{"title":"Dinan","description":null,"products":[{"product_id":"dinan-big-turbo-for-bmw-n55-ewg-445hp-multiple-fitments-d310-0110a","title":"Dinan Big Turbo for BMW N55 (EWG) - 445HP | Multiple Fitments (D310-0110A)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eBig Turbo for BMW N55s w\/ Electronic Wastegates by Dinan\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eFor the racing enthusiast or those just looking for the best, this is the ultimate upgrade to fully maximize the power output of your EWG N55 engine. The compressor wheel inside the turbocharger is increased in size allowing ~30% greater flow thus enabling additional boost pressures at higher engine speeds while retaining efficiency.These are fully cast turbos that are manufactured to Dinan specifications along with an upgraded thrust system over the stock turbo to ensure reliable and prolonged life. In order to attain maximum advertised power gains these big turbos will need to be paired with DINANTRONICS Stage 4, as well as Dinan's intercooler to fully regulate the boost increase and deliver a polished product although the exhaust and intake are also recommended.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFully cast turbo that is manufactured to Dinan specifications with an upgraded thrust system thereby avoiding lengthy turnaround times caused by a core exchange program.\u003c\/li\u003e\n\u003cli\u003eLarger billet compressor\/impeller wheel that allows ~30% greater flow over stock which then enables additional boost to be realized while retaining efficiency.\u003c\/li\u003e\n\u003cli\u003ePeak power: 445 HP @ 6000 RPM and 455 lb-ft @ 3000 RPM and a max gain of 128 HP @ 6000 RPM and 113 lb-ft @ 6000 RPM when coupled with other Dinan Performance upgrades. (Data from F22 M235i.) 448 HP @ 6500 RPM and 417 lb-ft @ 3000 RPM and a max gain of 152 HP @ 6500 RPM and 123 lb-ft @ 6500 RPM when coupled with other Dinan Performance upgrades. (Data from F32 435i. Other variants may differ.)\u003c\/li\u003e\n\u003cli\u003eDinan Installation instructions detail a procedure, which is quicker than BMW's turbo replacement procedure saving the end-user money and time at the shop (Applicable to RWD vehicles only)\u003c\/li\u003e\n\u003cli\u003eIncludes o-rings and gaskets needed for complete installation (RWD only)\u003c\/li\u003e\n\u003cli\u003eFactory matching new car warranty (4yr\/50k) when run in Dinan specification\u003c\/li\u003e\n\u003cli\u003e50 State Emissions legal; CARB EO # D-176-49\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note: Hardware supplied in the base turbo kit is only complete when installing on a RWD vehicle. If vehicle is an xDrive vehicle then additional hardware is required (P\/N D313-0117)\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2016 - 2017 BMW M2 F87 \u003c\/li\u003e\n\u003cli\u003e2014 - 2016 BMW M235i F22 \u003c\/li\u003e\n\u003cli\u003e2014 - 2016 BMW M235i xDrive F22 \u003c\/li\u003e\n\u003cli\u003e2013 - 2015 BMW 335i F30 \u003c\/li\u003e\n\u003cli\u003e2013 - 2015 BMW 335i xDrive F30\u003c\/li\u003e\n\u003cli\u003e2013 - 2015 BMW 335i GT xDrive F34\u003c\/li\u003e\n\u003cli\u003e2014 - 2016 BMW 435i F32\u003c\/li\u003e\n\u003cli\u003e2014 - 2016 BMW 435i xDrive F32\u003c\/li\u003e\n\u003cli\u003e2015 - 2016 BMW 435i Gran Coupe F36\u003c\/li\u003e\n\u003cli\u003e2015 - 2016 BMW 435i Gran Coupe xDrive F36\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - Dinan Big Turbo Kit\u003c\/li\u003e\n\u003cli\u003eNecessary Hardware (For RWD Only)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReferences\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/files\/e5e7655905823c68bc7ecc2e24ee07dc.pdf?5806259300501057105\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eDinan Manufacturer's Warranty\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Hardware Kit for RWD Only","offer_id":31897680707657,"sku":"DIN D310-0110A","price":2827.96,"currency_code":"USD","in_stock":true},{"title":"Include Hardware Kit for xDrive Models","offer_id":31897680740425,"sku":"DIN D310-0110A+D313-0117","price":3077.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-Big-Turbo-for-BMW-N55-EWG-445HP-Multiple-Fitments-D310-0110A.jpg?v=1744458155"},{"product_id":"dinan-big-turbo-upgrade-multiple-bmw-fitments-d310-0115","title":"Dinan Big Turbo Upgrade | Multiple BMW Fitments (D310-0115)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eBig Turbocharger Upgrade for BMW N55 Engines by Dinan\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eFor the racing enthusiast or those just looking for the best, this is the ultimate upgrade to fully maximize the power output of your turbocharged engine.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe compressor wheel inside the turbocharger is increased in size allowing greater flow thus enabling additional boost pressures at higher engine speeds while retaining efficiency. These are rebuilt factory turbos that are machined to Dinan specifications along with an upgraded thrust system to ensure reliable and prolonged life. In order to attain maximum advertised power gains these big turbos will need to be paired with Dinantronics Stage 4, as well as Dinan’s intercooler to fully regulate the boost increase and deliver a polished product although the exhaust and intake are also recommended.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFactory turbo that is machined to Dinan specifications with an upgraded thrust system.\u003c\/li\u003e\n\u003cli\u003eLarger billet compressor\/impeller wheel that allows greater flow over stock which then enables additional boost to be realized while retaining efficiency.\u003c\/li\u003e\n\u003cli\u003eDinan Installation instructions detail a procedure which is quicker than BMW’s turbo replacement procedure saving the end-user money and time at the shop.\u003c\/li\u003e\n\u003cli\u003eFactory matching new car warranty (4yr\/50k) when run in Dinan specification.\u003c\/li\u003e\n\u003cli\u003e52 State Emissions legal; CARB EO # D-176-49.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note: Includes o-rings and gaskets needed for complete installation on a RWD vehicle only. If installing on an xDrive vehicle Dinan P\/N D313-0117 is required for additional installation hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2012 - 2015 BMW 335i (F30\/34)\u003c\/li\u003e\n\u003cli\u003e2013 - 2015 BMW 335i xDrive (F30\/34)\u003c\/li\u003e\n\u003cli\u003e2014 - 2016 BMW 435i (F32\/36)\u003c\/li\u003e\n\u003cli\u003e2014 - 2016 BMW 435i xDrive (F32\/36)\u003c\/li\u003e\n\u003cli\u003e2013 - 2016 BMW M235i (F22\/23)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - Big Turbo Upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReferences\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/files\/4a6ddfa6ad716994d2a22cd660fa8bf5.pdf?17403600071509157119\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eManufacturer's Warranty\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31897686605897,"sku":"DIN D310-0115","price":2424.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-Big-Turbo-Upgrade-Multiple-BMW-Fitments-D310-0115.jpg?v=1744458265"},{"product_id":"dinan-big-turbo-upgrade-multiple-bmw-fitments-d313-0127","title":"Dinan Big Turbo Upgrade | Multiple BMW Fitments (D313-0127)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size: 1.3rem;\"\u003eDinan Big Turbo Upgrade\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eFor the BMW racing enthusiast or those just looking for the best, this is the ultimate upgrade to fully maximize the power output of your turbocharged BMW engine. The compressor wheel inside the turbocharger is increased in size allowing greater flow thus enabling additional boost pressures at higher engine speeds while retaining efficiency. These are rebuilt factory turbos that are machined to Dinan specifications along with an upgraded thrust system to ensure reliable and prolonged life. In order to attain maximum advertised power gains these big turbos will need to be paired with Dinantronics Stage 4, as well as Dinan’s intercooler to fully regulate the boost increase and deliver a polished product although the exhaust and intake are also recommended.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFactory turbo that is machined to Dinan specifications with an upgraded thrust system.\u003c\/li\u003e\n\u003cli\u003eLarger billet compressor\/impeller wheel that allows greater flow over stock which then enables additional boost to be realized while retaining efficiency.\u003c\/li\u003e\n\u003cli\u003eDinan Installation instructions detail a procedure which is quicker than BMW’s turbo replacement procedure saving the end-user money and time at the shop.\u003c\/li\u003e\n\u003cli\u003eIncludes o-rings and gaskets needed for complete installation. If installing on an xDrive vehicle Dinan P\/N D313-0117 or D313-0127 is required for additional installation hardware.\u003c\/li\u003e\n\u003cli\u003eFactory matching new car warranty (4yr\/50k) when run in Dinan specification.\u003c\/li\u003e\n\u003cli\u003e54 State Emissions legal; CARB EO # D-176-49.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2013-2016 BMW 328I XDRIVE ALL\u003c\/li\u003e\n\u003cli\u003e2014-2016 BMW 328I GT XDRIVE ALL\u003c\/li\u003e\n\u003cli\u003e2014-2016 BMW 328I XDRIVE ALL\u003c\/li\u003e\n\u003cli\u003e2014-2016 BMW 428I XDRIVE ALL\u003c\/li\u003e\n\u003cli\u003e2015-2016 BMW 228I XDRIVE ALL\u003c\/li\u003e\n\u003cli\u003e2015-2016 BMW 428I XDRIVE GRAN COUPE ALL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31897732087881,"sku":"DIN D313-0127","price":176.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-Big-Turbo-Upgrade-Multiple-BMW-Fitments-D313-0127.jpg?v=1744458954"},{"product_id":"dinan-big-turbo-upgrade-multiple-bmw-fitments-d313-0117","title":"Dinan Big Turbo Upgrade | Multiple BMW Fitments (D313-0117)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eDinan Big Turbo Upgrade\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eFor the racing enthusiast or those just looking for the best, this is the ultimate upgrade to fully maximize the power output of your turbocharged engine. The compressor wheel inside the turbocharger is increased in size allowing greater flow thus enabling additional boost pressures at higher engine speeds while retaining efficiency. These are rebuilt factory turbos that are machined to Dinan specifications along with an upgraded thrust system to ensure reliable and prolonged life. In order to attain maximum advertised power gains these big turbos will need to be paired with Dinantronics Stage 4, as well as Dinan’s intercooler to fully regulate the boost increase and deliver a polished product although the exhaust and intake are also recommended.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFactory turbo that is machined to Dinan specifications with an upgraded thrust system.\u003c\/li\u003e\n\u003cli\u003eLarger billet compressor\/impeller wheel that allows greater flow over stock which then enables additional boost to be realized while retaining efficiency.\u003c\/li\u003e\n\u003cli\u003eDinan Installation instructions detail a procedure which is quicker than BMW’s turbo replacement procedure saving the end-user money and time at the shop.\u003c\/li\u003e\n\u003cli\u003eIncludes o-rings and gaskets needed for complete installation. If installing on an xDrive vehicle Dinan P\/N D313-0117 or D313-0127 is required for additional installation hardware.\u003c\/li\u003e\n\u003cli\u003eFactory matching new car warranty (4yr\/50k) when run in Dinan specification.\u003c\/li\u003e\n\u003cli\u003e53 State Emissions legal; CARB EO # D-176-49.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2013-2015 BMW 335I XDRIVE ALL\u003c\/li\u003e\n\u003cli\u003e2014-2016 BMW 335I GT XDRIVE ALL\u003c\/li\u003e\n\u003cli\u003e2014-2016 BMW 435I XDRIVE ALL\u003c\/li\u003e\n\u003cli\u003e2015 BMW M235I XDRIVE ALL\u003c\/li\u003e\n\u003cli\u003e2015-2016 BMW 435I XDRIVE GRAN COUPE ALL\u003c\/li\u003e\n\u003cli\u003e2015-2016 BMW M235I XDRIVE ALL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31897732120649,"sku":"DIN D313-0117","price":239.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-Big-Turbo-Upgrade-Multiple-BMW-Fitments-D313-0117.jpg?v=1744458956"},{"product_id":"dinan-big-turbo-upgrade-multiple-bmw-fitments-d310-0120","title":"Dinan Big Turbo Upgrade | Multiple BMW Fitments (D310-0120)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eBig Turbocharger Upgrade for BMW N20 Engines by Dinan\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eFor the racing enthusiast or those just looking for the best, this is the ultimate upgrade to fully maximize the power output of your turbocharged engine.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe compressor wheel inside the turbocharger is increased in size allowing greater flow thus enabling additional boost pressures at higher engine speeds while retaining efficiency. These are rebuilt factory turbos that are machined to Dinan specifications along with an upgraded thrust system to ensure reliable and prolonged life. In order to attain maximum advertised power gains these big turbos will need to be paired with Dinantronics Stage 4, as well as Dinan’s intercooler to fully regulate the boost increase and deliver a polished product although the exhaust and intake are also recommended.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFactory turbo that is machined to Dinan specifications with an upgraded thrust system.\u003c\/li\u003e\n\u003cli\u003eLarger billet compressor\/impeller wheel that allows greater flow over stock which then enables additional boost to be realized while retaining efficiency.\u003c\/li\u003e\n\u003cli\u003eDinan Installation instructions detail a procedure which is quicker than BMW’s turbo replacement procedure saving the end-user money and time at the shop.\u003c\/li\u003e\n\u003cli\u003eFactory matching new car warranty (4yr\/50k) when run in Dinan specification.\u003c\/li\u003e\n\u003cli\u003e52 State Emissions legal; CARB EO # D-176-49.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note: Includes o-rings and gaskets needed for complete installation on a RWD vehicle only. If installing on an xDrive vehicle Dinan P\/N D313-0127 is required for additional installation hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2014 - 2016 BMW 228i (F22\/23)\u003c\/li\u003e\n\u003cli\u003e2015 - 2016 BMW 228i xDrive (F22\/23)\u003c\/li\u003e\n\u003cli\u003e2012 - 2016 BMW 328i (F30\/31\/34)\u003c\/li\u003e\n\u003cli\u003e2013 - 2016 BMW 328i xDrive (F30\/31\/34)\u003c\/li\u003e\n\u003cli\u003e2014 - 2016 BMW 328i GT xDrive (F30\/31\/34)\u003c\/li\u003e\n\u003cli\u003e2014 - 2015 BMW 428i (F32\/36)\u003c\/li\u003e\n\u003cli\u003e2014 - 2016 BMW 428i xDrive (F32\/36)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - Big Turbo Upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReferences\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/files\/a4dbd02a8156fba5fa64917d365792ce.pdf?167768426504056105\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer's Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31897732153417,"sku":"DIN D310-0120","price":2099.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-Big-Turbo-Upgrade-Multiple-BMW-Fitments-D310-0120.jpg?v=1744458957"},{"product_id":"dinan-alumnium-pedal-cover-set-multiple-bmw-fitments-d700-0000","title":"Dinan Alumnium Pedal Cover Set | Multiple BMW Fitments (D700-0000)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eDinan Alumnium Pedal Cover Set\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eStylish aluminum and rubber pedal pads add a great high performance look to the interior of your BMW, while providing plenty of grip for even slippery leather soles.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe pedal pads feature the Dinan logo and come complete with hardware for a simple installation. Available for Manual, Automatic ,SMG and DCT equipped cars.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e128i E82 Coupe 2008-2013\u003c\/li\u003e\n\u003cli\u003e135i E82 Coupe 2008-2010\u003c\/li\u003e\n\u003cli\u003e135i E88 Convertible 2008-2010\u003c\/li\u003e\n\u003cli\u003e135i E88 Convertible 2011-2013\u003c\/li\u003e\n\u003cli\u003e135i E82 Coupe 2011-2013\u003c\/li\u003e\n\u003cli\u003e323i E36  1998-1999\u003c\/li\u003e\n\u003cli\u003e323i \u0026amp; Ci, Conv., Wagon E46  1999-2000\u003c\/li\u003e\n\u003cli\u003e325i \u0026amp; Ci, xi, Conv., Wagon E46  2001-2006\u003c\/li\u003e\n\u003cli\u003e325i \u0026amp; Conv. E36  1992-1995\u003c\/li\u003e\n\u003cli\u003e325i \u0026amp; xi E90 Sedan 2006\u003c\/li\u003e\n\u003cli\u003e328i E93 Convertible 2007-2013\u003c\/li\u003e\n\u003cli\u003e328i E36  1996-1999\u003c\/li\u003e\n\u003cli\u003e328i \u0026amp; Ci E46  1999-2000\u003c\/li\u003e\n\u003cli\u003e328i \u0026amp; xi E92 Coupe 2007-2013\u003c\/li\u003e\n\u003cli\u003e328i \u0026amp; xi E90 Sedan 2007-2011\u003c\/li\u003e\n\u003cli\u003e330i \u0026amp; Ci, xi, Conv., ZHP E46  2001-2006\u003c\/li\u003e\n\u003cli\u003e330i \u0026amp; xi E90 Sedan 2006\u003c\/li\u003e\n\u003cli\u003e335i E93 Convertible 2007-2010\u003c\/li\u003e\n\u003cli\u003e335i E93 Convertible 2011-2013\u003c\/li\u003e\n\u003cli\u003e335i \u0026amp; xDrive E92 Coupe 2007-2010\u003c\/li\u003e\n\u003cli\u003e335i \u0026amp; xDrive E90 Sedan 2007-2010\u003c\/li\u003e\n\u003cli\u003e335i \u0026amp; xDrive E92 Coupe 2011-2013\u003c\/li\u003e\n\u003cli\u003e335i \u0026amp; xDrive E90 Sedan 2011\u003c\/li\u003e\n\u003cli\u003e335is E92 Coupe 2011-2013\u003c\/li\u003e\n\u003cli\u003e335is E93 Convertible 2011-2013\u003c\/li\u003e\n\u003cli\u003e525i E60  2004-2007\u003c\/li\u003e\n\u003cli\u003e525i E34  1991-1995\u003c\/li\u003e\n\u003cli\u003e525i E34  1989-1990\u003c\/li\u003e\n\u003cli\u003e525i \u0026amp; Sport Wagon E39  2001-2003\u003c\/li\u003e\n\u003cli\u003e528i \u0026amp; Sport Wagon E39  1997-2000\u003c\/li\u003e\n\u003cli\u003e528i \u0026amp; xi E60  2008-2010\u003c\/li\u003e\n\u003cli\u003e530i E60  2004-2007\u003c\/li\u003e\n\u003cli\u003e530i E39  2001-2003\u003c\/li\u003e\n\u003cli\u003e530i E34  1993-1995\u003c\/li\u003e\n\u003cli\u003e535i E34  1989-1993\u003c\/li\u003e\n\u003cli\u003e535i \u0026amp; xi E60  2008-2010\u003c\/li\u003e\n\u003cli\u003e540i E34  1993-1995\u003c\/li\u003e\n\u003cli\u003e540i \u0026amp; Sport Wagon E39  1997-2003\u003c\/li\u003e\n\u003cli\u003e545i E60  2004-2005\u003c\/li\u003e\n\u003cli\u003e550i E60  2006-2010\u003c\/li\u003e\n\u003cli\u003e645Ci E63 Coupe 2004-2005\u003c\/li\u003e\n\u003cli\u003e645Ci E64 Convertible 2004-2005\u003c\/li\u003e\n\u003cli\u003e650i E64 Convertible 2006-2010\u003c\/li\u003e\n\u003cli\u003e650i E63 Coupe 2006-2010\u003c\/li\u003e\n\u003cli\u003eM3 E90 Sedan 2008-2011\u003c\/li\u003e\n\u003cli\u003eM3 E92 Coupe 2008-2013\u003c\/li\u003e\n\u003cli\u003eM3 E93 Convertible 2008-2013\u003c\/li\u003e\n\u003cli\u003eM3 E46  2001-2006\u003c\/li\u003e\n\u003cli\u003eM3 E36  1996-1999\u003c\/li\u003e\n\u003cli\u003eM3 E36  1995\u003c\/li\u003e\n\u003cli\u003eM5 E60  2006-2010\u003c\/li\u003e\n\u003cli\u003eM5 E39  2000-2003\u003c\/li\u003e\n\u003cli\u003eM6 E63 Coupe 2006-2010\u003c\/li\u003e\n\u003cli\u003eM6 E64 Convertible 2007-2010\u003c\/li\u003e\n\u003cli\u003eX3 2.5i E83  2004-2006\u003c\/li\u003e\n\u003cli\u003eX3 3.0i E83  2004-2006\u003c\/li\u003e\n\u003cli\u003eX5 3.0i E53  2001-2006\u003c\/li\u003e\n\u003cli\u003eZ3 2.3 E36\/7 ROADSTER 1999-2000\u003c\/li\u003e\n\u003cli\u003eZ3 2.5 E36\/7 ROADSTER 2001-2003\u003c\/li\u003e\n\u003cli\u003eZ3 2.8 E36\/7 ROADSTER 1996-2000\u003c\/li\u003e\n\u003cli\u003eZ3 2.8 E36\/7 ROADSTER 1996-2000\u003c\/li\u003e\n\u003cli\u003eZ3 3.0 E36\/7 ROADSTER 2001-2002\u003c\/li\u003e\n\u003cli\u003eZ3 3.0 E36\/7 ROADSTER 2001-2002\u003c\/li\u003e\n\u003cli\u003eZ3 M E36\/7 ROADSTER 2001-2002\u003c\/li\u003e\n\u003cli\u003eZ3 M E36\/7 ROADSTER 2001-2002\u003c\/li\u003e\n\u003cli\u003eZ3 M E36\/7 ROADSTER 1998-2000\u003c\/li\u003e\n\u003cli\u003eZ3 M E36\/7 ROADSTER 1998-2000\u003c\/li\u003e\n\u003cli\u003eZ4 2.5 E85  2003-2006\u003c\/li\u003e\n\u003cli\u003eZ4 3.0 E85  2003-2008\u003c\/li\u003e\n\u003cli\u003eZ4 M E86 Coupe 2006-2008\u003c\/li\u003e\n\u003cli\u003eZ4 M E85 ROADSTER 2006-2008\u003c\/li\u003e\n\u003cli\u003eZ8 E52  2000-2003\u003c\/li\u003e\n\u003cli\u003e1M E82  2011\u003c\/li\u003e\n\u003cli\u003e335i \u0026amp; xDrive F30 Sedan 2012-2015\u003c\/li\u003e\n\u003cli\u003e328i \u0026amp; xDrive F30 Sedan 2012-2016\u003c\/li\u003e\n\u003cli\u003eM5 F10 Sedan 2012-2016\u003c\/li\u003e\n\u003cli\u003e135is E82 Coupe 2013\u003c\/li\u003e\n\u003cli\u003e320i \u0026amp; xDrive F30 Sedan 2013-2017\u003c\/li\u003e\n\u003cli\u003e428i \u0026amp; xDrive F32 Coupe 2014-2016\u003c\/li\u003e\n\u003cli\u003e435i \u0026amp; xDrive F32 Coupe 2014-2016\u003c\/li\u003e\n\u003cli\u003e535i \u0026amp; xDrive F10 Sedan 2011-2016\u003c\/li\u003e\n\u003cli\u003e550i \u0026amp; xDrive F10 Sedan 2011-2013\u003c\/li\u003e\n\u003cli\u003e650i \u0026amp; xDrive F13 Coupe 2013-2017\u003c\/li\u003e\n\u003cli\u003e650i \u0026amp; xDrive F12 Convertible 2013-2017\u003c\/li\u003e\n\u003cli\u003eM6 F06 Gran Coupe 2013-2017\u003c\/li\u003e\n\u003cli\u003eM6 F13 Coupe 2012-2017\u003c\/li\u003e\n\u003cli\u003eM6 F12 Convertible 2012-2017\u003c\/li\u003e\n\u003cli\u003eM235i \u0026amp; xDrive F22 Coupe 2014-2016\u003c\/li\u003e\n\u003cli\u003eM3 F80 Sedan 2015-2017\u003c\/li\u003e\n\u003cli\u003eM4 F82 Coupe 2015-2017\u003c\/li\u003e\n\u003cli\u003eM4 F83 Convertible 2015-2017\u003c\/li\u003e\n\u003cli\u003e428i \u0026amp; xDrive F33 Convertible 2014-2016\u003c\/li\u003e\n\u003cli\u003e428i \u0026amp; xDrive F36 Gran Coupe 2014-2016\u003c\/li\u003e\n\u003cli\u003e435i \u0026amp; xDrive F33 Convertible 2014-2016\u003c\/li\u003e\n\u003cli\u003e435i \u0026amp; xDrive F36 Gran Coupe 2014-2016\u003c\/li\u003e\n\u003cli\u003e328i xDrive F31 Wagon 2014-2016\u003c\/li\u003e\n\u003cli\u003e335i xDrive F34 GT 2014-2016\u003c\/li\u003e\n\u003cli\u003e328i xDrive F34 GT 2014-2016\u003c\/li\u003e\n\u003cli\u003eM235i \u0026amp; xDrive F23 Convertible 2015-2016\u003c\/li\u003e\n\u003cli\u003e340i \u0026amp; xDrive F30 Sedan 2016-2017\u003c\/li\u003e\n\u003cli\u003eM2 F87 Coupe 2016-2017\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31899151499337,"sku":"DIN D700-0000","price":320.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-Alumnium-Pedal-Cover-Set-Multiple-BMW-Fitments-D700-0000.jpg?v=1744460253"},{"product_id":"dinan-alumnium-pedal-cover-set-multiple-bmw-fitments-d700-0002","title":"Dinan Alumnium Pedal Cover Set | Multiple BMW Fitments (D700-0002)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eDinan Alumnium Pedal Cover Set\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eStylish aluminum and rubber pedal pads add a great high performance look to the interior of your BMW, while providing plenty of grip for even slippery leather soles.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe pedal pads feature the Dinan logo and come complete with hardware for a simple installation. Available for Manual, Automatic ,SMG and DCT equipped cars.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e325i \u0026amp; Ci, xi, Conv., Wagon E46  2001-2006\u003c\/li\u003e\n\u003cli\u003e330i \u0026amp; Ci, xi, Conv., ZHP E46  2001-2006\u003c\/li\u003e\n\u003cli\u003e550i \u0026amp; xDrive F10 Sedan 2011-2013\u003c\/li\u003e\n\u003cli\u003e640i \u0026amp; xDrive F12 Convertible 2012-2017\u003c\/li\u003e\n\u003cli\u003e640i \u0026amp; xDrive F13 Coupe 2012-2017\u003c\/li\u003e\n\u003cli\u003e650i \u0026amp; xDrive F13  2012\u003c\/li\u003e\n\u003cli\u003e650i Convertible F12  2012\u003c\/li\u003e\n\u003cli\u003e740i \u0026amp; Li F01\/F02 Sedan 2013-2015\u003c\/li\u003e\n\u003cli\u003e750 Li \u0026amp; xDrive F02 Sedan 2009-2012\u003c\/li\u003e\n\u003cli\u003e750i \u0026amp; xDrive F01 Sedan 2009-2012\u003c\/li\u003e\n\u003cli\u003eAlpina B7 \u0026amp; L, X F01\/F02  2011-2012\u003c\/li\u003e\n\u003cli\u003eM3 E46  2001-2006\u003c\/li\u003e\n\u003cli\u003eM3 E90 Sedan 2008-2011\u003c\/li\u003e\n\u003cli\u003eM3 E92 Coupe 2008-2013\u003c\/li\u003e\n\u003cli\u003eM3 E93 Convertible 2008-2013\u003c\/li\u003e\n\u003cli\u003eM5 E60  2006-2010\u003c\/li\u003e\n\u003cli\u003eM6 E63 Coupe 2006-2010\u003c\/li\u003e\n\u003cli\u003eM6 E64 Convertible 2007-2010\u003c\/li\u003e\n\u003cli\u003eZ4 3.0 E85  2003-2008\u003c\/li\u003e\n\u003cli\u003eM5 F10 Sedan 2012-2016\u003c\/li\u003e\n\u003cli\u003eM6 F12 Convertible 2012-2017\u003c\/li\u003e\n\u003cli\u003eM6 F13 Coupe 2012-2017\u003c\/li\u003e\n\u003cli\u003eM6 F06 Gran Coupe 2013-2017\u003c\/li\u003e\n\u003cli\u003e550i \u0026amp; xDrive F10 Sedan 2014-2016\u003c\/li\u003e\n\u003cli\u003eM3 F80 Sedan 2015-2017\u003c\/li\u003e\n\u003cli\u003eM4 F82 Coupe 2015-2017\u003c\/li\u003e\n\u003cli\u003eM4 F83 Convertible 2015-2017\u003c\/li\u003e\n\u003cli\u003eM2 F87 Coupe 2016-2017\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31899173257289,"sku":"DIN D700-0002","price":239.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-Alumnium-Pedal-Cover-Set-Multiple-BMW-Fitments-D700-0002.jpg?v=1744461239"},{"product_id":"dinan-high-performance-air-to-water-intercoolers-multiple-bmw-fitments-d330-0021","title":"Dinan High Performance Air-to-Water Intercoolers | Multiple BMW Fitments (D330-0021)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eDinan High Performance Air-to-Water Intercoolers\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eMore power, great looks, more consistent performance and no downside by upgrading to the Dinan High Performance Intercoolers. Heat is the enemy of horsepower, beat it by replacing the air-to-water intercoolers with larger units from Dinan to reduce the charge air temperature. Add impressive horsepower when used with Dinan Intercooler Performance Software. This additional cooling is even more important in hot climates where the inherent power loss is much higher.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe two intercoolers are beautiful and purposeful looking, wrapped in black powdercoat and laser engraved with the Dinan logo.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe carbon fiber air box lids are both functional and a handsome addition to the engine compartment. The weave perfectly matches the Dinan front strut tower brace for a very tasteful high performance look.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReplaces factory air-to-water intercoolers with larger units.\u003c\/li\u003e\n\u003cli\u003eBlack powder coated and laser engraved intercoolers.\u003c\/li\u003e\n\u003cli\u003eIncludes silicone hoses, coolant lines, mounting brackets and hardware.\u003c\/li\u003e\n\u003cli\u003eMaximum gain when used together with Dinan Software Upgrade.\u003c\/li\u003e\n\u003cli\u003eCompletely Sealed\u003c\/li\u003e\n\u003cli\u003eCarbon Fiber\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2012-2015 BMW 335I ALL\u003c\/li\u003e\n\u003cli\u003e2012-2016 BMW 328I ALL\u003c\/li\u003e\n\u003cli\u003e2013-2015 BMW 335I XDRIVE ALL\u003c\/li\u003e\n\u003cli\u003e2013-2016 BMW 328I XDRIVE ALL\u003c\/li\u003e\n\u003cli\u003e2014-2016 BMW 228I ALL\u003c\/li\u003e\n\u003cli\u003e2014-2016 BMW 328I GT XDRIVE ALL\u003c\/li\u003e\n\u003cli\u003e2014-2016 BMW 328I XDRIVE ALL\u003c\/li\u003e\n\u003cli\u003e2014-2016 BMW 335I GT XDRIVE ALL\u003c\/li\u003e\n\u003cli\u003e2014-2016 BMW 428I ALL\u003c\/li\u003e\n\u003cli\u003e2014-2016 BMW 428I XDRIVE ALL\u003c\/li\u003e\n\u003cli\u003e2014-2016 BMW 435I ALL\u003c\/li\u003e\n\u003cli\u003e2014-2016 BMW 435I XDRIVE ALL\u003c\/li\u003e\n\u003cli\u003e2015-2016 BMW 228I ALL\u003c\/li\u003e\n\u003cli\u003e2015-2016 BMW 228I XDRIVE ALL\u003c\/li\u003e\n\u003cli\u003e2015-2016 BMW 428I GRAN COUPE ALL\u003c\/li\u003e\n\u003cli\u003e2015-2016 BMW 428I XDRIVE GRAN COUPE ALL\u003c\/li\u003e\n\u003cli\u003e2015-2016 BMW 435I GRAN COUPE ALL\u003c\/li\u003e\n\u003cli\u003e2015-2016 BMW 435I XDRIVE GRAN COUPE ALL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31912503083081,"sku":"DIN D330-0021","price":1600.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-High-Performance-Air-to-Water-Intercoolers-Multiple-BMW-Fitments-D330-0021.jpg?v=1744465785"},{"product_id":"dinan-high-performance-air-to-water-intercoolers-multiple-bmw-fitments-d330-0016","title":"Dinan High Performance Air-to-Water Intercoolers | Multiple BMW Fitments (D330-0016)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eDinan High Performance Air-to-Water Intercoolers\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eMore power, great looks, more consistent performance and no downside by upgrading to the Dinan High Performance Intercoolers. Heat is the enemy of horsepower, beat it by replacing the air-to-water intercoolers with larger units from Dinan to reduce the charge air temperature. Add impressive horsepower when used with Dinan Intercooler Performance Software. This additional cooling is even more important in hot climates where the inherent power loss is much higher.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe two intercoolers are beautiful and purposeful looking, wrapped in black powdercoat and laser engraved with the Dinan logo.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe carbon fiber air box lids are both functional and a handsome addition to the engine compartment. The weave perfectly matches the Dinan front strut tower brace for a very tasteful high performance look.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReplaces factory air-to-water intercoolers with larger units.\u003c\/li\u003e\n\u003cli\u003eBlack powder coated and laser engraved intercoolers.\u003c\/li\u003e\n\u003cli\u003eIncludes silicone hoses, coolant lines, mounting brackets and hardware.\u003c\/li\u003e\n\u003cli\u003eMaximum gain when used together with Dinan Software Upgrade.\u003c\/li\u003e\n\u003cli\u003eCompletely Sealed\u003c\/li\u003e\n\u003cli\u003eCarbon Fiber\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2008-2014 BMW X6 XDRIVE50I\u003c\/li\u003e\n\u003cli\u003e2011-2013 BMW X5 XDRIVE50I\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31912517468233,"sku":"DIN D330-0016","price":4721.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-High-Performance-Air-to-Water-Intercoolers-Multiple-BMW-Fitments-D330-0016.jpg?v=1744466491"},{"product_id":"dinan-high-performance-air-to-water-intercoolers-multiple-bmw-fitments-d330-0014","title":"Dinan High Performance Air-to-Water Intercoolers | Multiple BMW Fitments (D330-0014)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eDinan High Performance Air-to-Water Intercoolers\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eMore power, great looks, more consistent performance and no downside by upgrading to the Dinan High Performance Intercoolers. Heat is the enemy of horsepower, beat it by replacing the air-to-water intercoolers with larger units from Dinan to reduce the charge air temperature. Add impressive horsepower when used with Dinan Intercooler Performance Software. This additional cooling is even more important in hot climates where the inherent power loss is much higher.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe two intercoolers are beautiful and purposeful looking, wrapped in black powdercoat and laser engraved with the Dinan logo.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe carbon fiber air box lids are both functional and a handsome addition to the engine compartment. The weave perfectly matches the Dinan front strut tower brace for a very tasteful high performance look.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReplaces factory air-to-water intercoolers with larger units.\u003c\/li\u003e\n\u003cli\u003eBlack powder coated and laser engraved intercoolers.\u003c\/li\u003e\n\u003cli\u003eIncludes silicone hoses, coolant lines, mounting brackets and hardware.\u003c\/li\u003e\n\u003cli\u003eMaximum gain when used together with Dinan Software Upgrade.\u003c\/li\u003e\n\u003cli\u003eCompletely Sealed\u003c\/li\u003e\n\u003cli\u003eCarbon Fiber\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2009-2012 BMW 750I ALL\u003c\/li\u003e\n\u003cli\u003e2009-2012 BMW 750LI ALL\u003c\/li\u003e\n\u003cli\u003e2010-2012 BMW 550I GT ALL\u003c\/li\u003e\n\u003cli\u003e2010-2012 BMW 550I GT XDRIVE ALL\u003c\/li\u003e\n\u003cli\u003e2010-2012 BMW 750I XDRIVE ALL\u003c\/li\u003e\n\u003cli\u003e2010-2012 BMW 750LI XDRIVE ALL\u003c\/li\u003e\n\u003cli\u003e2011-2013 BMW 550I ALL\u003c\/li\u003e\n\u003cli\u003e2011-2013 BMW 550I XDRIVE ALL\u003c\/li\u003e\n\u003cli\u003e2012 BMW 650I ALL\u003c\/li\u003e\n\u003cli\u003e2012 BMW 650I XDRIVE ALL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31912517501001,"sku":"DIN D330-0014","price":4721.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-High-Performance-Air-to-Water-Intercoolers-Multiple-BMW-Fitments-D330-0014.jpg?v=1744466493"},{"product_id":"dinan-high-performance-air-to-water-intercoolers-multiple-bmw-fitments-d330-0017","title":"Dinan High Performance Air-to-Water Intercoolers | Multiple BMW Fitments (D330-0017)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eDinan High Performance Air-to-Water Intercoolers\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eMore power, great looks, more consistent performance and no downside by upgrading to the Dinan High Performance Intercoolers. Heat is the enemy of horsepower, beat it by replacing the air-to-water intercoolers with larger units from Dinan to reduce the charge air temperature. Add impressive horsepower when used with Dinan Intercooler Performance Software. This additional cooling is even more important in hot climates where the inherent power loss is much higher.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe two intercoolers are beautiful and purposeful looking, wrapped in black powdercoat and laser engraved with the Dinan logo.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe carbon fiber air box lids are both functional and a handsome addition to the engine compartment. The weave perfectly matches the Dinan front strut tower brace for a very tasteful high performance look.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReplaces factory air-to-water intercoolers with larger units.\u003c\/li\u003e\n\u003cli\u003eBlack powder coated and laser engraved intercoolers.\u003c\/li\u003e\n\u003cli\u003eIncludes silicone hoses, coolant lines, mounting brackets and hardware.\u003c\/li\u003e\n\u003cli\u003eMaximum gain when used together with Dinan Software Upgrade.\u003c\/li\u003e\n\u003cli\u003eCompletely Sealed\u003c\/li\u003e\n\u003cli\u003eCarbon Fiber\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2013-2015 BMW 550I GT ALL\u003c\/li\u003e\n\u003cli\u003e2013-2015 BMW 550I GT XDRIVE ALL\u003c\/li\u003e\n\u003cli\u003e2013-2015 BMW 650I ALL\u003c\/li\u003e\n\u003cli\u003e2013-2015 BMW 650I GRAN COUPE ALL\u003c\/li\u003e\n\u003cli\u003e2013-2015 BMW 650I XDRIVE ALL\u003c\/li\u003e\n\u003cli\u003e2013-2015 BMW 650I XDRIVE GRAN COUPE ALL\u003c\/li\u003e\n\u003cli\u003e2013-2015 BMW 750I ALL\u003c\/li\u003e\n\u003cli\u003e2013-2015 BMW 750I XDRIVE ALL\u003c\/li\u003e\n\u003cli\u003e2013-2015 BMW 750LI ALL\u003c\/li\u003e\n\u003cli\u003e2013-2015 BMW 750LI XDRIVE ALL\u003c\/li\u003e\n\u003cli\u003e2014-2015 BMW 550I ALL\u003c\/li\u003e\n\u003cli\u003e2014-2015 BMW 550I XDRIVE ALL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31912517533769,"sku":"DIN D330-0017","price":4721.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-High-Performance-Air-to-Water-Intercoolers-Multiple-BMW-Fitments-D330-0017.jpg?v=1744466495"},{"product_id":"dinan-high-performance-intercooler-multiple-bmw-fitments-d330-0009b","title":"Dinan High Performance Intercooler | Multiple BMW Fitments (D330-0009B)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eDinan High Performance Intercooler\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eGreater power gains are achieved with a larger high performance intercooler. The Dinan intercooler provides an increase in total volume, substantially reducing the pressure drop by 0.7 psi, as well as providing more efficient heat exchange. “Cool down” time is also reduced, enabling the cars to produce full power under varying driving conditions such as stop and go traffic. The system has been engineered as a direct replacement for the stock unit, requiring only minor modifications for a clean, factory-like installation. The intercooler also features larger connector tubing and custom shrouding for maximum efficiency. The improved thermal efficiency will also enhance turbocharger reliability. The intercooler may also be used in conjunction with the Dinan oil cooler and Stage 3 Engine Software with increased boost pressure to take advantage of the improved intercooler efficiency.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe stock air filter housings are replaced with Dinan’s larger volume units that have been designed to accommodate oval shaped filters, providing greater surface area for superior flow. The intake enclosures also include the activated carbon absorption material, providing the same function as the stock configuration without the significant restriction to air flow. The Dinan air boxes are completely sealed enclosures, virtually eliminating the pressure drop measured with the stock units. The sealed enclosures also insulate against power-robbing heated air under the hood for maximum power output.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2007-2008 BMW 335XI ALL\u003c\/li\u003e\n\u003cli\u003e2007-2010 BMW 335I ALL\u003c\/li\u003e\n\u003cli\u003e2009-2010 BMW 335I XDRIVE ALL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31912517566537,"sku":"DIN D330-0009B","price":1920.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-High-Performance-Intercooler-Multiple-BMW-Fitments-D330-0009B.jpg?v=1744466497"},{"product_id":"dinan-high-performance-intercooler-multiple-bmw-fitments-d330-0010b","title":"Dinan High Performance Intercooler | Multiple BMW Fitments (D330-0010B)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eDinan High Performance Intercooler\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eGreater power gains are achieved with a larger high performance intercooler. The Dinan intercooler provides an increase in total volume, substantially reducing the pressure drop by 0.7 psi, as well as providing more efficient heat exchange. “Cool down” time is also reduced, enabling the cars to produce full power under varying driving conditions such as stop and go traffic. The system has been engineered as a direct replacement for the stock unit, requiring only minor modifications for a clean, factory-like installation. The intercooler also features larger connector tubing and custom shrouding for maximum efficiency. The improved thermal efficiency will also enhance turbocharger reliability. The intercooler may also be used in conjunction with the Dinan oil cooler and Stage 3 Engine Software with increased boost pressure to take advantage of the improved intercooler efficiency.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe stock air filter housings are replaced with Dinan’s larger volume units that have been designed to accommodate oval shaped filters, providing greater surface area for superior flow. The intake enclosures also include the activated carbon absorption material, providing the same function as the stock configuration without the significant restriction to air flow. The Dinan air boxes are completely sealed enclosures, virtually eliminating the pressure drop measured with the stock units. The sealed enclosures also insulate against power-robbing heated air under the hood for maximum power output.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2008-2013 BMW 135I ALL\u003c\/li\u003e\n\u003cli\u003e2011 BMW 1 SERIES M ALL\u003c\/li\u003e\n\u003cli\u003e2013 BMW 135IS ALL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31912517599305,"sku":"DIN D330-0010B","price":1920.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-High-Performance-Intercooler-Multiple-BMW-Fitments-D330-0010B.jpg?v=1744466498"},{"product_id":"dinan-high-performance-intercooler-multiple-bmw-fitments-d330-0012","title":"Dinan High Performance Intercooler | Multiple BMW Fitments (D330-0012)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eDinan High Performance Intercooler\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eGreater power gains are achieved with a larger high performance intercooler. The Dinan intercooler provides an increase in total volume, substantially reducing the pressure drop by 0.7 psi, as well as providing more efficient heat exchange. “Cool down” time is also reduced, enabling the cars to produce full power under varying driving conditions such as stop and go traffic. The system has been engineered as a direct replacement for the stock unit, requiring only minor modifications for a clean, factory-like installation. The intercooler also features larger connector tubing and custom shrouding for maximum efficiency. The improved thermal efficiency will also enhance turbocharger reliability. The intercooler may also be used in conjunction with the Dinan oil cooler and Stage 3 Engine Software with increased boost pressure to take advantage of the improved intercooler efficiency.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe stock air filter housings are replaced with Dinan’s larger volume units that have been designed to accommodate oval shaped filters, providing greater surface area for superior flow. The intake enclosures also include the activated carbon absorption material, providing the same function as the stock configuration without the significant restriction to air flow. The Dinan air boxes are completely sealed enclosures, virtually eliminating the pressure drop measured with the stock units. The sealed enclosures also insulate against power-robbing heated air under the hood for maximum power output.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e2011-2013 BMW 335I ALL\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31912517763145,"sku":"DIN D330-0012","price":1920.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-High-Performance-Intercooler-Multiple-BMW-Fitments-D330-0012.jpg?v=1744466513"},{"product_id":"dinan-high-performance-intercooler-multiple-bmw-fitments-d330-0013","title":"Dinan High Performance Intercooler | Multiple BMW Fitments (D330-0013)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eDinan High Performance Intercooler\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eGreater power gains are achieved with a larger high performance intercooler. The Dinan intercooler provides an increase in total volume, substantially reducing the pressure drop by 0.7 psi, as well as providing more efficient heat exchange. “Cool down” time is also reduced, enabling the cars to produce full power under varying driving conditions such as stop and go traffic. The system has been engineered as a direct replacement for the stock unit, requiring only minor modifications for a clean, factory-like installation. The intercooler also features larger connector tubing and custom shrouding for maximum efficiency. The improved thermal efficiency will also enhance turbocharger reliability. The intercooler may also be used in conjunction with the Dinan oil cooler and Stage 3 Engine Software with increased boost pressure to take advantage of the improved intercooler efficiency.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe stock air filter housings are replaced with Dinan’s larger volume units that have been designed to accommodate oval shaped filters, providing greater surface area for superior flow. The intake enclosures also include the activated carbon absorption material, providing the same function as the stock configuration without the significant restriction to air flow. The Dinan air boxes are completely sealed enclosures, virtually eliminating the pressure drop measured with the stock units. The sealed enclosures also insulate against power-robbing heated air under the hood for maximum power output.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2007-2008 BMW 335XI ALL\u003c\/li\u003e\n\u003cli\u003e2007-2010 BMW 335I ALL\u003c\/li\u003e\n\u003cli\u003e2009-2010 BMW 335I XDRIVE ALL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31912517861449,"sku":"DIN D330-0013","price":1920.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-High-Performance-Intercooler-Multiple-BMW-Fitments-D330-0013.jpg?v=1744466515"},{"product_id":"dinan-high-performance-intercooler-multiple-bmw-fitments-d330-0015","title":"Dinan High Performance Intercooler | Multiple BMW Fitments (D330-0015)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eDinan High Performance Intercooler\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eGreater power gains are achieved with a larger high performance intercooler. The Dinan intercooler provides an increase in total volume, substantially reducing the pressure drop by 0.7 psi, as well as providing more efficient heat exchange. “Cool down” time is also reduced, enabling the cars to produce full power under varying driving conditions such as stop and go traffic. The system has been engineered as a direct replacement for the stock unit, requiring only minor modifications for a clean, factory-like installation. The intercooler also features larger connector tubing and custom shrouding for maximum efficiency. The improved thermal efficiency will also enhance turbocharger reliability. The intercooler may also be used in conjunction with the Dinan oil cooler and Stage 3 Engine Software with increased boost pressure to take advantage of the improved intercooler efficiency.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe stock air filter housings are replaced with Dinan’s larger volume units that have been designed to accommodate oval shaped filters, providing greater surface area for superior flow. The intake enclosures also include the activated carbon absorption material, providing the same function as the stock configuration without the significant restriction to air flow. The Dinan air boxes are completely sealed enclosures, virtually eliminating the pressure drop measured with the stock units. The sealed enclosures also insulate against power-robbing heated air under the hood for maximum power output.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2011 BMW 335I ALL\u003c\/li\u003e\n\u003cli\u003e2011 BMW 335I XDRIVE ALL\u003c\/li\u003e\n\u003cli\u003e2011-2013 BMW 335I ALL\u003c\/li\u003e\n\u003cli\u003e2011-2013 BMW 335I XDRIVE ALL\u003c\/li\u003e\n\u003cli\u003e2011-2013 BMW 335IS ALL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31912517992521,"sku":"DIN D330-0015","price":1920.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-High-Performance-Intercooler-Multiple-BMW-Fitments-D330-0015.jpg?v=1744466520"},{"product_id":"dinan-carbon-fiber-air-intake-multiple-bmw-fitments-d760-0030","title":"Dinan Carbon Fiber Air Intake | Multiple BMW Fitments (D760-0030)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eDinan Carbon Fiber Air Intake\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe Dinan high flow carbon fiber cold air intake, like most Dinan products, has a sleek and functional appearance that embodies high performance. The Dinan Carbon Fiber Air Intake allows cool outside air to be pushed into the engine via a pair of supplemental carbon fiber intake ducts located at the front of the engine bay. The Dinan Carbon Fiber Air Intake System was carefully designed within tight packaging constraints and in consideration of ideal aerodynamic diffusing angles to optimize the efficiency and performance of this induction system. Each duct leads combustion air through a custom designed intake assembly that has a larger than stock metered air flow housing, as well as a Dinan conical air filter with a larger capacity.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eDinan engineers have painstakingly developed custom tooling to ensure the entire Dinan cold air intake system is sealed like a factory replacement, thereby preventing hot air from the engine compartment to compromise its effectiveness. The stock air inlets are left intact and fully functional to provide a new total of four air intakes into the engine for maximum airflow. Improved induction airflow offered by Dinan cold air intake systems increase engine performance, even more so if used in combination with other performance enhancing Dinan products.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThis product is not legal for sale or use in California, or states that have adopted California emissions standards, on any pollution controlled motor vehicles.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDinan proprietary Injection molded Dinan MAF housings are larger than stock\u003c\/li\u003e\n\u003cli\u003eStock air filters are replaced with larger Dinan conical air filters.\u003c\/li\u003e\n\u003cli\u003eEntire Dinan Intake system is sealed like a factory replacement to ensure only cold outside air and not hot air from the engine compartment is being utilized.\u003c\/li\u003e\n\u003cli\u003eStock System Stays Completely Functional\u003c\/li\u003e\n\u003cli\u003eCarbon fiber air box lids and intake ducts\u003c\/li\u003e\n\u003cli\u003eRaised Dinan logos are laminated into the carbon fiber intake\u003c\/li\u003e\n\u003cli\u003eRubber hoses, mounting brackets, \u0026amp; hardware included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2007-2008 BMW 335I ALL\u003c\/li\u003e\n\u003cli\u003e2007-2008 BMW 335XI ALL\u003c\/li\u003e\n\u003cli\u003e2007-2010 BMW 335I ALL\u003c\/li\u003e\n\u003cli\u003e2008-2010 BMW 135I ALL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - Dinan Air Filter\u003c\/li\u003e\n\u003cli\u003e1 - Dinan Air Box\u003c\/li\u003e\n\u003cli\u003e1 - Dinan Intake Tube\u003c\/li\u003e\n\u003cli\u003eCouplers\u003c\/li\u003e\n\u003cli\u003eMounting Brackets and Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer's Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31914655514697,"sku":"DIN D760-0030","price":2081.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-Carbon-Fiber-Air-Intake-Multiple-BMW-Fitments-D760-0030.jpg?v=1744470983"},{"product_id":"dinan-carbon-fiber-air-intake-multiple-bmw-fitments-d760-0038","title":"Dinan Carbon Fiber Air Intake | Multiple BMW Fitments (D760-0038)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eDinan Carbon Fiber Air Intake\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe Dinan high flow carbon fiber cold air intake, like most Dinan products, has a sleek and functional appearance that embodies high performance. The Dinan Carbon Fiber Air Intake allows cool outside air to be pushed into the engine via a pair of supplemental carbon fiber intake ducts located at the front of the engine bay. The Dinan Carbon Fiber Air Intake System was carefully designed within tight packaging constraints and in consideration of ideal aerodynamic diffusing angles to optimize the efficiency and performance of this induction system. Each duct leads combustion air through a custom designed intake assembly that has a larger than stock metered air flow housing, as well as a Dinan conical air filter with a larger capacity.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eDinan engineers have painstakingly developed custom tooling to ensure the entire Dinan cold air intake system is sealed like a factory replacement, thereby preventing hot air from the engine compartment to compromise its effectiveness. The stock air inlets are left intact and fully functional to provide a new total of four air intakes into the engine for maximum airflow. Improved induction airflow offered by Dinan cold air intake systems increase engine performance, even more so if used in combination with other performance enhancing Dinan products.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThis product is not legal for sale or use in California, or states that have adopted California emissions standards, on any pollution controlled motor vehicles.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDinan proprietary Injection molded Dinan MAF housings are larger than stock\u003c\/li\u003e\n\u003cli\u003eStock air filters are replaced with larger Dinan conical air filters.\u003c\/li\u003e\n\u003cli\u003eEntire Dinan Intake system is sealed like a factory replacement to ensure only cold outside air and not hot air from the engine compartment is being utilized.\u003c\/li\u003e\n\u003cli\u003eStock System Stays Completely Functional\u003c\/li\u003e\n\u003cli\u003eCarbon fiber air box lids and intake ducts\u003c\/li\u003e\n\u003cli\u003eRaised Dinan logos are laminated into the carbon fiber intake\u003c\/li\u003e\n\u003cli\u003eRubber hoses, mounting brackets, \u0026amp; hardware included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2012-2015 BMW 335I ALL\u003c\/li\u003e\n\u003cli\u003e2013-2015 BMW 335I XDRIVE ALL\u003c\/li\u003e\n\u003cli\u003e2014-2015 BMW 435I ALL\u003c\/li\u003e\n\u003cli\u003e2014-2015 BMW M235I ALL\u003c\/li\u003e\n\u003cli\u003e2015 BMW 435I GRAN COUPE ALL\u003c\/li\u003e\n\u003cli\u003e2015 BMW M235I XDRIVE ALL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31914655547465,"sku":"DIN D760-0038","price":719.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-Carbon-Fiber-Air-Intake-Multiple-BMW-Fitments-D760-0038.jpg?v=1744470986"},{"product_id":"dinan-intake-system-multiple-bmw-fitments-d760-0011","title":"Dinan Intake System | Multiple BMW Fitments (D760-0011)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eDinan Intake System\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe design goal for the Dinan High Flow Cold Air Intake System was very specific: ensure that the powerful engine is breathing plenty of cool oxygen rich air for maximum performance under varying driving conditions. The system replaces the factory air-boxes with proprietary twin high flow air filters feeding large diameter intake plumbing, carefully designed to minimize air turbulance for maximum intake air flow. The filters are actually relocated outside of the engine compartment, behind the front bumper and below the headlights, insulating the intake from under-hood heat. Additional heat shields are incorporated in order to block the flow of power-robbing hot air passing over the radiator. The system also includes modified fog light trim rings for a ram air effect at speed.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eOngoing development of the intake system revealed an interesting and significant discovery. Based upon exhaustive testing, it was determined that the stock location of the air temperature sensor within the Air Mass Meter was providing the engine management system with an artificially high reading, resulting in reduced power output. The culprit was determined to be ‘’heat soaking’’ of the Air Mass Meter when an adequate flow of air was not passing over it, such as in daily stop and go traffic, producing a reading substantially higher than the actual temperature of the air entering the intake system. BMW’s sophisticated engine management system would then automatically back off timing as a result, reducing available power until such time as the air flow cools the Air Mass Meter down. Therefore, the Dinan intake system includes an air temperature sensor reloaction kit as part of the system, providing the engine management system with a more accurate reading and consistent performance.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe cold air intake is crafted out of high quality black powder coated aluminum engraved with the Dinan logo.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2003-2005 BMW Z4 3.0I\u003c\/li\u003e\n\u003cli\u003e2003-2008 BMW Z4 ALL\u003c\/li\u003e\n\u003cli\u003e2006-2008 BMW Z4 ALL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31914655580233,"sku":"DIN D760-0011","price":320.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-Intake-System-Multiple-BMW-Fitments-D760-0011.jpg?v=1744470988"},{"product_id":"dinan-intake-system-multiple-bmw-fitments-d760-0321a","title":"Dinan Intake System | Multiple BMW Fitments (D760-0321A)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eDinan Intake System\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe design goal for the Dinan High Flow Cold Air Intake System was very specific: ensure that the powerful engine is breathing plenty of cool oxygen rich air for maximum performance under varying driving conditions. The system replaces the factory air-boxes with proprietary twin high flow air filters feeding large diameter intake plumbing, carefully designed to minimize air turbulance for maximum intake air flow. The filters are actually relocated outside of the engine compartment, behind the front bumper and below the headlights, insulating the intake from under-hood heat. Additional heat shields are incorporated in order to block the flow of power-robbing hot air passing over the radiator. The system also includes modified fog light trim rings for a ram air effect at speed.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eOngoing development of the intake system revealed an interesting and significant discovery. Based upon exhaustive testing, it was determined that the stock location of the air temperature sensor within the Air Mass Meter was providing the engine management system with an artificially high reading, resulting in reduced power output. The culprit was determined to be ‘’heat soaking’’ of the Air Mass Meter when an adequate flow of air was not passing over it, such as in daily stop and go traffic, producing a reading substantially higher than the actual temperature of the air entering the intake system. BMW’s sophisticated engine management system would then automatically back off timing as a result, reducing available power until such time as the air flow cools the Air Mass Meter down. Therefore, the Dinan intake system includes an air temperature sensor reloaction kit as part of the system, providing the engine management system with a more accurate reading and consistent performance.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe cold air intake is crafted out of high quality black powder coated aluminum engraved with the Dinan logo.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1996-1999 BMW 328I ALL\u003c\/li\u003e\n\u003cli\u003e1996-1999 BMW M3 ALL\u003c\/li\u003e\n\u003cli\u003e1998-1999 BMW 323I ALL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31914655645769,"sku":"DIN D760-0321A","price":480.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-Intake-System-Multiple-BMW-Fitments-D760-0321A.jpg?v=1744470991"},{"product_id":"dinan-carbon-fiber-air-intake-multiple-bmw-fitments-d760-0028","title":"Dinan Carbon Fiber Air Intake | Multiple BMW Fitments (D760-0028)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eDinan Carbon Fiber Air Intake\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe Dinan high flow carbon fiber cold air intake, like most Dinan products, has a sleek and functional appearance that embodies high performance. The Dinan Carbon Fiber Air Intake allows cool outside air to be pushed into the engine via a pair of supplemental carbon fiber intake ducts located at the front of the engine bay. The Dinan Carbon Fiber Air Intake System was carefully designed within tight packaging constraints and in consideration of ideal aerodynamic diffusing angles to optimize the efficiency and performance of this induction system. Each duct leads combustion air through a custom designed intake assembly that has a larger than stock metered air flow housing, as well as a Dinan conical air filter with a larger capacity.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eDinan engineers have painstakingly developed custom tooling to ensure the entire Dinan cold air intake system is sealed like a factory replacement, thereby preventing hot air from the engine compartment to compromise its effectiveness. The stock air inlets are left intact and fully functional to provide a new total of four air intakes into the engine for maximum airflow. Improved induction airflow offered by Dinan cold air intake systems increase engine performance, even more so if used in combination with other performance enhancing Dinan products.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThis product is not legal for sale or use in California, or states that have adopted California emissions standards, on any pollution controlled motor vehicles.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDinan proprietary Injection molded Dinan MAF housings are larger than stock\u003c\/li\u003e\n\u003cli\u003eStock air filters are replaced with larger Dinan conical air filters.\u003c\/li\u003e\n\u003cli\u003eEntire Dinan Intake system is sealed like a factory replacement to ensure only cold outside air and not hot air from the engine compartment is being utilized.\u003c\/li\u003e\n\u003cli\u003eStock System Stays Completely Functional\u003c\/li\u003e\n\u003cli\u003eCarbon fiber air box lids and intake ducts\u003c\/li\u003e\n\u003cli\u003eRaised Dinan logos are laminated into the carbon fiber intake\u003c\/li\u003e\n\u003cli\u003eRubber hoses, mounting brackets, \u0026amp; hardware included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2008-2011 BMW M3 ALL\u003c\/li\u003e\n\u003cli\u003e2008-2012 BMW M3 ALL\u003c\/li\u003e\n\u003cli\u003e2008-2013 BMW M3 ALL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31914695458889,"sku":"DIN D760-0028","price":1440.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-Carbon-Fiber-Air-Intake-Multiple-BMW-Fitments-D760-0028.jpg?v=1744473845"},{"product_id":"dinan-carbon-fiber-air-intake-multiple-bmw-fitments-d760-0031","title":"Dinan Carbon Fiber Air Intake | Multiple BMW Fitments (D760-0031)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eDinan Carbon Fiber Air Intake\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe Dinan high flow carbon fiber cold air intake, like most Dinan products, has a sleek and functional appearance that embodies high performance. The Dinan Carbon Fiber Air Intake allows cool outside air to be pushed into the engine via a pair of supplemental carbon fiber intake ducts located at the front of the engine bay. The Dinan Carbon Fiber Air Intake System was carefully designed within tight packaging constraints and in consideration of ideal aerodynamic diffusing angles to optimize the efficiency and performance of this induction system. Each duct leads combustion air through a custom designed intake assembly that has a larger than stock metered air flow housing, as well as a Dinan conical air filter with a larger capacity.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eDinan engineers have painstakingly developed custom tooling to ensure the entire Dinan cold air intake system is sealed like a factory replacement, thereby preventing hot air from the engine compartment to compromise its effectiveness. The stock air inlets are left intact and fully functional to provide a new total of four air intakes into the engine for maximum airflow. Improved induction airflow offered by Dinan cold air intake systems increase engine performance, even more so if used in combination with other performance enhancing Dinan products.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThis product is not legal for sale or use in California, or states that have adopted California emissions standards, on any pollution controlled motor vehicles.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDinan proprietary Injection molded Dinan MAF housings are larger than stock\u003c\/li\u003e\n\u003cli\u003eStock air filters are replaced with larger Dinan conical air filters.\u003c\/li\u003e\n\u003cli\u003eEntire Dinan Intake system is sealed like a factory replacement to ensure only cold outside air and not hot air from the engine compartment is being utilized.\u003c\/li\u003e\n\u003cli\u003eStock System Stays Completely Functional\u003c\/li\u003e\n\u003cli\u003eCarbon fiber air box lids and intake ducts\u003c\/li\u003e\n\u003cli\u003eRaised Dinan logos are laminated into the carbon fiber intake\u003c\/li\u003e\n\u003cli\u003eRubber hoses, mounting brackets, \u0026amp; hardware included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e2011-2013 BMW 335IS ALL\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31914695491657,"sku":"DIN D760-0031","price":2401.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-Carbon-Fiber-Air-Intake-Multiple-BMW-Fitments-D760-0031.jpg?v=1744473846"},{"product_id":"dinan-carbon-fiber-air-intake-2012-2015-bmw-m5-d760-0035","title":"Dinan Carbon Fiber Air Intake | 2012 - 2015 BMW M5 (D760-0035)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eDinan Carbon Fiber Air Intake\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe Dinan high flow carbon fiber cold air intake, like most Dinan products, has a sleek and functional appearance that embodies high performance. The Dinan Carbon Fiber Air Intake allows cool outside air to be pushed into the engine via a pair of supplemental carbon fiber intake ducts located at the front of the engine bay. The Dinan Carbon Fiber Air Intake System was carefully designed within tight packaging constraints and in consideration of ideal aerodynamic diffusing angles to optimize the efficiency and performance of this induction system. Each duct leads combustion air through a custom designed intake assembly that has a larger than stock metered air flow housing, as well as a Dinan conical air filter with a larger capacity.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eDinan engineers have painstakingly developed custom tooling to ensure the entire Dinan cold air intake system is sealed like a factory replacement, thereby preventing hot air from the engine compartment to compromise its effectiveness. The stock air inlets are left intact and fully functional to provide a new total of four air intakes into the engine for maximum airflow. Improved induction airflow offered by Dinan cold air intake systems increase engine performance, even more so if used in combination with other performance enhancing Dinan products.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThis product is not legal for sale or use in California, or states that have adopted California emissions standards, on any pollution controlled motor vehicles.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDinan proprietary Injection molded Dinan MAF housings are larger than stock\u003c\/li\u003e\n\u003cli\u003eStock air filters are replaced with larger Dinan conical air filters.\u003c\/li\u003e\n\u003cli\u003eEntire Dinan Intake system is sealed like a factory replacement to ensure only cold outside air and not hot air from the engine compartment is being utilized.\u003c\/li\u003e\n\u003cli\u003eStock System Stays Completely Functional\u003c\/li\u003e\n\u003cli\u003eCarbon fiber air box lids and intake ducts\u003c\/li\u003e\n\u003cli\u003eRaised Dinan logos are laminated into the carbon fiber intake\u003c\/li\u003e\n\u003cli\u003eRubber hoses, mounting brackets, \u0026amp; hardware included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e2012-2015 BMW M5 ALL\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31914695524425,"sku":"DIN D760-0035","price":3521.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-Carbon-Fiber-Air-Intake-2012-2015-BMW-M5-D760-0035.jpg?v=1744473848"},{"product_id":"dinan-carbon-fiber-air-intake-multiple-bmw-fitments-d760-0029","title":"Dinan Carbon Fiber Air Intake | Multiple BMW Fitments (D760-0029)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eDinan Carbon Fiber Air Intake\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe Dinan high flow carbon fiber cold air intake, like most Dinan products, has a sleek and functional appearance that embodies high performance. The Dinan Carbon Fiber Air Intake allows cool outside air to be pushed into the engine via a pair of supplemental carbon fiber intake ducts located at the front of the engine bay. The Dinan Carbon Fiber Air Intake System was carefully designed within tight packaging constraints and in consideration of ideal aerodynamic diffusing angles to optimize the efficiency and performance of this induction system. Each duct leads combustion air through a custom designed intake assembly that has a larger than stock metered air flow housing, as well as a Dinan conical air filter with a larger capacity.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eDinan engineers have painstakingly developed custom tooling to ensure the entire Dinan cold air intake system is sealed like a factory replacement, thereby preventing hot air from the engine compartment to compromise its effectiveness. The stock air inlets are left intact and fully functional to provide a new total of four air intakes into the engine for maximum airflow. Improved induction airflow offered by Dinan cold air intake systems increase engine performance, even more so if used in combination with other performance enhancing Dinan products.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThis product is not legal for sale or use in California, or states that have adopted California emissions standards, on any pollution controlled motor vehicles.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDinan proprietary Injection molded Dinan MAF housings are larger than stock\u003c\/li\u003e\n\u003cli\u003eStock air filters are replaced with larger Dinan conical air filters.\u003c\/li\u003e\n\u003cli\u003eEntire Dinan Intake system is sealed like a factory replacement to ensure only cold outside air and not hot air from the engine compartment is being utilized.\u003c\/li\u003e\n\u003cli\u003eStock System Stays Completely Functional\u003c\/li\u003e\n\u003cli\u003eCarbon fiber air box lids and intake ducts\u003c\/li\u003e\n\u003cli\u003eRaised Dinan logos are laminated into the carbon fiber intake\u003c\/li\u003e\n\u003cli\u003eRubber hoses, mounting brackets, \u0026amp; hardware included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2009-2010 BMW 335I ALL\u003c\/li\u003e\n\u003cli\u003e2009-2010 BMW 335I XDRIVE ALL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31914695557193,"sku":"DIN D760-0029","price":2081.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-Carbon-Fiber-Air-Intake-Multiple-BMW-Fitments-D760-0029.jpg?v=1744473850"},{"product_id":"dinan-carbon-fiber-air-intake-strut-tower-brace-multiple-bmw-fitments-d760-0032","title":"Dinan Carbon Fiber Air Intake \u0026 Strut Tower Brace | Multiple BMW Fitments (D760-0032)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eDinan Carbon Fiber Air Intake \u0026amp; Strut Tower Brace\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe Dinan carbon fiber intake looks as good as it performs, allowing more outside air to be pushed into the engine via twin-ducts while also providing structural stiffness to the strut towers. Two new air inlets are added, each with its own high flow filter mounted into the mouth of the carbon fiber inlet. The stock air inlet is fully functional to provide four intakes into the engine for maximum airflow. The filtered air passes from the inlets into the black powder coated ducts then directly into the engine.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eWith very little room to work with under the hood the team came up with the ingenious idea of combining the shock tower brace and the inlet tube into one part. The results are beautiful and purposeful looking.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThis product is not legal for sale or use in California, or states that have adopted California emissions standards, on any pollution controlled motor vehicles.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMore Power +10 HP \u0026amp; +8 lb-ft of Torque (with Software Upgrade)\u003c\/li\u003e\n\u003cli\u003eBeautiful Dual Carbon Fiber Inlets\u003c\/li\u003e\n\u003cli\u003eIntegrated Strut Tower Brace\u003c\/li\u003e\n\u003cli\u003eStock System Stays Completely Functional\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2011-2013 BMW 550I ALL\u003c\/li\u003e\n\u003cli\u003e2011-2013 BMW 550I XDRIVE ALL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31914695622729,"sku":"DIN D760-0032","price":3521.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-Carbon-Fiber-Air-Intake-Strut-Tower-Brace-Multiple-BMW-Fitments-D760-0032.jpg?v=1744473855"},{"product_id":"dinan-carbon-fiber-air-intake-multiple-bmw-fitments-d760-0037","title":"Dinan Carbon Fiber Air Intake | Multiple BMW Fitments (D760-0037)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eDinan Carbon Fiber Air Intake\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe Dinan high flow carbon fiber cold air intake, like most Dinan products, has a sleek and functional appearance that embodies high performance. The Dinan Carbon Fiber Air Intake allows cool outside air to be pushed into the engine via a pair of supplemental carbon fiber intake ducts located at the front of the engine bay. The Dinan Carbon Fiber Air Intake System was carefully designed within tight packaging constraints and in consideration of ideal aerodynamic diffusing angles to optimize the efficiency and performance of this induction system. Each duct leads combustion air through a custom designed intake assembly that has a larger than stock metered air flow housing, as well as a Dinan conical air filter with a larger capacity.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eDinan engineers have painstakingly developed custom tooling to ensure the entire Dinan cold air intake system is sealed like a factory replacement, thereby preventing hot air from the engine compartment to compromise its effectiveness. The stock air inlets are left intact and fully functional to provide a new total of four air intakes into the engine for maximum airflow. Improved induction airflow offered by Dinan cold air intake systems increase engine performance, even more so if used in combination with other performance enhancing Dinan products.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThis product is not legal for sale or use in California, or states that have adopted California emissions standards, on any pollution controlled motor vehicles.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDinan proprietary Injection molded Dinan MAF housings are larger than stock\u003c\/li\u003e\n\u003cli\u003eStock air filters are replaced with larger Dinan conical air filters.\u003c\/li\u003e\n\u003cli\u003eEntire Dinan Intake system is sealed like a factory replacement to ensure only cold outside air and not hot air from the engine compartment is being utilized.\u003c\/li\u003e\n\u003cli\u003eStock System Stays Completely Functional\u003c\/li\u003e\n\u003cli\u003eCarbon fiber air box lids and intake ducts\u003c\/li\u003e\n\u003cli\u003eRaised Dinan logos are laminated into the carbon fiber intake\u003c\/li\u003e\n\u003cli\u003eRubber hoses, mounting brackets, \u0026amp; hardware included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2012-2015 BMW M6 ALL\u003c\/li\u003e\n\u003cli\u003e2014-2015 BMW M6 GRAN COUPE ALL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31914695655497,"sku":"DIN D760-0037","price":3521.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-Carbon-Fiber-Air-Intake-Multiple-BMW-Fitments-D760-0037.jpg?v=1744473857"},{"product_id":"dinan-carbon-fiber-air-intake-strut-tower-brace-multiple-bmw-fitments-d760-0033","title":"Dinan Carbon Fiber Air Intake \u0026 Strut Tower Brace | Multiple BMW Fitments (D760-0033)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eDinan Carbon Fiber Air Intake \u0026amp; Strut Tower Brace\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe Dinan carbon fiber intake looks as good as it performs, allowing more outside air to be pushed into the engine via twin-ducts while also providing structural stiffness to the strut towers. Two new air inlets are added, each with its own high flow filter mounted into the mouth of the carbon fiber inlet. The stock air inlet is fully functional to provide four intakes into the engine for maximum airflow. The filtered air passes from the inlets into the black powder coated ducts then directly into the engine.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eWith very little room to work with under the hood the team came up with the ingenious idea of combining the shock tower brace and the inlet tube into one part. The results are beautiful and purposeful looking.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThis product is not legal for sale or use in California, or states that have adopted California emissions standards, on any pollution controlled motor vehicles.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMore Power +10 HP \u0026amp; +8 lb-ft of Torque (with Software Upgrade)\u003c\/li\u003e\n\u003cli\u003eBeautiful Dual Carbon Fiber Inlets\u003c\/li\u003e\n\u003cli\u003eIntegrated Strut Tower Brace\u003c\/li\u003e\n\u003cli\u003eStock System Stays Completely Functional\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2009-2012 BMW 750I ALL\u003c\/li\u003e\n\u003cli\u003e2009-2012 BMW 750LI ALL\u003c\/li\u003e\n\u003cli\u003e2010-2012 BMW 750I XDRIVE ALL\u003c\/li\u003e\n\u003cli\u003e2010-2012 BMW 750LI XDRIVE ALL\u003c\/li\u003e\n\u003cli\u003e2011-2012 BMW ALPINA B7 ALL\u003c\/li\u003e\n\u003cli\u003e2011-2012 BMW ALPINA B7 XDRIVE ALL\u003c\/li\u003e\n\u003cli\u003e2011-2012 BMW ALPINA B7L ALL\u003c\/li\u003e\n\u003cli\u003e2011-2012 BMW ALPINA B7L XDRIVE ALL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31914695721033,"sku":"DIN D760-0033","price":3521.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-Carbon-Fiber-Air-Intake-Strut-Tower-Brace-Multiple-BMW-Fitments-D760-0033.jpg?v=1744473859"},{"product_id":"dinan-carbon-fiber-air-intake-multiple-bmw-fitments-d760-0045","title":"Dinan Carbon Fiber Air Intake | Multiple BMW Fitments (D760-0045)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eDinan Carbon Fiber Air Intake\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe Dinan high flow carbon fiber cold air intake, like most Dinan products, has a sleek and functional appearance that embodies high performance. The Dinan Carbon Fiber Air Intake allows cool outside air to be pushed into the engine via a pair of supplemental carbon fiber intake ducts located at the front of the engine bay. The Dinan Carbon Fiber Air Intake System was carefully designed within tight packaging constraints and in consideration of ideal aerodynamic diffusing angles to optimize the efficiency and performance of this induction system. Each duct leads combustion air through a custom designed intake assembly that has a larger than stock metered air flow housing, as well as a Dinan conical air filter with a larger capacity.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eDinan engineers have painstakingly developed custom tooling to ensure the entire Dinan cold air intake system is sealed like a factory replacement, thereby preventing hot air from the engine compartment to compromise its effectiveness. The stock air inlets are left intact and fully functional to provide a new total of four air intakes into the engine for maximum airflow. Improved induction airflow offered by Dinan cold air intake systems increase engine performance, even more so if used in combination with other performance enhancing Dinan products.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThis product is not legal for sale or use in California, or states that have adopted California emissions standards, on any pollution controlled motor vehicles.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDinan proprietary Injection molded Dinan MAF housings are larger than stock\u003c\/li\u003e\n\u003cli\u003eStock air filters are replaced with larger Dinan conical air filters.\u003c\/li\u003e\n\u003cli\u003eEntire Dinan Intake system is sealed like a factory replacement to ensure only cold outside air and not hot air from the engine compartment is being utilized.\u003c\/li\u003e\n\u003cli\u003eStock System Stays Completely Functional\u003c\/li\u003e\n\u003cli\u003eCarbon fiber air box lids and intake ducts\u003c\/li\u003e\n\u003cli\u003eRaised Dinan logos are laminated into the carbon fiber intake\u003c\/li\u003e\n\u003cli\u003eRubber hoses, mounting brackets, \u0026amp; hardware included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2015 BMW M3 ALL\u003c\/li\u003e\n\u003cli\u003e2015 BMW M4 ALL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31914695688265,"sku":"DIN D760-0045","price":2561.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-Carbon-Fiber-Air-Intake-Multiple-BMW-Fitments-D760-0045.jpg?v=1744473861"},{"product_id":"dinan-carbon-fiber-air-intake-strut-tower-brace-multiple-bmw-fitments-d760-0036","title":"Dinan Carbon Fiber Air Intake \u0026 Strut Tower Brace | Multiple BMW Fitments (D760-0036)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eDinan Carbon Fiber Air Intake \u0026amp; Strut Tower Brace\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe Dinan carbon fiber intake looks as good as it performs, allowing more outside air to be pushed into the engine via twin-ducts while also providing structural stiffness to the strut towers. Two new air inlets are added, each with its own high flow filter mounted into the mouth of the carbon fiber inlet. The stock air inlet is fully functional to provide four intakes into the engine for maximum airflow. The filtered air passes from the inlets into the black powder coated ducts then directly into the engine.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eWith very little room to work with under the hood the team came up with the ingenious idea of combining the shock tower brace and the inlet tube into one part. The results are beautiful and purposeful looking.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThis product is not legal for sale or use in California, or states that have adopted California emissions standards, on any pollution controlled motor vehicles.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMore Power +10 HP \u0026amp; +8 lb-ft of Torque (with Software Upgrade)\u003c\/li\u003e\n\u003cli\u003eBeautiful Dual Carbon Fiber Inlets\u003c\/li\u003e\n\u003cli\u003eIntegrated Strut Tower Brace\u003c\/li\u003e\n\u003cli\u003eStock System Stays Completely Functional\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2013-2015 BMW 550I GT ALL\u003c\/li\u003e\n\u003cli\u003e2013-2015 BMW 550I GT XDRIVE ALL\u003c\/li\u003e\n\u003cli\u003e2014-2015 BMW 550I ALL\u003c\/li\u003e\n\u003cli\u003e2014-2015 BMW 550I XDRIVE ALL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31914695753801,"sku":"DIN D760-0036","price":3521.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-Carbon-Fiber-Air-Intake-Strut-Tower-Brace-Multiple-BMW-Fitments-D760-0036.jpg?v=1744473862"},{"product_id":"dinan-carbon-fiber-air-intake-strut-tower-brace-multiple-bmw-fitments-d760-0044","title":"Dinan Carbon Fiber Air Intake \u0026 Strut Tower Brace | Multiple BMW Fitments (D760-0044)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eDinan Carbon Fiber Air Intake \u0026amp; Strut Tower Brace\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe Dinan carbon fiber intake looks as good as it performs, allowing more outside air to be pushed into the engine via twin-ducts while also providing structural stiffness to the strut towers. Two new air inlets are added, each with its own high flow filter mounted into the mouth of the carbon fiber inlet. The stock air inlet is fully functional to provide four intakes into the engine for maximum airflow. The filtered air passes from the inlets into the black powder coated ducts then directly into the engine.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eWith very little room to work with under the hood the team came up with the ingenious idea of combining the shock tower brace and the inlet tube into one part. The results are beautiful and purposeful looking.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThis product is not legal for sale or use in California, or states that have adopted California emissions standards, on any pollution controlled motor vehicles.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMore Power +10 HP \u0026amp; +8 lb-ft of Torque (with Software Upgrade)\u003c\/li\u003e\n\u003cli\u003eBeautiful Dual Carbon Fiber Inlets\u003c\/li\u003e\n\u003cli\u003eIntegrated Strut Tower Brace\u003c\/li\u003e\n\u003cli\u003eStock System Stays Completely Functional\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2013-2015 BMW 750I ALL\u003c\/li\u003e\n\u003cli\u003e2013-2015 BMW 750I XDRIVE ALL\u003c\/li\u003e\n\u003cli\u003e2013-2015 BMW 750LI ALL\u003c\/li\u003e\n\u003cli\u003e2013-2015 BMW 750LI XDRIVE ALL\u003c\/li\u003e\n\u003cli\u003e2013-2015 BMW ALPINA B7 ALL\u003c\/li\u003e\n\u003cli\u003e2013-2015 BMW ALPINA B7 XDRIVE ALL\u003c\/li\u003e\n\u003cli\u003e2013-2015 BMW ALPINA B7L ALL\u003c\/li\u003e\n\u003cli\u003e2013-2015 BMW ALPINA B7L XDRIVE ALL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31914695819337,"sku":"DIN D760-0044","price":3521.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-Carbon-Fiber-Air-Intake-Strut-Tower-Brace-Multiple-BMW-Fitments-D760-0044.jpg?v=1744473864"},{"product_id":"dinan-high-flow-air-mass-meter-intake-assemblies-multiple-bmw-fitments-d763-0044","title":"Dinan High Flow Air Mass Meter\/Intake Assemblies | Multiple BMW Fitments (D763-0044)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eDinan High Flow Air Mass Meter\/Intake Assemblies\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eDinan’s High Flow Air Mass Meter and Intake Assemblies reduce the intake restriction presented by the stock configuration for a better breathing engine. Increasing the flow of cool, oxygen rich air increases power output by 21 horsepower, as well as providing improved throttle response. The Dinan High Flow Air Mass Meters are also included, providing a full 22% increase in air flow.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe stock air filter housings are replaced with Dinan’s larger volume units that have been designed to accommodate oval shaped filters, providing greater surface area for superior flow. The intake enclosures also include the activated carbon absorption material, providing the same function as the stock configuration without the significant restriction to air flow. The Dinan air boxes are completely sealed enclosures, virtually eliminating the pressure drop measured with the stock units. The sealed enclosures also insulate against power-robbing heated air under the hood for maximum power output.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe carbon fiber air box lids are both functional and a handsome addition to the engine compartment. The weave perfectly matches the Dinan front strut tower brace for a very tasteful high performance look.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eImproved Air Flow\u003c\/li\u003e\n\u003cli\u003eCooler Air Into Engine\u003c\/li\u003e\n\u003cli\u003eImproved Throttle Response\u003c\/li\u003e\n\u003cli\u003eLarger Air Filters\u003c\/li\u003e\n\u003cli\u003eCompletely Sealed\u003c\/li\u003e\n\u003cli\u003eCarbon Fiber\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2006-2010 BMW M5 ALL\u003c\/li\u003e\n\u003cli\u003e2006-2010 BMW M6 ALL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31914695786569,"sku":"DIN D763-0044","price":2881.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-High-Flow-Air-Mass-MeterIntake-Assemblies-Multiple-BMW-Fitments-D763-0044.jpg?v=1744473865"},{"product_id":"dinan-intake-system-multiple-bmw-fitments-d760-0002","title":"Dinan Intake System | Multiple BMW Fitments (D760-0002)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eDinan Intake System\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe design goal for the Dinan High Flow Cold Air Intake System was very specific: ensure that the powerful engine is breathing plenty of cool oxygen rich air for maximum performance under varying driving conditions. The system replaces the factory air-boxes with proprietary twin high flow air filters feeding large diameter intake plumbing, carefully designed to minimize air turbulance for maximum intake air flow. The filters are actually relocated outside of the engine compartment, behind the front bumper and below the headlights, insulating the intake from under-hood heat. Additional heat shields are incorporated in order to block the flow of power-robbing hot air passing over the radiator. The system also includes modified fog light trim rings for a ram air effect at speed.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eOngoing development of the intake system revealed an interesting and significant discovery. Based upon exhaustive testing, it was determined that the stock location of the air temperature sensor within the Air Mass Meter was providing the engine management system with an artificially high reading, resulting in reduced power output. The culprit was determined to be ‘’heat soaking’’ of the Air Mass Meter when an adequate flow of air was not passing over it, such as in daily stop and go traffic, producing a reading substantially higher than the actual temperature of the air entering the intake system. BMW’s sophisticated engine management system would then automatically back off timing as a result, reducing available power until such time as the air flow cools the Air Mass Meter down. Therefore, the Dinan intake system includes an air temperature sensor reloaction kit as part of the system, providing the engine management system with a more accurate reading and consistent performance.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe cold air intake is crafted out of high quality black powder coated aluminum engraved with the Dinan logo.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2001-2005 BMW 330I ALL\u003c\/li\u003e\n\u003cli\u003e2001-2005 BMW 330XI ALL\u003c\/li\u003e\n\u003cli\u003e2001-2006 BMW 330CI ALL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31914695852105,"sku":"DIN D760-0002","price":399.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-Intake-System-Multiple-BMW-Fitments-D760-0002.jpg?v=1744473867"},{"product_id":"dinan-intake-system-multiple-bmw-fitments-d760-0012","title":"Dinan Intake System | Multiple BMW Fitments (D760-0012)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eDinan Intake System\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe design goal for the Dinan High Flow Cold Air Intake System was very specific: ensure that the powerful engine is breathing plenty of cool oxygen rich air for maximum performance under varying driving conditions. The system replaces the factory air-boxes with proprietary twin high flow air filters feeding large diameter intake plumbing, carefully designed to minimize air turbulance for maximum intake air flow. The filters are actually relocated outside of the engine compartment, behind the front bumper and below the headlights, insulating the intake from under-hood heat. Additional heat shields are incorporated in order to block the flow of power-robbing hot air passing over the radiator. The system also includes modified fog light trim rings for a ram air effect at speed.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eOngoing development of the intake system revealed an interesting and significant discovery. Based upon exhaustive testing, it was determined that the stock location of the air temperature sensor within the Air Mass Meter was providing the engine management system with an artificially high reading, resulting in reduced power output. The culprit was determined to be ‘’heat soaking’’ of the Air Mass Meter when an adequate flow of air was not passing over it, such as in daily stop and go traffic, producing a reading substantially higher than the actual temperature of the air entering the intake system. BMW’s sophisticated engine management system would then automatically back off timing as a result, reducing available power until such time as the air flow cools the Air Mass Meter down. Therefore, the Dinan intake system includes an air temperature sensor reloaction kit as part of the system, providing the engine management system with a more accurate reading and consistent performance.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe cold air intake is crafted out of high quality black powder coated aluminum engraved with the Dinan logo.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e2006-2010 BMW 550I ALL\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31914695884873,"sku":"DIN D760-0012","price":1600.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-Intake-System-Multiple-BMW-Fitments-D760-0012.jpg?v=1744473868"},{"product_id":"dinan-intake-system-1998-2000-bmw-z3-d760-0323a","title":"Dinan Intake System | 1998 - 2000 BMW Z3 (D760-0323A)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eDinan Intake System\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe design goal for the Dinan High Flow Cold Air Intake System was very specific: ensure that the powerful engine is breathing plenty of cool oxygen rich air for maximum performance under varying driving conditions. The system replaces the factory air-boxes with proprietary twin high flow air filters feeding large diameter intake plumbing, carefully designed to minimize air turbulance for maximum intake air flow. The filters are actually relocated outside of the engine compartment, behind the front bumper and below the headlights, insulating the intake from under-hood heat. Additional heat shields are incorporated in order to block the flow of power-robbing hot air passing over the radiator. The system also includes modified fog light trim rings for a ram air effect at speed.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eOngoing development of the intake system revealed an interesting and significant discovery. Based upon exhaustive testing, it was determined that the stock location of the air temperature sensor within the Air Mass Meter was providing the engine management system with an artificially high reading, resulting in reduced power output. The culprit was determined to be ‘’heat soaking’’ of the Air Mass Meter when an adequate flow of air was not passing over it, such as in daily stop and go traffic, producing a reading substantially higher than the actual temperature of the air entering the intake system. BMW’s sophisticated engine management system would then automatically back off timing as a result, reducing available power until such time as the air flow cools the Air Mass Meter down. Therefore, the Dinan intake system includes an air temperature sensor reloaction kit as part of the system, providing the engine management system with a more accurate reading and consistent performance.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe cold air intake is crafted out of high quality black powder coated aluminum engraved with the Dinan logo.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1998-2000 BMW Z3 M ROADSTER\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31914695917641,"sku":"DIN D760-0323A","price":719.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-Intake-System-1998-2000-BMW-Z3-D760-0323A.jpg?v=1744473870"},{"product_id":"dinan-intake-system-2000-2003-bmw-m5-d760-0390c","title":"Dinan Intake System | 2000 - 2003 BMW M5 (D760-0390C)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eDinan Intake System\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe design goal for the Dinan High Flow Cold Air Intake System was very specific: ensure that the powerful engine is breathing plenty of cool oxygen rich air for maximum performance under varying driving conditions. The system replaces the factory air-boxes with proprietary twin high flow air filters feeding large diameter intake plumbing, carefully designed to minimize air turbulance for maximum intake air flow. The filters are actually relocated outside of the engine compartment, behind the front bumper and below the headlights, insulating the intake from under-hood heat. Additional heat shields are incorporated in order to block the flow of power-robbing hot air passing over the radiator. The system also includes modified fog light trim rings for a ram air effect at speed.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eOngoing development of the intake system revealed an interesting and significant discovery. Based upon exhaustive testing, it was determined that the stock location of the air temperature sensor within the Air Mass Meter was providing the engine management system with an artificially high reading, resulting in reduced power output. The culprit was determined to be ‘’heat soaking’’ of the Air Mass Meter when an adequate flow of air was not passing over it, such as in daily stop and go traffic, producing a reading substantially higher than the actual temperature of the air entering the intake system. BMW’s sophisticated engine management system would then automatically back off timing as a result, reducing available power until such time as the air flow cools the Air Mass Meter down. Therefore, the Dinan intake system includes an air temperature sensor reloaction kit as part of the system, providing the engine management system with a more accurate reading and consistent performance.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe cold air intake is crafted out of high quality black powder coated aluminum engraved with the Dinan logo.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e2000-2003 BMW M5 ALL\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31914695983177,"sku":"DIN D760-0390C","price":1760.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-Intake-System-2000-2003-BMW-M5-D760-0390C.jpg?v=1744473879"},{"product_id":"dinan-intake-system-multiple-bmw-fitments-d760-9000","title":"Dinan Intake System | Multiple BMW Fitments (D760-9000)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eDinan Intake System\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe design goal for the Dinan High Flow Cold Air Intake System was very specific: ensure that the powerful engine is breathing plenty of cool oxygen rich air for maximum performance under varying driving conditions. The system replaces the factory air-boxes with proprietary twin high flow air filters feeding large diameter intake plumbing, carefully designed to minimize air turbulance for maximum intake air flow. The filters are actually relocated outside of the engine compartment, behind the front bumper and below the headlights, insulating the intake from under-hood heat. Additional heat shields are incorporated in order to block the flow of power-robbing hot air passing over the radiator. The system also includes modified fog light trim rings for a ram air effect at speed.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eOngoing development of the intake system revealed an interesting and significant discovery. Based upon exhaustive testing, it was determined that the stock location of the air temperature sensor within the Air Mass Meter was providing the engine management system with an artificially high reading, resulting in reduced power output. The culprit was determined to be ‘’heat soaking’’ of the Air Mass Meter when an adequate flow of air was not passing over it, such as in daily stop and go traffic, producing a reading substantially higher than the actual temperature of the air entering the intake system. BMW’s sophisticated engine management system would then automatically back off timing as a result, reducing available power until such time as the air flow cools the Air Mass Meter down. Therefore, the Dinan intake system includes an air temperature sensor reloaction kit as part of the system, providing the engine management system with a more accurate reading and consistent performance.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe cold air intake is crafted out of high quality black powder coated aluminum engraved with the Dinan logo.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2006 BMW 325I ALL\u003c\/li\u003e\n\u003cli\u003e2006 BMW 325XI ALL\u003c\/li\u003e\n\u003cli\u003e2006 BMW 330XI ALL\u003c\/li\u003e\n\u003cli\u003e2006-2007 BMW 330I ALL\u003c\/li\u003e\n\u003cli\u003e2007-2008 BMW 328XI ALL\u003c\/li\u003e\n\u003cli\u003e2007-2011 BMW 328I ALL\u003c\/li\u003e\n\u003cli\u003e2009-2011 BMW 328I XDRIVE ALL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31914696015945,"sku":"DIN D760-9000","price":761.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-Intake-System-Multiple-BMW-Fitments-D760-9000.jpg?v=1744473880"},{"product_id":"dinan-intake-system-1999-2003-bmw-540i-d760-0620","title":"Dinan Intake System | 1999 - 2003 BMW 540I (D760-0620)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eDinan Intake System\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe design goal for the Dinan High Flow Cold Air Intake System was very specific: ensure that the powerful engine is breathing plenty of cool oxygen rich air for maximum performance under varying driving conditions. The system replaces the factory air-boxes with proprietary twin high flow air filters feeding large diameter intake plumbing, carefully designed to minimize air turbulance for maximum intake air flow. The filters are actually relocated outside of the engine compartment, behind the front bumper and below the headlights, insulating the intake from under-hood heat. Additional heat shields are incorporated in order to block the flow of power-robbing hot air passing over the radiator. The system also includes modified fog light trim rings for a ram air effect at speed.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eOngoing development of the intake system revealed an interesting and significant discovery. Based upon exhaustive testing, it was determined that the stock location of the air temperature sensor within the Air Mass Meter was providing the engine management system with an artificially high reading, resulting in reduced power output. The culprit was determined to be ‘’heat soaking’’ of the Air Mass Meter when an adequate flow of air was not passing over it, such as in daily stop and go traffic, producing a reading substantially higher than the actual temperature of the air entering the intake system. BMW’s sophisticated engine management system would then automatically back off timing as a result, reducing available power until such time as the air flow cools the Air Mass Meter down. Therefore, the Dinan intake system includes an air temperature sensor reloaction kit as part of the system, providing the engine management system with a more accurate reading and consistent performance.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe cold air intake is crafted out of high quality black powder coated aluminum engraved with the Dinan logo.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1999-2003 BMW 540I ALL\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31914696048713,"sku":"DIN D760-0620","price":640.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-Intake-System-1999-2003-BMW-540I-D760-0620.jpg?v=1744473884"},{"product_id":"dinan-underdrive-pulley-kit-2008-2013-bmw-m3-d560-0004","title":"Dinan Underdrive Pulley Kit | 2008-2013 BMW M3 (D560-0004)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003e2008-2013 BMW M3 Underdrive Pulley Kit by Dinan\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eDinan's underdrive pulley is designed to increase power (11 horsepower 8400 RPM \n\nand 7 lb-ft torque 8400 RPM on a stock car) by reducing parasitic drag on the engine from spinning \n\nthe alternator, water pump and AC compressor. This is accomplished by slowing down the speed of \n\nthese accessory drives that rob power from your engine.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eDinan has done extensive hot weather testing so you can be assured that your \n\nengine is safe. The Dinan underdrive pulley is made of aircraft quality 6061 alloy. is anodized \n\nblack and does not modify your harmonic damper as some underdrive pulley kits do which can be \n\nharmful to your engine.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e+11 HP @ 8400 RPM \/ +7 lb\/ft @ 8400 RPM\u003c\/li\u003e\n\u003cli\u003eMade from 6061 aircraft aluminum \u0026amp; black anodized\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEliminates parasitic drag from accessories\u003c\/li\u003e\n\u003cli\u003eExtensively tested to ensure proper cooling system operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note: BMW changed the belt configuration from a single-sided power steering and \n\nAC belt to a double-sided belt for M3's that were produced after May 2008. Please check with your \n\ndealer to find the correct Dinan part number below.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2008-2013 BMW M3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - Underdrive Pulley Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReferences\u003c\/h3\u003e \n\u003cul\u003e \n\u003cli\u003e\u003ca href=\"https:\/\/documents.dinancars.com\/d560-0004.pdf\" target=\"_blank\"\u003eInstallation \n\nInstructions\u003c\/a\u003e\u003c\/li\u003e \n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31929182912585,"sku":"DIN D560-0004","price":645.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-Underdrive-Pulley-Kit-2008-2013-BMW-M3-D560-0004.jpg?v=1744483429"},{"product_id":"dinan-carbon-fiber-strut-tower-brace-multiple-bmw-fitments-d180-0012","title":"Dinan Carbon Fiber Strut Tower Brace | Multiple BMW Fitments (D180-0012)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eDinan Carbon Fiber Strut Tower Brace\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe Dinan Carbon FiberStrut\/Shock Tower Brace is built from aerospace quality aluminum and carbon fiber. The amazingly strong carbon fiber rod is held in place with black powdercoated forged aluminum ends connecting to black powercoated brackets. Adding this beautiful piece will improve chassis rigidity between the rear shock towers. This beautiful carbon fiber brace may be installed in conjunction with any of the Dinan suspension systems or the stock components.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAerospace Quality Carbon Fiber \u0026amp; Aluminum\u003c\/li\u003e\n\u003cli\u003eMounts In Stock Location\u003c\/li\u003e\n\u003cli\u003eImproved Chassis Rigidity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cb\u003ePosition: \u003c\/b\u003eFront\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2011 BMW 335I ALL\u003c\/li\u003e\n\u003cli\u003e2011 BMW 335I XDRIVE ALL\u003c\/li\u003e\n\u003cli\u003e2011-2013 BMW 335I ALL\u003c\/li\u003e\n\u003cli\u003e2011-2013 BMW 335I XDRIVE ALL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31932662054985,"sku":"DIN D180-0012","price":1199.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-Carbon-Fiber-Strut-Tower-Brace-Multiple-BMW-Fitments-D180-0012.jpg?v=1744484906"},{"product_id":"dinan-carbon-fiber-strut-tower-brace-multiple-bmw-fitments-d180-0010","title":"Dinan Carbon Fiber Strut Tower Brace | Multiple BMW Fitments (D180-0010)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eDinan Carbon Fiber Strut Tower Brace\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe Dinan Carbon FiberStrut\/Shock Tower Brace is built from aerospace quality aluminum and carbon fiber. The amazingly strong carbon fiber rod is held in place with black powdercoated forged aluminum ends connecting to black powercoated brackets. Adding this beautiful piece will improve chassis rigidity between the rear shock towers. This beautiful carbon fiber brace may be installed in conjunction with any of the Dinan suspension systems or the stock components.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAerospace Quality Carbon Fiber \u0026amp; Aluminum\u003c\/li\u003e\n\u003cli\u003eMounts In Stock Location\u003c\/li\u003e\n\u003cli\u003eImproved Chassis Rigidity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cb\u003ePosition: \u003c\/b\u003eFront\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2007-2010 BMW 335I ALL\u003c\/li\u003e\n\u003cli\u003e2008-2010 BMW 135I ALL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31932662087753,"sku":"DIN D180-0010","price":1008.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-Carbon-Fiber-Strut-Tower-Brace-Multiple-BMW-Fitments-D180-0010.jpg?v=1744484908"},{"product_id":"dinan-carbon-fiber-strut-tower-brace-multiple-bmw-fitments-d180-0008","title":"Dinan Carbon Fiber Strut Tower Brace | Multiple BMW Fitments (D180-0008)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eDinan Carbon Fiber Strut Tower Brace\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe Dinan Carbon FiberStrut\/Shock Tower Brace is built from aerospace quality aluminum and carbon fiber. The amazingly strong carbon fiber rod is held in place with black powdercoated forged aluminum ends connecting to black powercoated brackets. Adding this beautiful piece will improve chassis rigidity between the rear shock towers. This beautiful carbon fiber brace may be installed in conjunction with any of the Dinan suspension systems or the stock components.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAerospace Quality Carbon Fiber \u0026amp; Aluminum\u003c\/li\u003e\n\u003cli\u003eMounts In Stock Location\u003c\/li\u003e\n\u003cli\u003eImproved Chassis Rigidity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cb\u003ePosition: \u003c\/b\u003eRear\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2004-2005 BMW 545I ALL\u003c\/li\u003e\n\u003cli\u003e2004-2007 BMW 525I ALL\u003c\/li\u003e\n\u003cli\u003e2004-2007 BMW 530I ALL\u003c\/li\u003e\n\u003cli\u003e2006-2007 BMW 525XI ALL\u003c\/li\u003e\n\u003cli\u003e2006-2007 BMW 530XI ALL\u003c\/li\u003e\n\u003cli\u003e2006-2010 BMW 550I ALL\u003c\/li\u003e\n\u003cli\u003e2006-2010 BMW M5 ALL\u003c\/li\u003e\n\u003cli\u003e2008 BMW 528XI ALL\u003c\/li\u003e\n\u003cli\u003e2008-2010 BMW 528I ALL\u003c\/li\u003e\n\u003cli\u003e2008-2010 BMW 535I ALL\u003c\/li\u003e\n\u003cli\u003e2009-2010 BMW 528I XDRIVE ALL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31932662153289,"sku":"DIN D180-0008","price":672.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-Carbon-Fiber-Strut-Tower-Brace-Multiple-BMW-Fitments-D180-0008.jpg?v=1744484910"},{"product_id":"dinan-carbon-fiber-strut-tower-brace-multiple-bmw-fitments-d180-0007a","title":"Dinan Carbon Fiber Strut Tower Brace | Multiple BMW Fitments (D180-0007A)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eDinan Carbon Fiber Strut Tower Brace\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe Dinan Carbon FiberStrut\/Shock Tower Brace is built from aerospace quality aluminum and carbon fiber. The amazingly strong carbon fiber rod is held in place with black powdercoated forged aluminum ends connecting to black powercoated brackets. Adding this beautiful piece will improve chassis rigidity between the rear shock towers. This beautiful carbon fiber brace may be installed in conjunction with any of the Dinan suspension systems or the stock components.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAerospace Quality Carbon Fiber \u0026amp; Aluminum\u003c\/li\u003e\n\u003cli\u003eMounts In Stock Location\u003c\/li\u003e\n\u003cli\u003eImproved Chassis Rigidity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cb\u003ePosition: \u003c\/b\u003eFront\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2004-2005 BMW 545I ALL\u003c\/li\u003e\n\u003cli\u003e2004-2005 BMW 645CI ALL\u003c\/li\u003e\n\u003cli\u003e2004-2007 BMW 525I ALL\u003c\/li\u003e\n\u003cli\u003e2004-2007 BMW 530I ALL\u003c\/li\u003e\n\u003cli\u003e2006-2007 BMW 525XI ALL\u003c\/li\u003e\n\u003cli\u003e2006-2007 BMW 530XI ALL\u003c\/li\u003e\n\u003cli\u003e2006-2010 BMW 550I ALL\u003c\/li\u003e\n\u003cli\u003e2006-2010 BMW 650I ALL\u003c\/li\u003e\n\u003cli\u003e2006-2010 BMW M5 ALL\u003c\/li\u003e\n\u003cli\u003e2006-2010 BMW M6 ALL\u003c\/li\u003e\n\u003cli\u003e2008 BMW 528XI ALL\u003c\/li\u003e\n\u003cli\u003e2008-2010 BMW 528I ALL\u003c\/li\u003e\n\u003cli\u003e2008-2010 BMW 535I ALL\u003c\/li\u003e\n\u003cli\u003e2009-2010 BMW 528I XDRIVE ALL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31932662186057,"sku":"DIN D180-0007A","price":879.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-Carbon-Fiber-Strut-Tower-Brace-Multiple-BMW-Fitments-D180-0007A.jpg?v=1744484911"},{"product_id":"dinan-carbon-fiber-strut-tower-brace-2008-2013-bmw-m3-d180-0011","title":"Dinan Carbon Fiber Strut Tower Brace | 2008 - 2013 BMW M3 (D180-0011)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eDinan Carbon Fiber Strut Tower Brace\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe Dinan Carbon FiberStrut\/Shock Tower Brace is built from aerospace quality aluminum and carbon fiber. The amazingly strong carbon fiber rod is held in place with black powdercoated forged aluminum ends connecting to black powercoated brackets. Adding this beautiful piece will improve chassis rigidity between the rear shock towers. This beautiful carbon fiber brace may be installed in conjunction with any of the Dinan suspension systems or the stock components.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAerospace Quality Carbon Fiber \u0026amp; Aluminum\u003c\/li\u003e\n\u003cli\u003eMounts In Stock Location\u003c\/li\u003e\n\u003cli\u003eImproved Chassis Rigidity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cb\u003ePosition: \u003c\/b\u003eFront\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e2008-2013 BMW M3 ALL\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31932662120521,"sku":"DIN D180-0011","price":848.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-Carbon-Fiber-Strut-Tower-Brace-2008-2013-BMW-M3-D180-0011.jpg?v=1744484913"},{"product_id":"dinan-carbon-fiber-air-intake-strut-tower-brace-multiple-bmw-fitments-d760-44","title":"Dinan Carbon Fiber Air Intake \u0026 Strut Tower Brace | Multiple BMW Fitments (D760-0044)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eDinan Carbon Fiber Air Intake \u0026amp; Strut Tower Brace\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe Dinan carbon fiber intake looks as good as it performs, allowing more outside air to be pushed into the engine via twin-ducts while also providing structural stiffness to the strut towers. Two new air inlets are added, each with its own high flow filter mounted into the mouth of the carbon fiber inlet. The stock air inlet is fully functional to provide four intakes into the engine for maximum airflow. The filtered air passes from the inlets into the black powder coated ducts then directly into the engine.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eWith very little room to work with under the hood the team came up with the ingenious idea of combining the shock tower brace and the inlet tube into one part. The results are beautiful and purposeful looking.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThis product is not legal for sale or use in California, or states that have adopted California emissions standards, on any pollution controlled motor vehicles.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMore Power +10 HP \u0026amp; +8 lb-ft of Torque (with Software Upgrade)\u003c\/li\u003e\n\u003cli\u003eBeautiful Dual Carbon Fiber Inlets\u003c\/li\u003e\n\u003cli\u003eIntegrated Strut Tower Brace\u003c\/li\u003e\n\u003cli\u003eStock System Stays Completely Functional\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2013-2015 BMW 750I ALL\u003c\/li\u003e\n\u003cli\u003e2013-2015 BMW 750I XDRIVE ALL\u003c\/li\u003e\n\u003cli\u003e2013-2015 BMW 750LI ALL\u003c\/li\u003e\n\u003cli\u003e2013-2015 BMW 750LI XDRIVE ALL\u003c\/li\u003e\n\u003cli\u003e2013-2015 BMW ALPINA B7 ALL\u003c\/li\u003e\n\u003cli\u003e2013-2015 BMW ALPINA B7 XDRIVE ALL\u003c\/li\u003e\n\u003cli\u003e2013-2015 BMW ALPINA B7L ALL\u003c\/li\u003e\n\u003cli\u003e2013-2015 BMW ALPINA B7L XDRIVE ALL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31932662218825,"sku":"DIN D760-0044","price":3521.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-Carbon-Fiber-Air-Intake-Strut-Tower-Brace-Multiple-BMW-Fitments-D760-0044_f90029d8.jpg?v=1744484924"},{"product_id":"dinan-carbon-fiber-air-intake-strut-tower-brace-multiple-bmw-fitments-d760-33","title":"Dinan Carbon Fiber Air Intake \u0026 Strut Tower Brace | Multiple BMW Fitments (D760-0033)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eDinan Carbon Fiber Air Intake \u0026amp; Strut Tower Brace\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe Dinan carbon fiber intake looks as good as it performs, allowing more outside air to be pushed into the engine via twin-ducts while also providing structural stiffness to the strut towers. Two new air inlets are added, each with its own high flow filter mounted into the mouth of the carbon fiber inlet. The stock air inlet is fully functional to provide four intakes into the engine for maximum airflow. The filtered air passes from the inlets into the black powder coated ducts then directly into the engine.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eWith very little room to work with under the hood the team came up with the ingenious idea of combining the shock tower brace and the inlet tube into one part. The results are beautiful and purposeful looking.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThis product is not legal for sale or use in California, or states that have adopted California emissions standards, on any pollution controlled motor vehicles.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMore Power +10 HP \u0026amp; +8 lb-ft of Torque (with Software Upgrade)\u003c\/li\u003e\n\u003cli\u003eBeautiful Dual Carbon Fiber Inlets\u003c\/li\u003e\n\u003cli\u003eIntegrated Strut Tower Brace\u003c\/li\u003e\n\u003cli\u003eStock System Stays Completely Functional\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2009-2012 BMW 750I ALL\u003c\/li\u003e\n\u003cli\u003e2009-2012 BMW 750LI ALL\u003c\/li\u003e\n\u003cli\u003e2010-2012 BMW 750I XDRIVE ALL\u003c\/li\u003e\n\u003cli\u003e2010-2012 BMW 750LI XDRIVE ALL\u003c\/li\u003e\n\u003cli\u003e2011-2012 BMW ALPINA B7 ALL\u003c\/li\u003e\n\u003cli\u003e2011-2012 BMW ALPINA B7 XDRIVE ALL\u003c\/li\u003e\n\u003cli\u003e2011-2012 BMW ALPINA B7L ALL\u003c\/li\u003e\n\u003cli\u003e2011-2012 BMW ALPINA B7L XDRIVE ALL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31932662317129,"sku":"DIN D760-0033","price":3521.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-Carbon-Fiber-Air-Intake-Strut-Tower-Brace-Multiple-BMW-Fitments-D760-0033_f222ce15.jpg?v=1744484937"},{"product_id":"dinan-carbon-fiber-air-intake-strut-tower-brace-multiple-bmw-fitments-d760-32","title":"Dinan Carbon Fiber Air Intake \u0026 Strut Tower Brace | Multiple BMW Fitments (D760-0032)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eDinan Carbon Fiber Air Intake \u0026amp; Strut Tower Brace\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe Dinan carbon fiber intake looks as good as it performs, allowing more outside air to be pushed into the engine via twin-ducts while also providing structural stiffness to the strut towers. Two new air inlets are added, each with its own high flow filter mounted into the mouth of the carbon fiber inlet. The stock air inlet is fully functional to provide four intakes into the engine for maximum airflow. The filtered air passes from the inlets into the black powder coated ducts then directly into the engine.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eWith very little room to work with under the hood the team came up with the ingenious idea of combining the shock tower brace and the inlet tube into one part. The results are beautiful and purposeful looking.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThis product is not legal for sale or use in California, or states that have adopted California emissions standards, on any pollution controlled motor vehicles.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMore Power +10 HP \u0026amp; +8 lb-ft of Torque (with Software Upgrade)\u003c\/li\u003e\n\u003cli\u003eBeautiful Dual Carbon Fiber Inlets\u003c\/li\u003e\n\u003cli\u003eIntegrated Strut Tower Brace\u003c\/li\u003e\n\u003cli\u003eStock System Stays Completely Functional\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2011-2013 BMW 550I ALL\u003c\/li\u003e\n\u003cli\u003e2011-2013 BMW 550I XDRIVE ALL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31932662251593,"sku":"DIN D760-0032","price":3521.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-Carbon-Fiber-Air-Intake-Strut-Tower-Brace-Multiple-BMW-Fitments-D760-0032_6f5b9ee7.jpg?v=1744484948"},{"product_id":"dinan-carbon-fiber-air-intake-strut-tower-brace-multiple-bmw-fitments-d760-36","title":"Dinan Carbon Fiber Air Intake \u0026 Strut Tower Brace | Multiple BMW Fitments (D760-0036)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eDinan Carbon Fiber Air Intake \u0026amp; Strut Tower Brace\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe Dinan carbon fiber intake looks as good as it performs, allowing more outside air to be pushed into the engine via twin-ducts while also providing structural stiffness to the strut towers. Two new air inlets are added, each with its own high flow filter mounted into the mouth of the carbon fiber inlet. The stock air inlet is fully functional to provide four intakes into the engine for maximum airflow. The filtered air passes from the inlets into the black powder coated ducts then directly into the engine.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eWith very little room to work with under the hood the team came up with the ingenious idea of combining the shock tower brace and the inlet tube into one part. The results are beautiful and purposeful looking.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThis product is not legal for sale or use in California, or states that have adopted California emissions standards, on any pollution controlled motor vehicles.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMore Power +10 HP \u0026amp; +8 lb-ft of Torque (with Software Upgrade)\u003c\/li\u003e\n\u003cli\u003eBeautiful Dual Carbon Fiber Inlets\u003c\/li\u003e\n\u003cli\u003eIntegrated Strut Tower Brace\u003c\/li\u003e\n\u003cli\u003eStock System Stays Completely Functional\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2013-2015 BMW 550I GT ALL\u003c\/li\u003e\n\u003cli\u003e2013-2015 BMW 550I GT XDRIVE ALL\u003c\/li\u003e\n\u003cli\u003e2014-2015 BMW 550I ALL\u003c\/li\u003e\n\u003cli\u003e2014-2015 BMW 550I XDRIVE ALL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31932662284361,"sku":"DIN D760-0036","price":3521.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-Carbon-Fiber-Air-Intake-Strut-Tower-Brace-Multiple-BMW-Fitments-D760-0036_74e8476c.jpg?v=1744484962"},{"product_id":"dinan-aluminum-strut-tower-brace-multiple-bmw-fitments-d180-0462","title":"Dinan Aluminum Strut Tower Brace | Multiple BMW Fitments (D180-0462)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eDinan Aluminum Strut Tower Brace\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eDinan’s Strut Tower Brace helps maintain the structural integrity of the towers over the life of the vehicle as well as providing sharper handling by reducing flex under harder cornering conditions. The attractive brushed aluminum and carbon fiber braces may be installed in conjunction with any of the Dinan Suspension Systems or the stock components. The end brackets are machined for precise fitment over the strut tower reinforcements for a clean and solid installation.\u003c\/p\u003e\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePosition: \u003c\/b\u003eFront\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1999-2000 BMW 323I ALL\u003c\/li\u003e\n\u003cli\u003e1999-2000 BMW 328I ALL\u003c\/li\u003e\n\u003cli\u003e2000 BMW 323CI ALL\u003c\/li\u003e\n\u003cli\u003e2000 BMW 328CI ALL\u003c\/li\u003e\n\u003cli\u003e2001-2005 BMW 325I ALL\u003c\/li\u003e\n\u003cli\u003e2001-2005 BMW 330I ALL\u003c\/li\u003e\n\u003cli\u003e2001-2005 BMW 330XI ALL\u003c\/li\u003e\n\u003cli\u003e2001-2006 BMW 325CI ALL\u003c\/li\u003e\n\u003cli\u003e2001-2006 BMW 330CI ALL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31932674703433,"sku":"DIN D180-0462","price":575.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-Aluminum-Strut-Tower-Brace-Multiple-BMW-Fitments-D180-0462.jpg?v=1744485637"},{"product_id":"dinan-aluminum-strut-tower-brace-multiple-bmw-fitments-d180-0390","title":"Dinan Aluminum Strut Tower Brace | Multiple BMW Fitments (D180-0390)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eDinan Aluminum Strut Tower Brace\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eDinan’s Strut Tower Brace helps maintain the structural integrity of the towers over the life of the vehicle as well as providing sharper handling by reducing flex under harder cornering conditions. The attractive brushed aluminum and carbon fiber braces may be installed in conjunction with any of the Dinan Suspension Systems or the stock components. The end brackets are machined for precise fitment over the strut tower reinforcements for a clean and solid installation.\u003c\/p\u003e\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cb\u003ePosition: \u003c\/b\u003eFront\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1997-2000 BMW 528I ALL\u003c\/li\u003e\n\u003cli\u003e1997-2003 BMW 540I ALL\u003c\/li\u003e\n\u003cli\u003e2000-2003 BMW M5 ALL\u003c\/li\u003e\n\u003cli\u003e2001-2003 BMW 525I ALL\u003c\/li\u003e\n\u003cli\u003e2001-2003 BMW 530I ALL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31932674670665,"sku":"DIN D180-0390","price":735.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-Aluminum-Strut-Tower-Brace-Multiple-BMW-Fitments-D180-0390.jpg?v=1744485639"},{"product_id":"dinan-aluminum-strut-tower-brace-multiple-bmw-fitments-d180-0362","title":"Dinan Aluminum Strut Tower Brace | Multiple BMW Fitments (D180-0362)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2 style=\"font-size:1.3rem;\"\u003eDinan Aluminum Strut Tower Brace\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eDinan’s Strut Tower Brace helps maintain the structural integrity of the towers over the life of the vehicle as well as providing sharper handling by reducing flex under harder cornering conditions. The attractive brushed aluminum and carbon fiber braces may be installed in conjunction with any of the Dinan Suspension Systems or the stock components. The end brackets are machined for precise fitment over the strut tower reinforcements for a clean and solid installation.\u003c\/p\u003e\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePosition: \u003c\/b\u003eFront\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1992-1995 BMW 325I ALL\u003c\/li\u003e\n\u003cli\u003e1995-1999 BMW M3 ALL\u003c\/li\u003e\n\u003cli\u003e1996-1999 BMW 328I ALL\u003c\/li\u003e\n\u003cli\u003e1997-2000 BMW Z3 ALL\u003c\/li\u003e\n\u003cli\u003e1998-1999 BMW 323I ALL\u003c\/li\u003e\n\u003cli\u003e1998-2000 BMW Z3 M ROADSTER\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":31932674736201,"sku":"DIN D180-0362","price":640.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/5151\/products\/Dinan-Aluminum-Strut-Tower-Brace-Multiple-BMW-Fitments-D180-0362.jpg?v=1744485640"}],"url":"https:\/\/www.mobileigo.com\/collections\/dinan.oembed","provider":"mobileiGo.com","version":"1.0","type":"link"}