRT-4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - Cold Pipe\u003c\/li\u003e\n\u003cli\u003eCouplers and Clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUltimate Racing Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Ultimate Racing","offers":[{"title":"HKS Flange \/ Black Couplers \/ No BOV","offer_id":31912458682441,"sku":"ULT 500011\/HKS_BK","price":279.96,"currency_code":"USD","in_stock":true},{"title":"HKS Flange \/ Black Couplers \/ HKS BOV (+$285)","offer_id":31912458715209,"sku":"ULT 500011\/HKS_BK+HKSBOV","price":735.96,"currency_code":"USD","in_stock":true},{"title":"HKS Flange \/ Black Couplers \/ TiAL BOV (+$335)","offer_id":31912458747977,"sku":"ULT 500011\/HKS_BK+TiALBOV","price":816.96,"currency_code":"USD","in_stock":true},{"title":"HKS Flange \/ Blue Couplers \/ No BOV","offer_id":31912458780745,"sku":"ULT 500011\/HKS_BL","price":279.96,"currency_code":"USD","in_stock":true},{"title":"HKS Flange \/ Blue Couplers \/ HKS BOV (+$285)","offer_id":31912458813513,"sku":"ULT 500011\/HKS_BL+HKSBOV","price":735.96,"currency_code":"USD","in_stock":true},{"title":"HKS Flange \/ Blue Couplers \/ TiAL BOV (+$335)","offer_id":31912458846281,"sku":"ULT 500011\/HKS_BL+TiALBOV","price":816.96,"currency_code":"USD","in_stock":true},{"title":"TiAL Flange \/ Black Couplers \/ No BOV","offer_id":31912458879049,"sku":"ULT 500011\/TiAL_BK","price":279.96,"currency_code":"USD","in_stock":true},{"title":"TiAL Flange \/ Black Couplers \/ HKS BOV (+$285)","offer_id":31912458911817,"sku":"ULT 500011\/TiAL_BK+HKSBOV","price":735.96,"currency_code":"USD","in_stock":true},{"title":"TiAL Flange \/ Black Couplers \/ TiAL BOV (+$335)","offer_id":31912458944585,"sku":"ULT 500011\/TiAL_BK+TiALBOV","price":816.96,"currency_code":"USD","in_stock":true},{"title":"TiAL Flange \/ Blue Couplers \/ No BOV","offer_id":31912458977353,"sku":"ULT 500011\/TiAL_BL","price":279.96,"currency_code":"USD","in_stock":true},{"title":"TiAL Flange \/ Blue Couplers \/ HKS BOV (+$285)","offer_id":31912459010121,"sku":"ULT 500011\/TiAL_BL+HKSBOV","price":735.96,"currency_code":"USD","in_stock":true},{"title":"TiAL Flange \/ Blue Couplers \/ TiAL BOV (+$335)","offer_id":31912459042889,"sku":"ULT 500011\/TiAL_BL+TiALBOV","price":816.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Ultimate-Racing-Cold-Side-Pipe-2003-2005-Dodge-Neon-SRT-4-500011.jpg?v=1744464717"},{"product_id":"injen-intercooler-piping-kit-2016-2020-honda-civic-1-5t-ses1573icp","title":"Injen Intercooler Piping Kit | 2016-2020 Honda Civic 1.5T (SES1573ICP)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003e16-20 Honda Civic 1.5T Intercooler Piping Kit by Injen\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eLooking for a way to improve that spool-up, increase power, and make your engine bay look killer on that 10th Gen Civic of yours? Well then you’re in luck, because Injen Technology has you covered with the all new intercooler pipe upgrade kit SES1573ICP designed specifically for the 2016-2017 Honda Civic and Civic Si I4-1.5L (t).\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThis upgrade kit features 2.5\" hot-side and cold-side with mandrel-bent aluminum piping for smooth airflow, and reinforced silicone couplers for improved tolerance against heat and pressure. The SES1573ICP also includes high-quality stainless steel band clamps for a consistent and reliable holding power.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eInstallation is a piece of cake, requires no modification or cutting to any parts in the engine bay, and can be completed in under one hour. This Intercooler Pipe Kit is available in either polished, laser black, or wrinkle red finish and like our entire line of parts, includes the Injen Limited Lifetime Warranty.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMandrel-Bent Aluminum Piping\u003c\/li\u003e\n\u003cli\u003e2.5\" Hot-Side Diameter\u003c\/li\u003e\n\u003cli\u003e2.5\" Cold-Side Diameter\u003c\/li\u003e\n\u003cli\u003eReinforced Silicone Couplers\u003c\/li\u003e\n\u003cli\u003eEasy Installation (No Modification)\u003c\/li\u003e\n\u003cli\u003eAvailable in Polished, Laser Black or Wrinkle Red\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note: California Residents - Prop 65 Warning.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2016 - 2020 Honda Civic 1.5T\u003c\/li\u003e\n\u003cli\u003e2017 - 2020 Honda Civic Si 1.5T\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - Injen Intercooler Piping Set\u003c\/li\u003e\n\u003cli\u003eReinforced Couplers \u0026amp; Clamps\u003c\/li\u003e\n\u003cli\u003eNecessary Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInjen Limited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Injen","offers":[{"title":"Polished Finish","offer_id":31912459108425,"sku":"INJ SES1573ICP","price":782.96,"currency_code":"USD","in_stock":true},{"title":"Laser Black Finish","offer_id":31912459141193,"sku":"INJ SES1573ICPBLK","price":782.96,"currency_code":"USD","in_stock":true},{"title":"Wrinkle Red Finish","offer_id":31912459173961,"sku":"INJ SES1573ICPWR","price":782.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Injen-Intercooler-Piping-Kit-2016-2020-Honda-Civic-1_5T-SES1573ICP.jpg?v=1744464720"},{"product_id":"aem-intercooler-charge-pipe-kit-2010-2014-mitsubishi-lancer-evolution-x-gsr-2102-b","title":"AEM Intercooler Charge Pipe Kit | 2010-2014 Mitsubishi Lancer Evolution X GSR (2102-B)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eAEM Intercooler Charge Pipe Kit\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe AEM 2102 Intercooler is designed to significantly reduce inlet air temperature and provide more volume than the stock intercooler on certain Mitsubishi Lancer Evolution GSR models. This intercooler is designed using computational fluid dynamics with flow data and has an extra port in the intercooler discharge tube for auxiliary devices like boost pressure sensor, temp probe or water injection nozzles. Check your state laws for legality of water injection on your car. Included are the intercooler charge pipes which are part of a two part kit and both AEM part numbers 2102-A and 2102-B are designed to be used together. Use of one without the other voids the warranty.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAssists in reducing temperature of incoming air\u003c\/li\u003e\n\u003cli\u003eA and B are used in combination with one another\u003c\/li\u003e\n\u003cli\u003eAdditional port for add-ons\u003c\/li\u003e\n\u003cli\u003eComes with a gunmetal gray finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEstimated Horsepower Gain 13.1 HP @ 4600 RPM\u003c\/li\u003e\n\u003cli\u003eIntake Pipe Color \/ Finish Gunmetal Gray\u003c\/li\u003e\n\u003cli\u003eIntake Pipe Material Aluminum\u003c\/li\u003e\n\u003cli\u003eOversize Shipping OS1\u003c\/li\u003e\n\u003cli\u003eProduct Box Height 10.6 in (269 mm)\u003c\/li\u003e\n\u003cli\u003eProduct Box Length 35.4 in (899 mm)\u003c\/li\u003e\n\u003cli\u003eProduct Box Width 13.3 in (338 mm)\u003c\/li\u003e\n\u003cli\u003eProduct Style AEM Intercooler Pipe\u003c\/li\u003e\n\u003cli\u003eTUV Approved (Europe) No\u003c\/li\u003e\n\u003cli\u003eWeight 11.2 lb (5.1 kg)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2010-2014 Mitsubishi Lancer Evolution X GSR\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIntercooler Piping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.aemintakes.com\/dynocharts\/AEM-26-2102_dyno.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDyno chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.aemintakes.com\/instructions\/AEM-26-2102_Inst.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.aemintakes.com\/instructions\/AEM-10-375_inst.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eInstallation Sheet Cut-out\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"AEM Induction Systems","offers":[{"title":"Default Title","offer_id":31912459468873,"sku":"AEM 2102-B","price":651.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/AEM-Intercooler-Charge-Pipe-Kit-2010-2014-Mitsubishi-Lancer-Evolution-X-GSR-2102-B.jpg?v=1744464743"},{"product_id":"mishimoto-lower-intercooler-pipe-kit-2001-2006-mitsubishi-evolution-7-8-9-mmicp-evo-01l","title":"Mishimoto Lower Intercooler Pipe Kit | 2001-2006 Mitsubishi Evolution 7\/8\/9 (MMICP-EVO-01L)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eEvo 7\/8\/9 Lower Intercooler Pipe Kit by Mishimoto\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eImprove airflow and turbo spool with Mishimoto mandrel bent aluminum intercooler pipes for the Mitsubishi Lancer Evolution 7\/8\/9. These pipe kits are designed with high-horsepower vehicles in mind and feature bead-rolled pipe ends for prevention of leaks and coupler disconnection. This Mishimoto Evo Intercooler Pipe Kit features silicone couplers that provide increased heat and pressure tolerance compared to the stock rubber counterparts. Whether you have a daily driven Evolution or a stripped and caged time attack car, airflow efficiency is key to optimizing your charge air system. These Mishimoto Evo intercooler pipes are available for purchase separately or as a kit. As with all our products, this kit is guaranteed by the Mishimoto Lifetime Warranty.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect fit for the Mitsubishi Lancer Evolution 7\/8\/9\u003c\/li\u003e\n\u003cli\u003eLightweight, mandrel bent, polished aluminum pipes\u003c\/li\u003e\n\u003cli\u003eEliminates restrictive bends found in the stock piping, providing more efficient airflow\u003c\/li\u003e\n\u003cli\u003eImproves turbocharger spool and provides support for high-horsepower vehicles\u003c\/li\u003e\n\u003cli\u003eBead-rolled ends to prevent boost leaks and coupler disconnection\u003c\/li\u003e\n\u003cli\u003eBlack, blue, or red silicone couplers provide increased heat and pressure tolerance\u003c\/li\u003e\n\u003cli\u003eMishimoto Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003eCARB EO #: D-759\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote: 27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2005 - 2007 Mitsubishi Evolution IX GSR\/MR\u003c\/li\u003e\n\u003cli\u003e2003 - 2005 Mitsubishi Evolution VIII GSR\/MR\u003c\/li\u003e\n\u003cli\u003e2001 - 2003 Mitsubishi Evolution VII GSR\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDiameter ID: 2.375\"\u003c\/li\u003e\n\u003cli\u003eDiameter OD: 2.50\"\u003c\/li\u003e\n\u003cli\u003eCoupler 1: 1.73\"-2.44\" ID \/ 2.125\"-2.83\" OD\u003c\/li\u003e\n\u003cli\u003eCoupler 2: 2.44\" ID \/ 2.83\" OD\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - Lower Intercooler Pipe\u003c\/li\u003e\n\u003cli\u003e2 - Lower Pipe Couplers\u003c\/li\u003e\n\u003cli\u003e1 - 2\" T-bolt Clamp\u003c\/li\u003e\n\u003cli\u003e3 - 2.75\" T-bolt Clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Mishimoto","offers":[{"title":"Black","offer_id":31912459501641,"sku":"MIS MMICP-EVO-01LBK","price":301.96,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":31912459534409,"sku":"MIS MMICP-EVO-01LBL","price":301.96,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":31912459567177,"sku":"MIS MMICP-EVO-01LRD","price":301.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Mishimoto-Lower-Intercooler-Pipe-Kit-2001-2006-Mitsubishi-Evolution-789-MMICP-EVO-01L.png?v=1744464747"},{"product_id":"forge-boost-pipes-2020-toyota-gr-supra-a90-fmb95","title":"Forge Boost Pipes | 2020 Toyota GR Supra A90 (FMB95)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eToyota GR Supra A90 Boost Pipes by Forge Motorsport\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe Forge free-flowing charge pipe kit will increase flow and improve the reliability of your B58 engine from BMW that is used in the A90 Toyota Supra. These high-quality aluminium pipes are a direct replacement and will fit in place of the OEM plastic pipe.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe OEM pipe can become brittle and fail under increased boost pressure, so we have developed a replacement with an increased diameter, which helps to reduce turbulence and maximize flow into the engine. The boost pipe also has 2 x 1\/8th\" water meth\/nitrous bosses incorporated into the design for tuners to keep inlet air temperatures on the safer side while pushing the B58 engine to its limits and aiding the option for a maximum power output.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLightweight high grade 6061 Aluminium piping\u003c\/li\u003e\n\u003cli\u003eReplaces the factory soft plastic charge pipe which is prone to cracking\u003c\/li\u003e\n\u003cli\u003eIncrease in throttle response and reduces turbo lag\u003c\/li\u003e\n\u003cli\u003eIncludes all hardware and instructions for complete installation\u003c\/li\u003e\n\u003cli\u003eSilicon reducing coupler included\u003c\/li\u003e\n\u003cli\u003eBlack powder coated finish\u003c\/li\u003e\n\u003cli\u003ePrecision CNC machined MAP sensor boss, turbo and throttle body couplers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2020 Toyota GR Supra A90\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncreases Throttle Response\u003c\/li\u003e\n\u003cli\u003eReduces Turbo Lag\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 - Boost Pipes\u003c\/li\u003e\n\u003cli\u003e1 - Reducing Coupler\u003c\/li\u003e\n\u003cli\u003eClamps and Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReferences\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/files\/FMBP5_-_Toyota_supra_boost_pipes-_Fitting_Instructions.pdf?55426\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Forge","offers":[{"title":"Default Title","offer_id":31912459894857,"sku":"FOR FMBP5","price":454.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Forge-Boost-Pipes-2020-Toyota-GR-Supra-A90-FMB95.jpg?v=1744464764"},{"product_id":"aem-charge-pipe-recirculation-kit-2015-2020-subaru-wrx-26-3000rk","title":"AEM Charge Pipe Recirculation Kit | 2015-2020 Subaru WRX (26-3000RK)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003e15-19 Subaru WRX Charge Pipe Recirculation Kit by AEM\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe AEM 26-3000RK Charge Pipe Recirculation Kit is designed to work with the AEM 26-3000C Charge Pipe if you intend to use or retain your vehicle’s factory recirculation valve and not opt for replacing it with an aftermarket blow-off valve.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThis accessory kit comes complete with the proper hose lengths and fittings that are necessary for a quick and simple installation.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial Used: Reinforced Neoprene Rubber\u003c\/li\u003e\n\u003cli\u003eAn accessory for AEM Charge Pipe 26-3000C\u003c\/li\u003e\n\u003cli\u003eAllows for the use of the factory recirculation valve\u003c\/li\u003e\n\u003cli\u003eThe necessary fittings and hoses are included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2015 - 2020 Subaru WRX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - 21.5\" Length Reinforced Hose\u003c\/li\u003e\n\u003cli\u003e1 - 16.5\" Length Reinforced Hose\u003c\/li\u003e\n\u003cli\u003e1 - 2.5\" Length Reinforced Hose\u003c\/li\u003e\n\u003cli\u003e2 - 90 Degree Elbow Fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReferences\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.aemintakes.com\/instructions\/AEM-26-3000RK_inst.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAEM 90-Day Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"AEM Induction Systems","offers":[{"title":"Default Title","offer_id":31912460124233,"sku":"AEM 26-3000RK","price":68.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/AEM-Charge-Pipe-Recirculation-Kit-2015-2020-Subaru-WRX-26-3000RK.jpg?v=1744464777"},{"product_id":"ford-fiesta-st-hot-side-intercooler-pipe-kit-2014-ford-fiesta-st-mmicp-fist-14h","title":"Ford Fiesta ST Hot-Side Intercooler Pipe Kit | 2014+ Ford Fiesta ST (MMICP-FIST-14H)","description":"\u003ch2 style=\"font-size:\n 1.2rem;\"\u003eFord Fiesta ST Hot-Side Intercooler Pipe Kit | 2014+ Ford Fiesta ST (MMICP-FIST-14H)\u003c\/h2\u003e\n \u003cdiv id=\"newdescr\"\u003e\n\u003cdiv\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003cp align=\"justify\"\u003eIncrease the airflow to your 1.6L EcoBoost with the Mishimoto hot-side Fiesta ST intercooler pipe kit for the 2014+ Ford Fiesta ST. The stock hot-side Fiesta ST intercooler piping is riddled with restrictive bends and small diameter sections that impede airflow. The Mishimoto intercooler piping has a 2.5\" diameter and is mandrel-bent to eliminate any restrictions. When you’re turning up the boost on your Fiesta, these pipes will have no problem supporting the power you throw at them.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThese hot-side Fiesta ST intercooler pipes feature durable silicone couplers and stainless steel T-bolt clamps to ensure leak-free connections. Installation can completed in under 30 minutes with no modifications to the engine bay, as Mishimoto’s Fiesta ST intercooler piping is a direct fit and works with both the stock and Mishimoto performance Fiesta ST intercooler.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e51% increased internal volume over the stock hot-side pipe\u003c\/li\u003e\n\u003cli\u003eOne-piece design for uninterrupted airflow and easy installation\u003c\/li\u003e\n\u003cli\u003eReplaces the small and restrictive hot side intercooler pipe with 2.5\" lightweight mandrel-bent aluminum pipe\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstalls in under 30 minutes\u003c\/li\u003e\n\u003cli\u003eDirect fit for the 2014+ Ford Fiesta ST\u003c\/li\u003e\n\u003cli\u003e+4 whp and +5 wtq gains over the stock hot side pipe with no tuning necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2014+ Ford Fiesta ST\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Aluminum Pipe\u003c\/li\u003e\n\u003cli\u003e2 Silicone Couplers\u003c\/li\u003e\n\u003cli\u003e1 1.75\" T-Bolt Clamp\u003c\/li\u003e\n\u003cli\u003e3 2.75\" T-Bolt Clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eMishimoto Lifetime Warranty\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Mishimoto","offers":[{"title":"Polished","offer_id":31912460157001,"sku":"MIS MMICP-FIST-14HP","price":254.96,"currency_code":"USD","in_stock":true},{"title":"Wrinkle Black","offer_id":31912460189769,"sku":"MIS MMICP-FIST-14HWBK","price":254.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Ford-Fiesta-ST-Hot-Side-Intercooler-Pipe-Kit-2014-Ford-Fiesta-ST-MMICP-FIST-14H.jpg?v=1744464782"},{"product_id":"aem-charge-pipe-kit-2016-2017-honda-civic-1-5t-si-26-3003c","title":"AEM Charge Pipe Kit | 2016-2017 Honda Civic 1.5T\/Si (26-3003C)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eIntercooler Charge Pipe for 16-17 Honda Civic 1.5T\/Si by AEM\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe AEM 26-3003C Intercooler Charge Pipe Kit is a free-flowing, mandrel-bent aluminum tube designed to replace the restrictive factory intercooler piping on specific turbo charged Honda Civic models.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe AEM charge pipe has been engineered to reduce turbo charged air pressure loss as well as dramatically increase air flow from the intercooler to the engine. The specialized aerodynamic tube design produces a noticeable horsepower and acceleration gain from your engine. This cold-side charge pipe has two provisions for 1\/8 inch NPT ports for you to optionally add either a water-methanol injection or a nitrous oxide modification.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe AEM intercooler piping is constructed from lightweight aluminum with a durable gunmetal gray powder coated finish. The charge pipe kit is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncreases horsepower and acceleration\u003c\/li\u003e\n\u003cli\u003eAllows for the use of after-market bypass or blow-off valves\u003c\/li\u003e\n\u003cli\u003eLow restriction aluminum tubing\u003c\/li\u003e\n\u003cli\u003eEasy to install using commonly available tools\u003c\/li\u003e\n\u003cli\u003eAEM Lifetime Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2016 - 2017 Honda Civic 1.5T\u003c\/li\u003e\n\u003cli\u003e2017 Honda Civic Si 1.5T\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - AEM Charge Pipe\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReferences\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/files\/AEM-26-3003_inst.pdf?606838132979961239\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAEM Limited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"AEM Induction Systems","offers":[{"title":"Default Title","offer_id":31912460746825,"sku":"AEM 26-3003C","price":400.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/AEM-Charge-Pipe-Kit-2016-2017-Honda-Civic-1_5TSi-26-3003C.jpg?v=1744464804"},{"product_id":"ets-titanium-complete-intercooler-piping-kit-2003-2006-mitsubishi-evo-8-9-evo-titanium-piping-kit","title":"ETS Titanium Complete Intercooler Piping Kit | 2003-2006 Mitsubishi Evo 8\/9 (Evo-Titanium-Piping-Kit)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eMitsubishi Evo 8\/9 Titanium Complete Intercooler Piping Kit by ETS\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe ETS Evo Piping kit is designed to eliminate many of the unnecessary bends in the stock piping. Our complete piping kit starts off by immediately expanding into 2.5\" right off of the turbo elbow. This replaces the tiny 1 3\/4\" factory pipe and instantly adds an extra 15hp and greatly improves spool. From here it follows the core support and wraps around to the intercooler.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eOnce the air passes through the intercooler, the piping takes a short direct path around the core support, over the transmission and straight up to the throttle body. This unique routing is over two feet shorter than the stock routing which results in greatly improved spool.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTitanium Mandrel Bent Piping with Burned Finish\u003c\/li\u003e\n\u003cli\u003eShort Route: Two feet shorter than stock\u003c\/li\u003e\n\u003cli\u003eLower piping flows over 20% more\u003c\/li\u003e\n\u003cli\u003eUpper Piping flows over 12% more\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2003 - 2006 Mitsubishi Evolution 8\/9\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - ETS Titanium IC Pipe Set (Upper and Lower)\u003c\/li\u003e\n\u003cli\u003eCouplers and Clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"ETS","offers":[{"title":"2.75\" \/ Stock MAF \/ TiAL BOV with Recirculation Coupler","offer_id":31912460779593,"sku":"ETS 100-20-ICP-170","price":952.96,"currency_code":"USD","in_stock":true},{"title":"2.75\" \/ Stock MAF \/ HKS BOV with Recirculation Coupler","offer_id":31912460812361,"sku":"ETS 100-20-ICP-171","price":895.96,"currency_code":"USD","in_stock":true},{"title":"2.75\" \/ Stock MAF \/ Greddy BOV with Recirculation Coupler","offer_id":31912460845129,"sku":"ETS 100-20-ICP-172","price":952.96,"currency_code":"USD","in_stock":true},{"title":"3.00\" \/ Stock MAF \/ TiAL BOV with Recirculation Coupler","offer_id":31912460877897,"sku":"ETS 100-20-ICP-173","price":952.96,"currency_code":"USD","in_stock":true},{"title":"3.00\" \/ Stock MAF \/ HKS BOV with Recirculation Coupler","offer_id":31912460910665,"sku":"ETS 100-20-ICP-174","price":952.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/ETS-Titanium-Complete-Intercooler-Piping-Kit-2003-2006-Mitsubishi-Evo-89-Evo-Titanium-Piping-Kit.jpg?v=1744464807"},{"product_id":"stm-aluminum-lower-intercooler-pipe-kit-2008-2015-mitsubishi-evo-x-stm-evox-licp-al","title":"STM Aluminum Lower Intercooler Pipe Kit | 2008-2015 Mitsubishi Evo X (STM-EVOX-LICP-AL)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eSTM Evo X Aluminum Lower Intercooler Pipe (Non-MR)\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe STM Lower Intercooler Pipe Kit for the Evo X with manual transmission replaces the pipe from your intercooler to throttle body. Features tig welded, 2.5\" aluminum piping with three finish options and a TiAL blow off valve flange. Also includes 4 stainless T-Bolt clamps and 2 high-quality black, STM silicone couplers. Comes flanged for a TiAL blow off valve. If you wish to use a recirculated valve, you will need to make your own return hose.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLightweight 2.5\" Aluminum Piping\u003c\/li\u003e\n\u003cli\u003eTiAL Blow Off Valve Flange\u003c\/li\u003e\n\u003cli\u003eBead-Rolled Pipe Ends\u003c\/li\u003e\n\u003cli\u003eHigh-Quality Couplers\u003c\/li\u003e\n\u003cli\u003eStainless T-Bolt Clamps\u003c\/li\u003e\n\u003cli\u003eMade in the USA!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePLEASE NOTE: These pipes are aluminum and if you OVER-tighten the T-Clamps there is a chance of crimping the pipe. STM runs aluminum intercooler pipes on all our 8-second builds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2008-2015 Mitsubishi Lancer Evolution X\u003c\/li\u003e\n\u003cli\u003eNotes: Does not fit SST MR Models\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) 2.5\" Aluminum Pipe with TiAL Flange\u003c\/li\u003e\n\u003cli\u003e(3) 2.5\" T-Bolt Clamps\u003c\/li\u003e\n\u003cli\u003e(1) 2.75\" T-Bolt Clamp\u003c\/li\u003e\n\u003cli\u003e(1) 2.75\" - 2.5\" 45° Reducing Coupler\u003c\/li\u003e\n\u003cli\u003e(1) 2.5\" x 4\" Straight Coupler\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSTM Lifetime Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"STM","offers":[{"title":"Brushed Aluminum","offer_id":31912461008969,"sku":"STM STM-EVOX-LICP-AL_BRU","price":446.96,"currency_code":"USD","in_stock":true},{"title":"Polished Aluminum","offer_id":31912461041737,"sku":"STM STM-EVOX-LICP-AL_POL","price":495.96,"currency_code":"USD","in_stock":true},{"title":"Gloss Black Powdercoat","offer_id":31912461074505,"sku":"STM STM-EVOX-LICP-AL_BLK","price":542.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/STM-Aluminum-Lower-Intercooler-Pipe-Kit-2008-2015-Mitsubishi-Evo-X-STM-EVOX-LICP-AL.jpg?v=1744464814"},{"product_id":"samco-intercooler-hose-kit-evo-viii-ix","title":"Samco Intercooler Hose Kit (Evo VIII\/IX)","description":"\u003ch2 style=\"font-size: \n 1.2rem;\"\u003eSamco Intercooler Hose Kit (Evo VIII\/IX)\u003c\/h2\u003e Samco silicon hoses are extremely durable and hand made for best fitment, flow, and strength. The 3 ply hose comes in a 6 or 7 piece kit for all your turbo hose parts. The kit is available in blue, red, and black. Each hose has the Samco logo on it.\u003ceol\u003e\u003c\/eol\u003e","brand":"Samco Sport","offers":[{"title":"Black \/ Evo Ix","offer_id":31912461140041,"sku":"SAM TCS299-BLK","price":508.96,"currency_code":"USD","in_stock":true},{"title":"Black \/ Evo Viii","offer_id":31912461172809,"sku":"SAM TCS167-BLK","price":446.96,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Evo Ix","offer_id":31912461205577,"sku":"SAM TCS299-BLU","price":508.96,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Evo Viii","offer_id":31912461238345,"sku":"SAM TCS167-BLU","price":446.96,"currency_code":"USD","in_stock":true},{"title":"Red \/ Evo Ix","offer_id":31912461271113,"sku":"SAM TCS299-RED","price":508.96,"currency_code":"USD","in_stock":true},{"title":"Red \/ Evo Viii","offer_id":31912461303881,"sku":"SAM TCS167-RED","price":446.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Samco-Intercooler-Hose-Kit-Evo-VIIIIX.jpg?v=1744464819"},{"product_id":"mishimoto-lower-intercooler-pipe-kit-2008-2015-mitsubishi-evo-x-mmicp-evo-10l","title":"Mishimoto Lower Intercooler Pipe Kit | 2008-2015 Mitsubishi Evo X (MMICP-EVO-10L)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eMitsubishi Evo X Lower Intercooler Pipe Kit by Mishimoto\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eReplace your restrictive and failure-prone factory Evo intercooler pipe with the Mishimoto Mitsubishi Evolution X Intercooler Pipe Kit, precision engineered for flawless fitment and optimal flow for the Mitsubishi Evolution X. The kit includes everything needed to upgrade your lower intercooler pipe, remove restrictive bends, and support substantial boost pressure and horsepower.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThis kit features polished 2.5\" mandrel-bent aluminum piping and four-layer 100% silicone couplers with heat-resistant embedded fibers, which offer increased heat and pressure tolerance compared to the factory rubber connections. Whether you have a daily-driven Evo or a rally project, dependable charge-air connections are essential for reliable operation.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe Mishimoto Mitsubishi Evolution X Intercooler Pipe Kit includes high-quality stainless steel T-bolt clamps for each connection. These clamps provide the holding power you need for increased boost pressures! This kit is available with black, red, or blue couplers and includes the Mishimoto Lifetime Warranty\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect fit for the Evo X\u003c\/li\u003e\n\u003cli\u003eLightweight, polished aluminum pipes\u003c\/li\u003e\n\u003cli\u003eYour choice of black, red, or blue couplers\u003c\/li\u003e\n\u003cli\u003eMishimoto Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003eCARB EO #: D-759\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOffers Flawless Fitment and Optimal Flow\u003c\/li\u003e\n\u003cli\u003eEliminates Restrictive Bends\u003c\/li\u003e\n\u003cli\u003eSupports Substantial Boost Pressure \u0026amp; Horsepower\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note: 27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2008 - 2015 Mitsubishi Evo X\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePipe ID: 2.375\"\u003c\/li\u003e\n\u003cli\u003ePipe OD: 2.50\"\u003c\/li\u003e\n\u003cli\u003eCoupler 1: 2.44\"\/2.71\", 2.83\"\/3.11\"\u003c\/li\u003e\n\u003cli\u003eCoupler 2: 2.44\", 2.83\"\u003c\/li\u003e\n\u003cli\u003eCoupler 3: 2.44\", 2.83\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 - Polished Aluminum Pipes\u003c\/li\u003e\n\u003cli\u003e3 - Silicone Couplers\u003c\/li\u003e\n\u003cli\u003e5 - 2.75\" T-bolt Clamps\u003c\/li\u003e\n\u003cli\u003e1 - 3\" T-bolt Clamp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReferences\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.mishimoto.com\/media\/productpdf\/MMICP-EVO-10_INSTALLATIONGUIDE.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Mishimoto","offers":[{"title":"Black","offer_id":31912461402185,"sku":"MIS MMICP-EVO-10LBK","price":365.96,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":31912461434953,"sku":"MIS MMICP-EVO-10LBL","price":365.96,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":31912461467721,"sku":"MIS MMICP-EVO-10LRD","price":365.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Mishimoto-Lower-Intercooler-Pipe-Kit-2008-2015-Mitsubishi-Evo-X-MMICP-EVO-10L.png?v=1744464822"},{"product_id":"ets-intercooler-piping-upgrade-kit-2016-ford-focus-rs-ets-focus-icp","title":"ETS Intercooler Piping Upgrade Kit | 2016+ Ford Focus RS (ETS-FOCUS-ICP)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eETS Ford Focus RS Intercooler Piping Kit Upgrade\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThis is a direct bolt on for the ETS intercooler or the factory intercooler, so you do not have to purchase one to have the other. From testing we immediately saw an increase in boost without even changing the tune, and overall everything performed better. This was last part installed before we went from a 12.2 to a 11.9 with www.theshopct.com's Focus RS.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2.5\" hotside and cold side charge pipes\u003c\/li\u003e\n\u003cli\u003eETS High Quality Silicone Couplers\u003c\/li\u003e\n\u003cli\u003eETS Stainless T-bolt Clamps\u003c\/li\u003e\n\u003cli\u003ePowdercoated Black finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2016+ Ford Focus RS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePiping\u003c\/li\u003e\n\u003cli\u003eCouplers\u003c\/li\u003e\n\u003cli\u003eHardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"ETS","offers":[{"title":"Default Title","offer_id":31912461664329,"sku":"ETS 400-10-ICP-001","price":712.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/ETS-Intercooler-Piping-Upgrade-Kit-2016-Ford-Focus-RS-ETS-FOCUS-ICP.jpg?v=1744464840"},{"product_id":"injen-upper-intercooler-pipe-kit-mitsubishi-lancer-ralliart-2009","title":"Injen Upper Intercooler Pipe Kit Mitsubishi Lancer Ralliart 2009+","description":"\u003ch2 style=\"font-size:\n 1.2rem;\"\u003eInjen Upper Intercooler Pipe Kit Mitsubishi Lancer Ralliart 2009+\u003c\/h2\u003e\n \u003cdiv align=\"center\"\u003e\u003ceol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ceol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/div\u003e\n\u003ceol\u003e\n\u003cp\u003eThe 2009+ Mitsubishi Lancer Ralliart Injen Intercooler Piping is a traditional, underhood intercooler system that is placed in the stock location of the factory upper intercooler pipe. \u003cbr\u003e \u003ceol\u003e \u003cbr\u003e \u003ceol\u003eEach Injen Intercooler Piping system is built from 6061, T6 aluminum alloy to ensure the lightest design possible. Every system is certified or pending by the California Air Resource Board and backed by Injen Technology's limited lifetime warranty. \u003c\/eol\u003e\u003c\/eol\u003e\u003c\/p\u003e\n\u003ceol\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003ceol\u003e\n\u003cul\u003e\u003ceol\u003e\n\u003cli\u003eIncreased HP over stock piping (+ 8 HP)\u003c\/li\u003e\n\u003ceol\u003e\n\u003cli\u003eIncreased Torque over stock piping (+ 8 ft\/lbs)\u003c\/li\u003e\n\u003ceol\u003e\n\u003cli\u003e6061 Aluminum Alloy\u003c\/li\u003e\n\u003ceol\u003e\n\u003cli\u003eInjen Lifetime warranty\u003c\/li\u003e\n\u003ceol\u003e\n\u003cli\u003eAvailable in a Black or Polished Finish\u003c\/li\u003e\n\u003ceol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/ul\u003e\n\u003ceol\u003e\n\u003cp\u003eFits: Mitsubishi Lancer Ralliart 2009+ 2.0T\u003c\/p\u003e\n\u003ceol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e","brand":"Injen","offers":[{"title":"Black","offer_id":31912461729865,"sku":"INJ SES1837ICPBLK","price":294.96,"currency_code":"USD","in_stock":true},{"title":"Polished","offer_id":31912461762633,"sku":"INJ SES1837ICP","price":294.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Injen-Upper-Intercooler-Pipe-Kit-Mitsubishi-Lancer-Ralliart-2009.jpg?v=1744464843"},{"product_id":"ultimate-racing-intercooler-hot-side-pipe-2003-2005-dodge-neon-srt-4-500021","title":"Ultimate Racing Intercooler Hot Side Pipe | 2003-2005 Dodge Neon SRT-4 (500021)","description":"\u003ch2 style=\"font-size: \n 1.2rem;\"\u003eUltimate Racing Intercooler Hot Side Pipe | 2003-2005 Dodge Neon SRT-4 (500021)\u003c\/h2\u003e \u003cp\u003e\u003cspan\u003eFeatures: \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eAluminium construction \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBead Rolled with 3-ply silicone hose \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eOption:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eChoice of Blue or Black Silicone Couplers\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ultimate Racing","offers":[{"title":"Black","offer_id":31912462123081,"sku":"ULT 500021-BLK","price":199.96,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":31912462155849,"sku":"ULT 500021-BLU","price":199.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Ultimate-Racing-Intercooler-Hot-Side-Pipe-2003-2005-Dodge-Neon-SRT-4-500021.jpg?v=1744464850"}],"url":"https:\/\/www.mobileigo.com\/en-ca\/collections\/turbo-intercooler-piping.oembed?page=4","provider":"mobileiGo.com","version":"1.0","type":"link"}