{"product_id":"cd-5-carbon-digital-dash-displays-aem-electronics","title":"CD-5 Carbon Digital Dash Displays – AEM Electronics","description":"\u003ch2 style=\"font-size:1.2rem;\"\u003eCD-5 Carbon Digital Dash Displays – AEM Electronics\u003c\/h2\u003e\u003cp\u003eDigital dash display from AEM Electronics, part number 30-5600, with a full-color 5-inch screen at 800x480 resolution that is readable in direct sunlight. The carbon fiber housing is IP66 water resistant and weighs 11.7 oz. It has two CAN bus inputs and seven shift LEDs. The listing does not name vehicles. Compatibility depends on the signals your ECU provides, so confirm your setup with mobileiGo before ordering.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFull-color 5-inch screen, 800x480 resolution, sunlight readable\u003c\/li\u003e\n\u003cli\u003eIP66 water resistance; weight 11.7 oz (331 g)\u003c\/li\u003e\n\u003cli\u003eTwo CAN bus inputs; validated with over 250 non-AEM devices\u003c\/li\u003e\n\u003cli\u003eSeven ultra-bright shift LEDs and two programmable LEDs\u003c\/li\u003e\n\u003cli\u003ePlug and play adapter cables available for Holley, Link, MSD Atomic and Vi-Pec ECUs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eAEM Electronics\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e30-5600\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCategory\u003c\/th\u003e\n\u003ctd\u003eGauges \u0026amp; Accessories\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003ePerformance upgrade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping weight\u003c\/th\u003e\n\u003ctd\u003e2.2 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailable options\u003c\/th\u003e\n\u003ctd\u003eNon-Logging Digital Dash Display, GPS Enabled, Logging Digital Dash Display, GPS Enabled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eBefore you buy: gauge tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMechanical gauges read directly, while electric gauges use a sender; check what sender and fittings are included.\u003c\/li\u003e\n\u003cli\u003eChoose a gauge diameter that fits your pod or dash mount (52 mm and 60 mm are common).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWill this display work with my factory ECU?\u003c\/h3\u003e\u003cp\u003eThe manufacturer says 2008-up factory ECUs connect through the Plug and Play OBDII CAN adapter cable (PN 30-2217, sold separately). Contact mobileiGo with your year, make, model and engine to confirm.\u003c\/p\u003e\u003ch3\u003eWhat do I need for a carbureted or pre-2008 vehicle?\u003c\/h3\u003e\u003cp\u003eThe manufacturer says to use a 22 Channel CAN Sensor Module (PN 30-2212, sold separately) on carbureted and pre-2008 stock ECU vehicles.\u003c\/p\u003e\u003ch3\u003eDoes it work with non-AEM systems?\u003c\/h3\u003e\u003cp\u003eThe manufacturer says it has been validated with over 250 non-AEM devices. Third-party systems may need DBC CAN files if they are not included in the setup software.\u003c\/p\u003e\u003ch3\u003eWill this AEM Electronics gauge fit my vehicle?\u003c\/h3\u003e\u003cp\u003eCheck the sizes and application details in the specifications and manufacturer description below. \u003ca href=\"\/en-au\/pages\/contact-us\"\u003eContact mobileiGo\u003c\/a\u003e with your year, make, model and engine if you are unsure.\u003c\/p\u003e\u003ch3\u003eWhat is the part number?\u003c\/h3\u003e\u003cp\u003eThe manufacturer part number is 30-5600.\u003c\/p\u003e\u003ch3\u003eIs the sender included?\u003c\/h3\u003e\u003cp\u003eIncluded senders and fittings are listed in the manufacturer description when the kit comes with them.\u003c\/p\u003e\u003ch3\u003eIs this part new?\u003c\/h3\u003e\u003cp\u003eYes. It is a new part sourced from an authorized distributor.\u003c\/p\u003e\u003ch2\u003eManufacturer description\u003c\/h2\u003e\u003cdiv class=\"tt-mfr\"\u003e\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch2\u003eCD-5 Carbon Digital Dash Displays by AEM\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eCD-5 Carbon Digital Dash Displays feature a full-color, daylight readable screen surrounded by a tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housing for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting even with driving gloves on. These button functions are included in the supplied rear connector, allowing the user to mount remote buttons. Two additional programmable LEDs are located above the toggle buttons on the top of the housing on either side of the integrated LED shift lights.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe CD-5 Carbon receives channels from two independent CAN bus inputs and it does not require special modules to read AEM and\/or 3rd-party CAN signals. We have validated it to communicate with over 250 non-AEM devices, 2008-up stock ECUs via the OBDII port (see Supported Apps Tab), and the CD-5 Carbon can be added to any vehicle with the addition of our 22 Channel CAN Sensor Module. The CD-5 Carbon is ECU CAN ready and does not require external modules for CAN to CAN communication, just load your configuration and go! All channels can be named in virtually any language so that the information displayed makes sense to the user when displayed, whether on the main screens or warning alerts.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThird-party systems will require download of 3rd party DBC CAN bus protocol files for proper operation if they are not included in our setup software. We currently have over 250 validated 3rd party applications, and include a CD Dash Power Cable to simplify the installation of 3rd party devices. We have also developed 3rd Party Plug \u0026amp; Play Adapter Cables for certain applications, which are highlighted on our Supported Apps Tab and can be viewed on our Install Kits Tab.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe CD-5 Carbon’s warning and alarm feature puts an end to obscure warning LEDs! It features a powerful alarm editor to create warning alerts and alarms for any incoming channel using customizable text in almost any language. This allows you to see warnings and alarms with text values that you program, and eliminates having to guess the meaning behind a triggered warning LED or generic alarm like a check engine light.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eWe designed a dedicated alarm page that brings your attention to the dash in the event of a potentially catastrophic issue. The CD-5 Carbon triggers the alarm page whenever a user definable condition is met. This includes the status of the channel that triggered the alarm (for example, low oil pressure, low fuel pressure, high coolant temp, etc.), and if multiple alarm conditions are present, the CD-5 Carbon will scroll them on the screen in order of priority so you are aware of every critical alarm condition. This user-defined and prioritized scrollable feature is included for text warnings on the main pages as well.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull color 5” screen with 800x480 resolution\u003c\/li\u003e\n\u003cli\u003eDirect sunlight readable (1000cd\/m2 brightness and anti-glare filter)\u003c\/li\u003e\n\u003cli\u003eLayout files interchangeable with all versions of the CD-7\u003c\/li\u003e\n\u003cli\u003eWiring interface\/harness is identical to the CD-7\u003c\/li\u003e\n\u003cli\u003eRugged, lightweight flow-molded carbon fiber composite enclosure\u003c\/li\u003e\n\u003cli\u003eTotal display weight of 11.7 oz.\/331 grams\u003c\/li\u003e\n\u003cli\u003eIP66 water resistance allows for operation in boats and motorcycles without worry\u003c\/li\u003e\n\u003cli\u003eAccepts channels from two separate user programmable CAN bus connections – works with AEMnet enabled devices and non-AEM 3rd party devices side by side\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; Play Adapter Cables available for Holley, Link, MSD Atomic and Vi-Pec ECUs\u003c\/li\u003e\n\u003cli\u003eAccepts channels from 2008-up factory ECUs using Plug \u0026amp; Play OBDII CAN Adapter Cable (PN 30-2217, sold separately)\u003c\/li\u003e\n\u003cli\u003eInstall the CD-5 Carbon on carbureted and pre-2008 stock ECU-equipped vehicles using a 22 Channel CAN Sensor Module (PN 30-2212, sold separately)\u003c\/li\u003e\n\u003cli\u003eAvailable with or without 200Mb internal logging (up to 1,000Hz\/channel)\u003c\/li\u003e\n\u003cli\u003eAvailable with or without on-board GPS receiver and antenna\u003c\/li\u003e\n\u003cli\u003eAdd Vehicle Dynamics Module for GPS, 3-axis gyroscope and 3 axis accelerometer for G-loads, roll, pitch, yaw, track mapping and lap timing (PN 30-2206, sold separately)\u003c\/li\u003e\n\u003cli\u003eSeven programmable pages including four Main pages, Alarm, On-Change and Start-up pages\u003c\/li\u003e\n\u003cli\u003eDedicated Alarm page quickly identifies problems, programmable in almost any language! (user defined)\u003c\/li\u003e\n\u003cli\u003eUnique On-Change page can be used to identify map switching for boost, traction, lap times, etc.\u003c\/li\u003e\n\u003cli\u003eUse included page layouts and input your channels and text, or create your own from scratch\u003c\/li\u003e\n\u003cli\u003eFree DashDesign Graphics Editor software\u003c\/li\u003e\n\u003cli\u003eSeven LED RPM\/shift light indicators on top of the housing (programmable and dimmable)\u003c\/li\u003e\n\u003cli\u003eTwo programmable LEDs\u003c\/li\u003e\n\u003cli\u003eOdometer function\u003c\/li\u003e\n\u003cli\u003eOver 200 supplied fully programmable SAE and custom warning icons, and you can add your own\u003c\/li\u003e\n\u003cli\u003e‘Headlight-in’ connection dims the dash and LEDs during night operation\u003c\/li\u003e\n\u003cli\u003eTwo extra switch inputs included for displaying user-triggered events (blinkers, high beams etc.)\u003c\/li\u003e\nUser supplied graphics can be changed based on channel values (up to the full screen size)\n\u003cli\u003eConvert CAN bus channel values to user-defined text in multiple languages\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSupported Apps\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdaptronic M1200, M2000, M6000\u003c\/li\u003e\n\u003cli\u003eAdaptronic Modular series Plug-in ECUs\u003c\/li\u003e\n\u003cli\u003eAutosport Labs, AnalogX 4 Channel Analog to CAN Module\u003c\/li\u003e\n\u003cli\u003eBigStuff GEN4 Pro Xtreme ECUs\u003c\/li\u003e\n\u003cli\u003eBosch IMU 2-Axis Accel \u0026amp; Yaw Sensor\u003c\/li\u003e\n\u003cli\u003eEMS EM-Tech EM70, EM80, EM140, EM160 \u0026amp; EM180 ECUs\u003c\/li\u003e\n\u003cli\u003eFAST XFI 2.0 ECU\u003c\/li\u003e\n\u003cli\u003egaugeART 31-001, 8 Ch Analog Expansion Module\u003c\/li\u003e\n\u003cli\u003eGM\/Delphi MEFI-4b ECUs\u003c\/li\u003e\n\u003cli\u003eHaltech Elite 550\/750\/950\/1000\/1500\/2000\/2500\/2500T\u003c\/li\u003e\n\u003cli\u003eHaltech Platinum Pro\/Sport\/Sprint\u003c\/li\u003e\n\u003cli\u003eHaltech WBC1 \u0026amp; WBC2, 1 \u0026amp; 2 Ch CAN widebands\u003c\/li\u003e\n\u003cli\u003eHolley HP EFI, Dominator EFI ECUs CD-7 to Holley EFI Plug \u0026amp; Play Adapter Cable Available\u003c\/li\u003e\n\u003cli\u003eHondata KPro4 and S300 V3\u003c\/li\u003e\n\u003cli\u003eKMS MD35\u003c\/li\u003e\n\u003cli\u003eKMS Single Ch CAN wideband\u003c\/li\u003e\n\u003cli\u003eKMS 4 Ch EGT Module\u003c\/li\u003e\n\u003cli\u003eKMS 4 Ch Wheelspeed Module\u003c\/li\u003e\n\u003cli\u003eKMS 2 Ch DBW Module\u003c\/li\u003e\n\u003cli\u003eKMS Flex Fuel CAN Module\u003c\/li\u003e\n\u003cli\u003eLife Racing F42, F88, F90 \u0026amp; GDI Series\u003c\/li\u003e\n\u003cli\u003eLink G4+ based ECUs CD-7 to LinkG4+ ECUs Plug \u0026amp; Play Adapter Cable Available\u003c\/li\u003e\n\u003cli\u003eMegasquirt, MS3\u003c\/li\u003e\n\u003cli\u003eMicroTech LT-9C, LT-10C, LT-15C \u0026amp; LT-16C\u003c\/li\u003e\n\u003cli\u003eMotec M1, M84, M400, M600, M800, \u0026amp; M880\u003c\/li\u003e\n\u003cli\u003eMotec PDM15, PDM16, PDM30 \u0026amp; PDM32 Power Distribution\u003c\/li\u003e\n\u003cli\u003eMotec PLM Lambda\u003c\/li\u003e\n\u003cli\u003eMotec LTC, LTCD Lambda to CAN\u003c\/li\u003e\n\u003cli\u003eMotec E888, E816, CAN Expansion\u003c\/li\u003e\n\u003cli\u003eMSD AtomicEFI Throttle Body ECUs CD-7 to MSD Atomic TBI Plug \u0026amp; Play Adapter Cable Available\u003c\/li\u003e\n\u003cli\u003eMSD GRID Programmable Ignition\u003c\/li\u003e\n\u003cli\u003ePCS EGT-2000, 8 Ch EGT\u003c\/li\u003e\n\u003cli\u003ePerformance Electronics PE3 Series\u003c\/li\u003e\n\u003cli\u003eProEFI Pro128, Pro112, and Pro48\u003c\/li\u003e\n\u003cli\u003eRaceGrade TC8, 8 Ch EGT\u003c\/li\u003e\n\u003cli\u003eRaceGrade 8 Ch and 15 Ch Keypads\u003c\/li\u003e\n\u003cli\u003eRacepak V300SD, V500SD, Sportsman, G2X, \u0026amp; G2XPro\u003c\/li\u003e\n\u003cli\u003eRacepak 220-VM-USM, Universal 4 Sensor Analog\u003c\/li\u003e\n\u003cli\u003eRacepak 220-VP-IR, IR Tire \u0026amp; Brake Temp\u003c\/li\u003e\n\u003cli\u003eRacepak 220-VP-JB, Exhaust Temp\u003c\/li\u003e\n\u003cli\u003eRacepak 220-VP-PT, Pressure Sensor\u003c\/li\u003e\n\u003cli\u003eRacepak 220-VP-PT, Wheelie Bar Force\u003c\/li\u003e\n\u003cli\u003eRacepak 220-VP-RIDEHTXX, Laser Ride Height\u003c\/li\u003e\n\u003cli\u003eRacepak 220-VP-TC, Thermocouple\u003c\/li\u003e\n\u003cli\u003eRacepak 220-VP-TR, Coolant\/Air\/Oil\/Trans\/Diff Temp\u003c\/li\u003e\n\u003cli\u003eSyvecs S6, S6+, S6I, S8, SDI \u0026amp; S12 ECU’s\u003c\/li\u003e\n\u003cli\u003eTechmor AC-1-4, 4 Ch Analog Expansion\u003c\/li\u003e\n\u003cli\u003eTechmor IR-1 Non-Contact IR Tire Temperature\u003c\/li\u003e\n\u003cli\u003eTechmor AP-1, 16 Ch Aero Pressure Sensor\u003c\/li\u003e\n\u003cli\u003eTechmor SG-1-C, Strain Gauge Amplifier\u003c\/li\u003e\n\u003cli\u003eVi-PEC i44-i88 ECUs CD-7 to Vi-Pec i44\/i88 ECUs Plug \u0026amp; Play Adapter Cable Available\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - CD-5 Digital Dash Display\u003c\/li\u003e\n\u003cli\u003eAll Necessary Wiring\/Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstallation Instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMFGR. Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003c\/div\u003e\u003c!-- tt-ap-ai v1 --\u003e\u003c!-- tt-ap-content v2 --\u003e","brand":"AEM Electronics","offers":[{"title":"Non-Logging Digital Dash Display \/ GPS Enabled","offer_id":68144206512447,"sku":"MAP AEM 30-5602","price":1399.96,"currency_code":"USD","in_stock":true},{"title":"Logging Digital Dash Display \/ GPS Enabled","offer_id":68144206545215,"sku":"MAP AEM 30-5603","price":1749.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/files\/aem-electronics-28374745120838.jpg?v=1794839042","url":"https:\/\/www.mobileigo.com\/en-au\/products\/cd-5-carbon-digital-dash-displays-aem-electronics","provider":"mobileiGo.com","version":"1.0","type":"link"}