{"product_id":"icon-suspension-21-25-f-150-raptor-driver-rear-3-0-zeta-rxt-rr-cdev-95206l","title":"Rear, V.S. 3.0 Series Zeta Bypass RXT Shock Absorber, Remote Reservoir w\/ CDEV for 2021-2026 Ford F-150 Raptor, Driver – Icon Suspension 95206L","description":"\u003ch2 style=\"font-size:1.2rem;\"\u003eRear, V.S. 3.0 Series Zeta Bypass RXT Shock Absorber, Remote Reservoir w\/ CDEV for 2021-2026 Ford F-150 Raptor, Driver – Icon Suspension 95206L\u003c\/h2\u003e\u003cp\u003eRear remote reservoir shock absorber with CDEV electronic valves for the 2021-2026 Ford F-150 Raptor, driver side, part 95206L. It is an RXT 3.0 Series bypass shock with a 3.0-inch dual hose recirculating reservoir and clicker knobs that adjust without tools. The listing says the shock is designed to pair with ICON rear coil springs for 17 inches of usable rear wheel travel. The listing requires the w\/ CDEV option, so confirm your Raptor's equipment with mobileiGo before ordering.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCDEV electronic valve that reacts in less than 40 ms\u003c\/li\u003e\n\u003cli\u003e12.5-inch long, 3.0-inch diameter finned reservoir\u003c\/li\u003e\n\u003cli\u003eReplaceable bypass tubes for standard rebuilds\u003c\/li\u003e\n\u003cli\u003eUPC 840103435503, shipping weight 45.0 lb, manufacturer part number 95206L\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eVehicle fitment\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2021-2026 Ford F-150 Raptor, Driver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003ctd\u003e2021–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRequired options\u003c\/th\u003e\n\u003ctd\u003ew\/ CDEV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePosition\u003c\/th\u003e\n\u003ctd\u003erear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003eEngine, trim, drivetrain and options can change which part fits, so \u003ca href=\"\/en-au\/pages\/contact-us\"\u003econtact mobileiGo\u003c\/a\u003e with your VIN if you are unsure.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eIcon Suspension\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e95206L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e840103435503\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCategory\u003c\/th\u003e\n\u003ctd\u003eSuspension Components\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003ePerformance upgrade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping weight\u003c\/th\u003e\n\u003ctd\u003e45.0 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eBefore you buy: suspension part tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWorn bushings and links cause clunks and vague handling; replacing them restores precise steering.\u003c\/li\u003e\n\u003cli\u003eAn alignment is recommended after replacing parts that locate the wheels.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWill this shock fit my Raptor?\u003c\/h3\u003e\u003cp\u003eThe listing is for the 2021-2026 Ford F-150 Raptor, driver side, rear position, and requires the w\/ CDEV option. Confirm your truck's equipment with mobileiGo using your VIN.\u003c\/p\u003e\u003ch3\u003eDo I need the rear coil springs too?\u003c\/h3\u003e\u003cp\u003eThe listing says the shock is designed to be paired with ICON rear coil springs to reach 17 inches of usable rear wheel travel. Ask mobileiGo whether your setup includes them.\u003c\/p\u003e\u003ch3\u003eDo I need an alignment after replacing this shock?\u003c\/h3\u003e\u003cp\u003eThe listing says alignment is needed after changing parts that move the wheels, such as control arms, links and springs. It does not list shock absorbers in that group.\u003c\/p\u003e\u003ch3\u003eWhat is the part number?\u003c\/h3\u003e\u003cp\u003eThe manufacturer part number is 95206L, and the UPC is 840103435503.\u003c\/p\u003e\u003ch3\u003eIs an alignment needed after installation?\u003c\/h3\u003e\u003cp\u003eFor parts that change wheel position, such as control arms, links and springs, yes. Bars and braces usually do not need one.\u003c\/p\u003e\u003ch3\u003eIs this part new?\u003c\/h3\u003e\u003cp\u003eYes. It is a new part sourced from an authorized distributor.\u003c\/p\u003e\u003ch2\u003eManufacturer description\u003c\/h2\u003e\u003cdiv class=\"tt-mfr\"\u003e\n\u003cp\u003eICON Vehicle Dynamics is known for its extensive research and development put into every product, the revolutionary outcome of this research is what sets ICON apart from the off-road industry standard. The Ford F-150 Raptor is a unique production truck, designed \u0026amp; built, to bridge the gap between a standard street “pickup truck” and an off-road pre-runner. Since the F-150 Raptor’s release ICON Vehicle Dynamics’ engineers have pushed this vehicle to extremes in order to develop the most comprehensive suspension components on the market. From the brutal deserts of Baja, to the deep snow of Michigan’s U.P., to the wooded trails of the East coast, ICON suspension systems have been put to the test and consistently perform beyond expectation. Unable to leave “well-enough” alone, ICON is once again aiming to raise the bar in Raptor performance with the introduction of the RXT Rear 3.0 Remote Reservoir Bypass Shock for the 2021-2026 Gen3 F-150 Raptor. The ICON RXT 3.0 Rear Bypass shock with 3.0 Dual Hose Remote Reservoir is truly the next level in Ford Raptor Performance for the rear of your truck. Their vehicle specific shock lengths are designed to be paired with ICON rear coil springs to allow for significantly more down-travel over stock, leaving you with 17 inches of usable rear wheel travel overall. The desire for increased travel was answered with a unique side-mount eyelet approach that allowed ICON engineers to develop a shock shorter in collapsed length, longer at extension, but still fits in the factory mounting location. A 3.0 Dual Hose Recirculating Reservoir (Patent Pending) incorporates a check valve that allows hot fluid in the shock body to be exchanged with cooler fluid in the reservoir. The 12.5” long, 3.0” diameter finned reservoir’s increased surface area further aids heat dissipation while also ensuring ample nitrogen volume. The result of this is the ability of the Raptor to be driven harder for longer periods of time without the worry of shock fade and degraded performance. ICON RXT Rear 3.0 Remote Reservoir Bypass Shocks are far from the norm when compared to a traditional bypass shock you see on Trophy Trucks and other off-road race vehicles. Each bypass valve has a specific port design and individually equipped with a different spring rate to ensure proper performance at each zone of shock travel. These same bypass valves feature damped valve stops for quiet and precise operation. That means no clicking noises as you hit bumps or road chatter driving down the road. The biggest difference in these shocks versus an industry standard bypass shock, are the included “Easy-to-Adjust” knobs and the replaceable bypass tubes. The “Easy to Adjust” High Resolution Clicker Knobs do not require any tools for adjustment, and can be adjusted in seconds from plush off-road performance to firm on road manners for extra control while driving the mountains or towing a trailer. Another unique feature of this shock is the replaceable bypass tubes that can be swapped out during a standard rebuild if any damage were to occur, where a normal bypass shock body would need to be completely replaced, saving you hundreds of dollars. ICON's exclusive Compression Damping Electronic Valves are also included for actively dialing in your suspension performance. Compression Damping Electronic Valve (CDEV) is an electronically controlled valve that meters the flow of oil to regulate the amount of damping force that is created by the shock when compressed. This infinitely variable valve can react in less than 40ms and has the ability to make extremely precise adjustments for varying terrain. CDEV’s hydraulic circuits are also custom tailored per application to create the highest resolution and dynamic range allowable for each specific vehicle. Powered by ICON Intelligent Control and proprietary ICON mobile app, the system uses information from the onboard G-force sensor and Gyroscope to perform calculations based on algorithms and user-defined settings to predict terrain and adjust shock settings via the CDEV accordingly. With the shock absorbers no longer directly wired to the Raptor's ECU the IIC\/CDEV system allows drivers to dial in their preferred shock damping settings independently from the selected vehicle drive mode and with more refined resolution than afforded by the factory system. This allows for a more customized vehicle set up with the perfect blend of comfort and performance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAPPLICATION NOTE #150: Shocks are fully serviceable\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #198: An iOS operated device is required to run ICON Intelligent Control app\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #204: Also requires installation of applicable IIC kit and CDEV front shocks\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #223: Vehicles equipped with single solenoid OE shock absorbers also require ICON solenoid mount kit part number 95020\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #226: Not compatible with OE rear coils. Shock length requires ICON rear coil springs part number 95230 or 95231.\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #227: Shocks are sold individually. Passenger side shock part # 95206R is also required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003c!-- tt-ap-ai v1 --\u003e\u003c!-- tt-ap-content v2 --\u003e","brand":"Icon Suspension","offers":[{"title":"Default Title","offer_id":67934571692351,"sku":"APG IVD95206L","price":1979.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/files\/95206L_RaptorZetaRear_web_large_c3bd920f-da5d-4da9-b573-995ede308287.jpg?v=1793635398","url":"https:\/\/www.mobileigo.com\/en-au\/products\/icon-suspension-21-25-f-150-raptor-driver-rear-3-0-zeta-rxt-rr-cdev-95206l","provider":"mobileiGo.com","version":"1.0","type":"link"}