{"title":"KW Suspension","description":null,"products":[{"product_id":"kw-variant-2-coilover-kit-1999-2002-mercedes-benz-clk320-15225007","title":"KW Variant 2 Coilover Kit | 1999-2002 Mercedes-Benz CLK320 (15225007)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003e1999-2002 Mercedes Benz CLK320 V2 Coilover Kit by KW\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe KW Variant 2 \"inox-line\" coilovers are the perfect solution for drivers who want more than just outstanding looks and adjustable ride height. In addition to the stainless steel coilover struts, and corrosion-resistant components built for long term durability, the KW Variant 2 coilovers give you the ability to adjust the rebound damping characteristics with 16 clicks of adjustment allowing the fine tuning of the ride comfort or performance to their satisfaction.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eWith a KW coilover kit the driving experience is more dynamic and direct. With the rebound adjustability on our KW Variant 2 coilovers you can have more direct influence on the handling or comfort of the car. With 16 precise clicks you can adjust the KW dampers (firmer or more comfortable) without affecting the the compression damping fine tuned by our engineers.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe two-stage, patented TVR-A (Twin Valve Rebound - Adjustable) technology enables a small volume of oil to flow through an adjustable, conically shaped, low-speed bypass during low damper speeds, while in the case of higher damper speeds, the main rebound stage valve opens allowing a larger volumn of oil to flow. This provides a big improvement in terms of ride comfort without influencing the safety-relevant high-speed range. There are 16 precise clicks available for individual settings, so you can choose between more comfort or more body control.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eWith KW Variant 2 coilovers you can achieve maximum lowering within an approved lowering range that ensures a proper functioning suspension and adequate travel after your car is lowered. Even after years of use you can easily adjust the ride height thanks to the dirt resistant trapezoid thread and composite adjustment collar.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRebound stage damping is precisely tuned to the respective vehicle on our in-house drive dynamics test facility, with the setting fixed in the mid range.\u003c\/li\u003e\n\u003cli\u003eSpring seat is made from a wear resistant and friction-optimized polyamide composite material with a stainless steel insert.\u003c\/li\u003e\n\u003cli\u003eIn comparison to common coilovers, KW uses a friction-optimized and dirt insensitive trapezoidal thread for the perfect height-adjustable coilover.\u003c\/li\u003e\n\u003cli\u003eStruts are manufactured from high-quality stainless steel that is rust-proof\u003c\/li\u003e\n\u003cli\u003eTechnical component report is always included in the package and outlines the individual options for lowering the suspension of the respective vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eImproved ride quality and handling\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eVehicle-optimized adjustment ranges\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh quality components with a long lifespan\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1999-2002 Mercedes Benz CLK320\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - Variant 2 Coilover Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":31884385386569,"sku":"KWS 15225007","price":3119.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/KW-Variant-2-Coilover-Kit-1999-2002-Mercedes-Benz-CLK320-15225007.jpg?v=1744452839"},{"product_id":"kw-coilover-kit-variant-1-inox-line-multiple-subaru-fitments-10245004","title":"KW Coilover Kit Variant 1 Inox-Line | Multiple Subaru Fitments (10245004)","description":"\u003ch2 style=\"font-size:\n 1.2rem;\"\u003eKW Coilover Kit Variant 1 Inox-Line | Multiple Subaru Fitments (10245004)\u003c\/h2\u003e\n \u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\nCoilover Kit Variant 1 Inox-Line by KW\n\u003cp align=\"justify\"\u003eSporty handling combined with outstanding looks. with factory pre-configured damping.\u003cbr\u003eThe KW coilover kit Variant 1 inox-line is our entry model for more driving pleasure with an attractive and individually adjustable lowering. Due to its high-quality finish, the use of struts made from stainless steel, corrosion resistant springs and bump stops as well as compatible components stands for long driving pleasure not just the car's life.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eContinuous lowering\u003c\/b\u003e\u003cbr\u003eWith the KW coilover Variant 1 you can achieve maximum lowering in the TÜV-tested adjustment range. Depending on vehicle model this varies between 30 to 70mm or 50 to 90mm. Even after years you can adjust the height quickly and easily due to the dirt resistant trapezoid thread and composite collar. Lowering at the front axle is made using our one piece composite height adjuster, on the rear axle this is the same unless the car has a seperate spring and shock absorber. The supplied rear height adjuster sits either above or below the rear spring.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eThe benchmark for tuning fans\u003c\/b\u003e\u003cbr\u003eKW coilover Variant 1 inox-line satisfies the sporty driver with its harmonic basic setup. Our engineers develop for each vehicle a specific damper setup and spring rate to increase the driving pleasure with optimal balance of sportiness and practicality. In the end, you don't buy any coilover, but a KW coilover which has been developed specifically for your type of vehicle. KW as a manufacturer uses only its own resources, high quality components and the same damper technology as high-volume manufacturers. with the KW coilovers Variant 1 inox-line , rolling motions of the body will be reduced during compression and you benefit from genuine directness and sportier handling while driving.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSetup Factory pre-configured damping setup\u003c\/b\u003e\u003cbr\u003eThe KW coilover Variant 1 inox-line has a vehicle-specific, fixed configured damper setup. The spring and damper match perfectly, so that you will experience an optimized balance of sportiness and comfort while driving.\u003cbr\u003e\u003cbr\u003eEven with full load and maximum axle loads, the dampers always work with a sporty characteristic. Tuning fans whose focus are Show \u0026amp; Shine events are interested in the KW Variant 1 inox-line.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOptimally pre-adjusted\u003c\/li\u003e\n\u003cli\u003eSporty and comfortable dampening technology\u003c\/li\u003e\n\u003cli\u003eStainless steel technology inox-line\u003c\/li\u003e\n\u003cli\u003eIndividually height adjustable\u003c\/li\u003e\n\u003cli\u003eTÜV-tested adjustment range\u003c\/li\u003e\n\u003cli\u003eReady to install complete solution\u003c\/li\u003e\n\u003cli\u003eHigh quality components for a long durability\u003c\/li\u003e\n\u003cli\u003eComplete documentation for easy handling\u003c\/li\u003e\n\u003cli\u003eLowering FA\/RA: 25-55 mm\/25-45 mm\u003c\/li\u003e\n\u003cli\u003eAdjustment FA\/RA: Thread\/Thread\u003c\/li\u003e\n\u003cli\u003eMaterial: Stainless steel\u003c\/li\u003e\n\u003cli\u003eAxle Load FA\/RA: 990 kg\/- 960 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2004-2007 Subaru Impreza WRX\u003c\/li\u003e\n\u003cli\u003e2004 Subaru Impreza TS\u003c\/li\u003e\n\u003cli\u003e2004-2005 Subaru Impreza RS\u003c\/li\u003e\n\u003cli\u003e2006-2007 Subaru Impreza 2.5i\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCoilover Kit Variant 1 Inox-Line\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/docs.kwsuspension.de\/ea-KWGFwEA-h68645004.pdf\"\u003eClick Here for Installation Instructions\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":39621278793801,"sku":"KWS 10245004","price":2783.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/KW-Coilover-Kit-Variant-1-Inox-Line-Multiple-Subaru-Fitments-10245004.jpg?v=1744500198"},{"product_id":"kw-variant-3-coilovers-wrx-sti","title":"KW Variant 3 Coilovers (WRX\/STi)","description":"\u003ch2 style=\"font-size: \n 1.2rem;\"\u003eKW Variant 3 Coilovers (WRX\/STi)\u003c\/h2\u003e Spring rates: Front=455 \/ Rear=Progressive Spring (lbs\/inch)\u003ceol\u003e\u003ceol\u003eThe new Variant 3 is state-of-the-art technology for the skilled and experienced driver. The separate and independent compression and rebound damping options allow a truly individual driving set-up. These unique systems with the 3 individually adjustable components, allows for adjustment of the compression of the damper in the low-speed range, while the highspeed set-up, so decisive for driving comfort, has been preset by our engineers\u003ceol\u003e\u003ceol\u003e\u003ceol\u003e Independently adjustable damping technology -rebound and compression damping\u003ceol\u003e inox-line stainless steel technology at no extra charge\u003ceol\u003e Individual height adjustment\u003ceol\u003e German TUEV-tested adjustment parameters\u003ceol\u003e High-quality components for long life\u003ceol\u003e Comprehensive documentation for ease of use\u003ceol\u003e Infinitely adjustable rebound damping\u003ceol\u003e 14- level adjustable compression damping\u003ceol\u003e Unique, independently functioning damping power adjustment\u003ceol\u003e\u003ceol\u003eThis system down not include top hats. You can use your stock top hats or use any aftermarket ones that will work with stock struts.\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e","brand":"KW Suspension","offers":[{"title":"WRX\/04 STi","offer_id":39621278859337,"sku":"KWS 35245013","price":4320.96,"currency_code":"USD","in_stock":true},{"title":"STi 05+","offer_id":39621278892105,"sku":"KWS 35245014","price":4928.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/KW-Variant-3-Coilovers-WRXSTi.jpg?v=1744500201"},{"product_id":"kw-coilover-kit-variant-1-inox-line-2002-2003-subaru-impreza-rs-wrx-10245002","title":"KW Coilover Kit Variant 1 Inox-Line | 2002-2003 Subaru Impreza RS \/ WRX (10245002)","description":"\u003ch2 style=\"font-size:\n 1.2rem;\"\u003eKW Coilover Kit Variant 1 Inox-Line | 2002-2003 Subaru Impreza RS \/ WRX (10245002)\u003c\/h2\u003e\n \u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\nCoilover Kit Variant 1 Inox-Line by KW\n\u003cp align=\"justify\"\u003eSporty handling combined with outstanding looks. with factory pre-configured damping.\u003cbr\u003eThe KW coilover kit Variant 1 inox-line is our entry model for more driving pleasure with an attractive and individually adjustable lowering. Due to its high-quality finish, the use of struts made from stainless steel, corrosion resistant springs and bump stops as well as compatible components stands for long driving pleasure not just the car's life.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eContinuous lowering\u003c\/b\u003e\u003cbr\u003eWith the KW coilover Variant 1 you can achieve maximum lowering in the TÜV-tested adjustment range. Depending on vehicle model this varies between 30 to 70mm or 50 to 90mm. Even after years you can adjust the height quickly and easily due to the dirt resistant trapezoid thread and composite collar. Lowering at the front axle is made using our one piece composite height adjuster, on the rear axle this is the same unless the car has a seperate spring and shock absorber. The supplied rear height adjuster sits either above or below the rear spring.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eThe benchmark for tuning fans\u003c\/b\u003e\u003cbr\u003eKW coilover Variant 1 inox-line satisfies the sporty driver with its harmonic basic setup. Our engineers develop for each vehicle a specific damper setup and spring rate to increase the driving pleasure with optimal balance of sportiness and practicality. In the end, you don't buy any coilover, but a KW coilover which has been developed specifically for your type of vehicle. KW as a manufacturer uses only its own resources, high quality components and the same damper technology as high-volume manufacturers. with the KW coilovers Variant 1 inox-line , rolling motions of the body will be reduced during compression and you benefit from genuine directness and sportier handling while driving.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSetup Factory pre-configured damping setup\u003c\/b\u003e\u003cbr\u003eThe KW coilover Variant 1 inox-line has a vehicle-specific, fixed configured damper setup. The spring and damper match perfectly, so that you will experience an optimized balance of sportiness and comfort while driving.\u003cbr\u003e\u003cbr\u003eEven with full load and maximum axle loads, the dampers always work with a sporty characteristic. Tuning fans whose focus are Show \u0026amp; Shine events are interested in the KW Variant 1 inox-line.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOptimally pre-adjusted\u003c\/li\u003e\n\u003cli\u003eSporty and comfortable dampening technology\u003c\/li\u003e\n\u003cli\u003eStainless steel technology inox-line\u003c\/li\u003e\n\u003cli\u003eIndividually height adjustable\u003c\/li\u003e\n\u003cli\u003eTÜV-tested adjustment range\u003c\/li\u003e\n\u003cli\u003eReady to install complete solution\u003c\/li\u003e\n\u003cli\u003eHigh quality components for a long durability\u003c\/li\u003e\n\u003cli\u003eComplete documentation for easy handling\u003c\/li\u003e\n\u003cli\u003eLowering FA\/RA: 20-50 mm\/20-50 mm\u003c\/li\u003e\n\u003cli\u003eAdjustment FA\/RA: Thread\/Thread\u003c\/li\u003e\n\u003cli\u003eMaterial: Stainless steel\u003c\/li\u003e\n\u003cli\u003eAxle Load FA\/RA: 970 kg\/- 960 kg\u003c\/li\u003e\n\u003cli\u003eYear: 12\/2000-11\/2002\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2002-2003 Subaru Impreza RS\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2002-2003 Subaru Impreza WRX\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCoilover Kit Variant 1 Inox-Line\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/docs.kwsuspension.de\/ea-KWGFwEA-h68645002.pdf\"\u003eClick Here for Installation Instructions\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":39621279187017,"sku":"KWS 10245002","price":2783.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/KW-Coilover-Kit-Variant-1-Inox-Line-2002-2003-Subaru-Impreza-RS-WRX-10245002.jpg?v=1744500218"},{"product_id":"kw-coilover-kit-variant-3-inox-line-multiple-subaru-fitments-35245004","title":"KW Coilover Kit Variant 3 Inox-Line | Multiple Subaru Fitments (35245004)","description":"\u003ch2 style=\"font-size:\n 1.2rem;\"\u003eKW Coilover Kit Variant 3 Inox-Line | Multiple Subaru Fitments (35245004)\u003c\/h2\u003e\n \u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\nCoilover Kit Variant 3 Inox-Line by KW\n\u003cp align=\"justify\"\u003eUnlimited individuality for performance \u0026amp; comfort.\u003cbr\u003eDamping forces can be adjustment separately in rebound \u0026amp; compression.\u003cbr\u003eOur engineers have developed a sporty yet harmonious basic setup, as with any KW coilover kit. To be able to guarantee the perfect suspension setup we test on our KW 7-post rig, as well as extensive driving tests on country roads, motorways and even on the Nürburgring Nordschleife. For years, the KW coilover kit Variant 3 inox-line is one of the top aftermarket products and is a benchmark for coilovers. It convinces sports car drivers, tuner, large-and small series manufacturer such as Alpina, MTM, Manthey, Oettinger and many more leading companies in the international automotive industry with its damping characteristics, quality finish and durability.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAdvanced technology from motor sport\u003c\/b\u003e\u003cbr\u003eWith the KW coilovers Variant 3 inox-line you will get much more than just a sporty lowering and excellent driving behaviour on all roads. It is based on our long experience as a suspension manufacturer and supplier for international motor sport, such as the touring car series ADAC GT Masters, FIA GT1, FIA GT3, International GT Open, WTC, VLN and the legendary ADAC Zurich 24h-race Nürburgring.\u003cbr\u003e\u003cbr\u003eSimilar to our racing coilovers from the KW Competition program, the KW coilovers Variant 3 inox-line can be adjusted independently in compression and rebound damping. This individual adjustment possibility is much appreciated by sports car manufacturers, tuners and drivers worldwide.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eThe perfect suspension setup for more driving pleasure\u003c\/b\u003e\u003cbr\u003eIf you have already made your first performance modifications to your vehicle our KW coilovers Variant 3 will compliment your upgrades. The patented KW-valve technology for separate adjustment of rebound and compression damping allows you to individually setup your suspension.The adjustable KW bottom valve adjusts the low-speed range of the compression level in twelve clicks.\u003cbr\u003e\u003cbr\u003eYou don?t need any adjusting tools because of the patented compression adjuster at the lower end of the stainless steel housing. The adjustable compression damping with its twelve exact clicks allows you to manually influence body roll, without having to change the spring rate which optimally matches the rebound.\u003cbr\u003e\u003cbr\u003eWith the individually adjustable rebound setup of the KW coilover Variant 3 inox-line , you can directly influence the handling and comfort with its precise click adjustment. Depending on the vehicle type, the rebound valves of the KW twin-tube dampers on the upper end of the piston rod will be adjusted via an integrated adjustment wheel or a twist-adjustment wheel which is included in the delivery content.\u003cbr\u003e\u003cbr\u003eBy increasing the rebound force via the adjustment wheel body movements are reduced. You will have more stability during high speed cornering. If you change for example the wheel \/ tire combination (approved by the car manufacturer) to larger wheels, then with a KW coilover Variant 3 inox-line you will be able to adjust the car's handling perfectly.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eHigh quality, individual and durable\u003c\/b\u003e\u003cbr\u003eThe KW coilover Variant 3 inox-line kit and every single damper are subject to extensive quality tests during production to meet the high standards of our KW quality management. This is the only way we can meet our expectations to give up to five years warranty on our KW coilover Variant 3 inox-line when installed at one of our KW specialist dealer. KW coilover struts made of stainless steel are 100% rust-free and an unlimited life time.\u003cbr\u003e\u003cbr\u003eTherefore the operation of the continuous lowering via the dirt-resistant KW trapezoid thread and the KW composite collar is also not affected after years. By the individual lowering with its continuous adjustment range, you can emphasize the sportiness of your vehicle visually. A feature that is very popular in the performance-oriented tuning scene.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSetup: The individual adjustable rebound\u0026amp; compression damping of the KW Variant 3 inox-line\u003c\/b\u003e\u003cbr\u003eThe KW coilover kit Variant 3 inox-line is the perfect accessory for performance-oriented drivers and tuning enthusiasts who put a great demand on their suspension. The separately rebound and compression damping adjustable dampers with their well-thought-through click adjustment allow a perfect setup. So it is easy to influence the steering behaviour, directional stability, tire grip and handling characteristics when driving on the limit.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRebound and compression damping adjustable damper technology\u003c\/li\u003e\n\u003cli\u003eStainless steel technology inox-line\u003c\/li\u003e\n\u003cli\u003eIndividual, continuous lowering\u003c\/li\u003e\n\u003cli\u003eTÜV-tested adjustment range\u003c\/li\u003e\n\u003cli\u003eHigh quality components for a long life\u003c\/li\u003e\n\u003cli\u003eComplete documentation for an easy handling\u003c\/li\u003e\n\u003cli\u003eAdjustable rebound damping with 16 exact clicks\u003c\/li\u003e\n\u003cli\u003eAdjustable compression damping with 12 exact clicks\u003c\/li\u003e\n\u003cli\u003eUnique, independent from each other working damping force adjustment\u003c\/li\u003e\n\u003cli\u003eAdjustment FA\/RA: Thread\/Thread\u003c\/li\u003e\n\u003cli\u003eMaterial: Stainless steel\u003c\/li\u003e\n\u003cli\u003eAxle Load FA\/RA: 990 kg\/- 960 kg\u003c\/li\u003e\n\u003cli\u003eLowering FA\/RA: 25-55 mm\/25-45 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2004-2007 Subaru Impreza WRX\u003c\/li\u003e\n\u003cli\u003e2004 Subaru Impreza TS\u003c\/li\u003e\n\u003cli\u003e2004-2005 Subaru Impreza RS\u003c\/li\u003e\n\u003cli\u003e2006-2007 Subaru Impreza 2.5i\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCoilover Kit Variant 3 Inox-Line\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Instructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/docs.kwsuspension.de\/ea-KWGFwEA-h68645004.pdf\"\u003eClick Here for Installation Instructions\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":39621279350857,"sku":"KWS 35245004","price":4928.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/KW-Coilover-Kit-Variant-3-Inox-Line-Multiple-Subaru-Fitments-35245004.jpg?v=1744500224"}],"url":"https:\/\/www.mobileigo.com\/en-au\/collections\/kw-suspension.oembed","provider":"mobileiGo.com","version":"1.0","type":"link"}